Halaman Toko
Stormworks: Build and Rescue
Semua Diskusi Screenshot Ilustrasi Siaran Video Workshop Berita Panduan Ulasan

Stormworks: Build and Rescue

Halaman Toko
Stormworks: Build and Rescue >  Workshop > Workshop Uran_Wind > ZE 6-gear Auto/Manual Transmission
ZE 6-gear Auto/Manual Transmission
Deskripsi Diskusi0 Komentar36 Catatan Perubahan
36 Komentar
< >
Lucky Tiny Storm 8 Mar @ 10:37am 
The gear start changing too early wich causes the wheels to slip.
Uran_Wind  [pembuat] 31 Des 2024 @ 11:57am 
Check if all gear ratios are correct, and make sure the engine has enough power for higher gears.
Alfraido 30 Des 2024 @ 11:41am 
I believe i have everything connected correctly, but i am facing a problem where it runs fine in neutral, first, second (where it reaches 29mph top speed) and then the engine immediately stalls and cannot run with gears 3 4 or 5. Any idea on what could be causing that?
Uran_Wind  [pembuat] 30 Des 2024 @ 5:03am 
Insert an extra gearbox between the torque meter and wheels, and adjust its gear ratio.
Alfraido 29 Des 2024 @ 8:51pm 
How would i adjust the ratio to get 29mph top speed, or any certain speed? It seems a bit dumb to randomly change ratios until a speed is reached (which i have not yet achieved)
Uran_Wind  [pembuat] 28 Des 2024 @ 11:18am 
Yes, you can use all items from the workshop by default, unless the author explicitly prohibits it.
My_Name_is_Bear 28 Des 2024 @ 8:46am 
can i use this on my creations if i link it?
dsed22 14 Des 2024 @ 5:08pm 
ive been trying to make a gtr skyline but only revers and one gear work also if you run the clutch trrough a elec motor u go faster
DerAtomherbst 1 Des 2024 @ 6:47pm 
I've been tryna make an MC that allows this MC to be controlled by a throttle lever

I kinda have it but it's funky and really weird
Ω Compu 26 Nov 2024 @ 7:48am 
can an option for number of reverse gears be added? would be useful for tractors
ghost 11 Nov 2024 @ 8:58am 
If you put on 3 gear
off 9:5 on 3:2
You'll have more speed
Uran_Wind  [pembuat] 10 Agu 2024 @ 12:43pm 
Make sure you connected the RPS node from the torque meter, installed after the 4-th gearbox.
Weird Uncle 10 Agu 2024 @ 12:35pm 
it generally does not seem to work, even though it seems set up correctly. I am unable to get it to shift when in auto, even though the RPS well exceeds its shifting point
Weird Uncle 10 Agu 2024 @ 2:00am 
no matter what I try with any of my vehicles, there's always too much wheel spin due to the transmission, causing the wheels to spin into a burnout. The only way to fix it is by limiting the power output through the clutch, but it has to be limited so much that my max speed always ends up being a crawl.
LiefErik 97 22 Jan 2024 @ 9:44am 
I really like this transmission, the setup is compact but highly versatile. I would like if it had a built in clutch controller though.
F25 Key 24 Mei 2023 @ 4:10am 
can you add an option to make the default mode park like in the full drive controller?
Graztoked 31 Mar 2023 @ 3:48pm 
Ill make that adjustment with the visual indicators that might be what was confusing me. Thanks a bunch! ill delete my boat spam to keep ur amasing controller comments clean!
Uran_Wind  [pembuat] 30 Mar 2023 @ 11:49pm 
All gears and reverse works fine, the low gear has indicator value of 2 instead of 1.
Uran_Wind  [pembuat] 29 Mar 2023 @ 11:26pm 
Make sure all gearboxes and torque meter are assembled and oriented in correct order.
Shaquille Oatmeal 4 Nov 2022 @ 7:00am 
ok thanks
Uran_Wind  [pembuat] 4 Nov 2022 @ 5:35am 
Yes, probably. Try to increase the clutch smoothly.
Shaquille Oatmeal 4 Nov 2022 @ 4:44am 
so it could be that my car is too heavy?
Uran_Wind  [pembuat] 3 Nov 2022 @ 11:49pm 
Engine can stall if the torque load is too high even on first gear, although its overall gear ratio is 0.14 . Anyway, check that the directions and ratios of all gearboxes are correct.
Shaquille Oatmeal 3 Nov 2022 @ 6:17am 
i put this on a car im reworking and when i put it in gear and put the clutch to 1, the engine slows down until it stalls, maybe the OFF Ratios are still not well enough geared down? any alternative gear ratios you know of?
Uran_Wind  [pembuat] 5 Apr 2022 @ 10:26am 
It is an optional node for indicationg the current mode or gear, you can left it unconnected.
That Guy 5 Apr 2022 @ 2:57am 
how do you set up Auto mode | current gear
Uran_Wind  [pembuat] 29 Jan 2022 @ 10:54am 
Fixed, also clutch value should be 1 during acceleration in order to shift gears correctly.
muhammedexplosive911 29 Jan 2022 @ 10:06am 
doesnt change from gear 3 to 4 when reaches desired rps
OOM-7 22 Feb 2021 @ 11:35pm 
How do I display gears on 7 segments in automatic mode?
Uran_Wind  [pembuat] 7 Jan 2021 @ 10:02pm 
This is the controller only for the set of gearboxes, and it dont have the clutch control since it may depends on preferences of car handling. You may use other controller for the clutch, or just connect the ws seat axis to it.
TUSK771 7 Jan 2021 @ 6:10pm 
I'm using this Micro on a vehicle, not sure where to connect the clutch, there is the Auto/ current left open ? when i try in manual. engine keep stalling ?
Uran_Wind  [pembuat] 17 Okt 2020 @ 1:41am 
It is only the gearbox controller without a clutch or brakes, and the gear ratio at N is similar to the ratio of first gear. So, add the clutch which disengages at N. Also you may use my full-fledged car drive controller having all basic features.
umtiti 17 Okt 2020 @ 1:14am 
yes i fixed it now. Now the vehicle does not stop at N
Uran_Wind  [pembuat] 16 Okt 2020 @ 5:08pm 
Did you set the correct gear ratio on the 4-th gearbox and switch the gear shifting buttons to the push mode?
umtiti 16 Okt 2020 @ 10:57am 
reverse is broken
Facelesswaffel 2 Sep 2020 @ 10:47am 
I'm using it on a boat but I can't seem to get reverse to work in automatic mode.