Página de la tienda
Stormworks: Build and Rescue
Todo Discusiones Capturas Artwork Retransmisiones Vídeos Workshop Noticias Guías Reseñas

Stormworks: Build and Rescue

Página de la tienda
Stormworks: Build and Rescue >  Workshop > Workshop de Uran_Wind > ZE 6-gear Auto/Manual Transmission
ZE 6-gear Auto/Manual Transmission
Descripción Discusiones0 Comentarios36 Notas sobre cambios
36 comentarios
< >
Lucky Tiny Storm 8 MAR a las 10:37 
The gear start changing too early wich causes the wheels to slip.
Uran_Wind  [autor] 31 DIC 2024 a las 11:57 
Check if all gear ratios are correct, and make sure the engine has enough power for higher gears.
Alfraido 30 DIC 2024 a las 11:41 
I believe i have everything connected correctly, but i am facing a problem where it runs fine in neutral, first, second (where it reaches 29mph top speed) and then the engine immediately stalls and cannot run with gears 3 4 or 5. Any idea on what could be causing that?
Uran_Wind  [autor] 30 DIC 2024 a las 5:03 
Insert an extra gearbox between the torque meter and wheels, and adjust its gear ratio.
Alfraido 29 DIC 2024 a las 20:51 
How would i adjust the ratio to get 29mph top speed, or any certain speed? It seems a bit dumb to randomly change ratios until a speed is reached (which i have not yet achieved)
Uran_Wind  [autor] 28 DIC 2024 a las 11:18 
Yes, you can use all items from the workshop by default, unless the author explicitly prohibits it.
My_Name_is_Bear 28 DIC 2024 a las 8:46 
can i use this on my creations if i link it?
dsed22 14 DIC 2024 a las 17:08 
ive been trying to make a gtr skyline but only revers and one gear work also if you run the clutch trrough a elec motor u go faster
DerAtomherbst 1 DIC 2024 a las 18:47 
I've been tryna make an MC that allows this MC to be controlled by a throttle lever

I kinda have it but it's funky and really weird
Ω Compu 26 NOV 2024 a las 7:48 
can an option for number of reverse gears be added? would be useful for tractors
ghost 11 NOV 2024 a las 8:58 
If you put on 3 gear
off 9:5 on 3:2
You'll have more speed
Uran_Wind  [autor] 10 AGO 2024 a las 12:43 
Make sure you connected the RPS node from the torque meter, installed after the 4-th gearbox.
Weird Uncle 10 AGO 2024 a las 12:35 
it generally does not seem to work, even though it seems set up correctly. I am unable to get it to shift when in auto, even though the RPS well exceeds its shifting point
Weird Uncle 10 AGO 2024 a las 2:00 
no matter what I try with any of my vehicles, there's always too much wheel spin due to the transmission, causing the wheels to spin into a burnout. The only way to fix it is by limiting the power output through the clutch, but it has to be limited so much that my max speed always ends up being a crawl.
LiefErik 97 22 ENE 2024 a las 9:44 
I really like this transmission, the setup is compact but highly versatile. I would like if it had a built in clutch controller though.
F25 Key 24 MAY 2023 a las 4:10 
can you add an option to make the default mode park like in the full drive controller?
Graztoked 31 MAR 2023 a las 15:48 
Ill make that adjustment with the visual indicators that might be what was confusing me. Thanks a bunch! ill delete my boat spam to keep ur amasing controller comments clean!
Uran_Wind  [autor] 30 MAR 2023 a las 23:49 
All gears and reverse works fine, the low gear has indicator value of 2 instead of 1.
Uran_Wind  [autor] 29 MAR 2023 a las 23:26 
Make sure all gearboxes and torque meter are assembled and oriented in correct order.
Shaquille Oatmeal 4 NOV 2022 a las 7:00 
ok thanks
Uran_Wind  [autor] 4 NOV 2022 a las 5:35 
Yes, probably. Try to increase the clutch smoothly.
Shaquille Oatmeal 4 NOV 2022 a las 4:44 
so it could be that my car is too heavy?
Uran_Wind  [autor] 3 NOV 2022 a las 23:49 
Engine can stall if the torque load is too high even on first gear, although its overall gear ratio is 0.14 . Anyway, check that the directions and ratios of all gearboxes are correct.
Shaquille Oatmeal 3 NOV 2022 a las 6:17 
i put this on a car im reworking and when i put it in gear and put the clutch to 1, the engine slows down until it stalls, maybe the OFF Ratios are still not well enough geared down? any alternative gear ratios you know of?
Uran_Wind  [autor] 5 ABR 2022 a las 10:26 
It is an optional node for indicationg the current mode or gear, you can left it unconnected.
That Guy 5 ABR 2022 a las 2:57 
how do you set up Auto mode | current gear
Uran_Wind  [autor] 29 ENE 2022 a las 10:54 
Fixed, also clutch value should be 1 during acceleration in order to shift gears correctly.
muhammedexplosive911 29 ENE 2022 a las 10:06 
doesnt change from gear 3 to 4 when reaches desired rps
OOM-7 22 FEB 2021 a las 23:35 
How do I display gears on 7 segments in automatic mode?
Uran_Wind  [autor] 7 ENE 2021 a las 22:02 
This is the controller only for the set of gearboxes, and it dont have the clutch control since it may depends on preferences of car handling. You may use other controller for the clutch, or just connect the ws seat axis to it.
TUSK771 7 ENE 2021 a las 18:10 
I'm using this Micro on a vehicle, not sure where to connect the clutch, there is the Auto/ current left open ? when i try in manual. engine keep stalling ?
Uran_Wind  [autor] 17 OCT 2020 a las 1:41 
It is only the gearbox controller without a clutch or brakes, and the gear ratio at N is similar to the ratio of first gear. So, add the clutch which disengages at N. Also you may use my full-fledged car drive controller having all basic features.
umtiti 17 OCT 2020 a las 1:14 
yes i fixed it now. Now the vehicle does not stop at N
Uran_Wind  [autor] 16 OCT 2020 a las 17:08 
Did you set the correct gear ratio on the 4-th gearbox and switch the gear shifting buttons to the push mode?
umtiti 16 OCT 2020 a las 10:57 
reverse is broken
Facelesswaffel 2 SEP 2020 a las 10:47 
I'm using it on a boat but I can't seem to get reverse to work in automatic mode.