Steam Workshop::wack

Created by tom_is_unlucky

Save Recovery Allows your saves to load if they contain things that were in a removed mod. Warning: The items from removed mods will still be removed from your game, it just won't crash when loading. Source on Github This requires BepInEx and a modloader i...

CCTV

Created by WIKUS

https://i.imgur.com/JsFKGv3.png This is a Plugin Mod. It requires Bepinex to be installed with the StationeersLaunchPad plugin. See: https://github.com/StationeersLaunchPad/StationeersLaunchPad https://i.imgur.com/c3qYm69.png Adds ItemKitCCTV,CircuitboardC...

ZoopMod [StationeersMods]

Created by Nivvdiy

ZoopMod WARNING: This mod requires the StationeersLaunchPad Plugin Mod and BepInEx to be installed. For installation, see the detailed guide at https://github.com/StationeersLaunchPad/StationeersLaunchPad If you have StationeersMods installed, please remov...

LargeConsoleMod

Created by WIKUS

https://i.imgur.com/kWF8yPT.png This is a Plugin Mod. It requires Bepinex to be installed with the StationeersLaunchPad plugin. See: https://github.com/StationeersLaunchPad/StationeersLaunchPad https://i.imgur.com/c3qYm69.png Adds ItemKitLargeConsole to St...

SpotlightsMod

Created by WIKUS

https://i.imgur.com/8FCFvME.png This is a Plugin Mod. It requires Bepinex to be installed with the StationeersLaunchPad plugin. See: https://github.com/StationeersLaunchPad/StationeersLaunchPad https://i.imgur.com/c3qYm69.png Adds ItemKitSpotlight to Stati...

KeypadMod

Created by WIKUS

https://i.imgur.com/eSJs3l5.png This is a Plugin Mod. It requires Bepinex to be installed with the StationeersLaunchPad plugin. See: https://github.com/StationeersLaunchPad/StationeersLaunchPad https://i.imgur.com/c3qYm69.png Adds ItemKitKeypad to Statione...

LaunchSiloMod

Created by WIKUS

https://i.imgur.com/ETBpfEe.png This is a Plugin Mod. It requires Bepinex to be installed with the StationeersLaunchPad plugin. See: https://github.com/StationeersLaunchPad/StationeersLaunchPad https://i.imgur.com/c3qYm69.png Adds ItemKitLaunchSilo to Stat...

FPGA

Created by tom_is_unlucky

FPGA This requires BepInEx and a modloader installed. Try out StationeersLaunchPad. (also compatible with StationeersMods) The FPGA mod lets you replace a big pile of logic devices with one configurable chip. Connect it with a few Logic Readers and Writers...

FloodLightMod

Created by WIKUS

https://i.imgur.com/PQ8tdxM.png This is a Plugin Mod. It requires Bepinex to be installed with the StationeersLaunchPad plugin. See: https://github.com/StationeersLaunchPad/StationeersLaunchPad https://i.imgur.com/c3qYm69.png Adds a variety of flood lights...

LettersMod

Created by WIKUS

https://i.imgur.com/c56PPiE.png This is a Plugin Mod. It requires Bepinex to be installed with the StationeersLaunchPad plugin. See: https://github.com/StationeersLaunchPad/StationeersLaunchPad https://i.imgur.com/c3qYm69.png Adds small,medium and large le...

FilterCleanerMod

Created by WIKUS

https://i.imgur.com/dduR7uS.png This is a Plugin Mod. It requires Bepinex to be installed with the StationeersLaunchPad plugin. See: https://github.com/StationeersLaunchPad/StationeersLaunchPad https://i.imgur.com/c3qYm69.png Adds ItemKitFilterCleaner to S...

LibConstruct

Created by tom_is_unlucky

LibConstruct This is a library for custom placement in Stationeers. It does nothing on its own but provides functionality to other mods. Currently this provides the board surface placement and base piece connections in Modular Consoles. Source on Github Th...

ModularConsoleMod

Created by tom_is_unlucky

This is a Plugin Mod. It requires Bepinex to be installed with the StationeersLaunchPad plugin. See: https://github.com/StationeersLaunchPad/StationeersLaunchPad Modular Console Mod Build the Control Center You Always Wanted This mod adds modular console s...

Arc Furnace Automatization_v2

Created by Art1985

Venting control system added. Add gas sensors and active vents to the furnace room on the same cable as IC. ...

Onboard Combustion Centrifuge Controller

Created by LiddulBOFH

Place this in the chip slot on the combustion centrifuge. Optionally, connect a diode slider to d0 (progress slider and indicator) This will handle everything from startup to idle shutdown, as well as unloading Currently setup to handle oxygen-volatiles m...

Combustion Centrifuge Adaptive Quadratic Control

Created by Ryexandra

Combustion Centrifuge automation One chip installed in the machine, no outside IC Housing or sensor needed. Optional "Ejection Override" lever on d0. Adapts perfectly to *any* fuel ratio using Oxygen or Nitrous. Even a mix of the two. Works by calculating ...

[F&S] Room Temperature Control

Created by 123

Description Allows you to control the temperature in the room within the specified limits. This scheme works fine in small rooms and use hysteresis method to prevent unwanted rapid switching. Requirements 1 IC Housing. 1 Integrated Circuit (IC10). 1 Gas Se...

[F&S] Solar Panel Tracking

Created by 123

Description Tracks the position of the sun, at night moves to the position of the sunrise. Optionally can turn on the light at nightfall, at the beginning of the morning, turns off the light. Works for Moon, Mars, Europa, Vulcano, and any modified suns an...

[F&S] Emergency Power System

Created by 123

Description Automaticaly turn on a generator(s)(Solid/Gas) when there is a low energy in batteries. Supports unlimited generators. Turns on generator(s) if charge less then 5%. Turns off generator(s) if charge more then 50%. Requirements 1 IC Housing. 1 In...

[F&S] Semi-Automatic Crafting Station

Created by 123

Description Sets the desired number of products and disables production when the specified value is reached. Requirements 1 IC Housing. 1 Integrated Circuit (IC10). 1 Any crafting station. 1 Stacker. 1 Chute corner. 1 (Optional) Led Display showing the de...

[F&S] Toggle Lights & Doors

Created by 123

Description Switches the lighting state when entering and exiting the room. Additionally can open doors with pxoximity sensor. Requirements 1 Occupancy Sensor (Kit Sensors) 1 IC Housing. 1 Integrated Circuit (IC10). Any type of (Kit Lights) instead of Wal...

[F&S] MaxMin Switch

Created by 123

Description Turns on the specified device at the maximum value and turns it off when the minimum value is reached. Requirements 1 IC Housing. 1 Integrated Circuit (IC10). 1 Any device that needs to be turned on / off depending on the data 1 Any analyzer or...

[F&S] MinMax Switch

Created by 123

Description Turns on the specified device at the minimum value and turns it off when the maximum value is reached. Requirements 1 IC Housing. 1 Integrated Circuit (IC10). 1 Any device that needs to be turned on / off depending on the data 1 Any analyzer or...

[F&S] Industrial Heat Pump

Created by 123

BROKEN Description Controls the temperature within the specified limits. Can be used to maintain the temperature in rooms, hydroponics, cool or heat gases and liquids to the desired level. Can transfer a large amount of heat energy, up to 1 MJ (1000 wall h...

[F&S] Full Auto Airlock

Created by 123

Description Fully automated airlock, just build and forget. Works in all kinds of modes, atmosphere to vacuum, atmosphere to atmosphere, vacuum to vacuum. Automatically equalizes pressure between transitions to different parts of the base (Unlike a in-game...

[F&S] Full Auto Airlock (Light Version)

Created by 123

Description Fully automated airlock, just build and forget. Retains the existing atmosphere in the pipe when the airlock closes, and release it when the same side is going to open again. Does not check the pressure behind the doors, if you need it, read th...

[F&S] Remote Buttons For Airlock

Created by 123

Description If you are using doors that do not have buttons (blastdoor, etc.), then you will need to remotely control the airlock. Requirements 1 IC Housing. 1 Integrated Circuit (IC10). 1 Kit (Logic Switch) type Button. (Optional) 1 Kit (Logic Transmitter...

[F&S] Logic Reader\Writer\Batch

Created by 123

Description Does the same as the logic circuits reader/writer/batch, replaces 6 devices. Requirements 1 IC Housing. 1 Integrated Circuit (IC10). IC ports description Port Device D0 Logic Reader 1 (Optional) D1 Logic Reader 2 (Optional) D2 Logic Reader 3 (...

[F&S] Filtration Ratio Control

Created by 123

Description Set the filtering threshold and when the ratio is reached, the filtering is turned off. Automatically determines the filter type and sets the filtering to the desired value. Requirements 1 Integrated Circuit (IC10). 1 Kit (Atmospherics) type F...

[F&S] Timer Relay

Created by 123

Description Turns on/off the specified devices at set intervals. Can turn on/off in batch mode. Requirements 1 IC Housing. 1 Integrated Circuit (IC10). IC ports description Port Device D0 Device to turn On/Off (Optional) Changeable values in IC code # Wai...

Precision Gas Mixer H2_o2

Created by Suge

This fully automatic gas mixer gets around temperature differentials by using 2 volume pumps instead of a gas mixer. This will ensure a correct mix of fuel regardless of temperature variance in your gases. The script will automatically keep your fuel tank(...

Power Display with time to charge or deplete

Created by Emilgardis

Calculates and displays the time left until batteries are fully charged or depleted, based on current power usage and generation rates. Requires a Cable Analyzer and some batteries....

Wireless power alignment

Created by JustWill

A script to align two wireless power transmitters with options for different power port directions. The video demo starts at 6:28 Original code here: Original code here: https://discord.com/channels/276525882049429515/392081193614704640/906560061499916330...

Automaton

Created by TryCatch

Automate your manufactory - machines and stackers! Features: - up to 3 machines and 3 stackers - toggle stacker when machine turned on/off - turns off machine and stacker when idle for 45 seconds - ejects from stacker before turning it off - craft exact a...

Smeltery

Created by TryCatch

Smart and cheap furnace for great station! Based on Betelgeuse's build https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=2008412047 , I like his work but I want to melt ices too :) Benefits: - easy to build and set up - automated pressure and tempera...

Advanced Smeltery

Created by TryCatch

Let's smelt everything in single advanced furnace! Benefits: - single circuit solution - automated pressure and temperature control - quickly melts all known alloys and ores in a safe way - automatically ejects alloy when ready - moderate fuel consumption ...

Adaptive Airlock

Created by TryCatch

Drop-in replacement for the vanilla airlock. Features: - automatically measure pressure on both sides, no need to set it somewhere - work as advanced airlock or simple(e.g. with vacuum outside) - level indicator for pressurization process - emergency mode ...

Device Mirror

Created by TryCatch

Utility that allows up to 6 devices to share behavior and settings and work as one. There is no single device with a special role in taking charge(like Master and slaves), there you have a peer-to-peer distribution model. That means that you can interact w...

Vend Dispenser

Created by TryCatch

Configurable storage for items, keeps track of their quantity and ejects the exact amount as needed(optional). Setup: Basic - you will need a Vending machine, a Console with a Hash display and LED console(to display the quantity), a Dial, a Button and IC h...

Vend Packager

Created by TryCatch

Accumulates items and ejects only full stacks. Very convenient to use in the ore sorting system, instead of dozens of stackers and sorters. Setup you will need 1 Stacker, 1 Sorter, 1 Vending machine and IC housing with circuit for sure. After the Vending m...

AIMeE Base controller V2

Created by CowsAreEvil

Updated for wireless batteries and added waypoint. Control AIMeE from a transmitter on your base. Update for use of wireless batteries. Place a wireless charger at the unload point and AIMeE will wait for the battery to charge before returning to mining. ...

Printer Logistics V3

Created by CowsAreEvil

Printer controller and ingot restocker This is my latest version of my printer controller. It allows you to select the number of items you want to print on the stacker and then press go and the printer will stop when the desired number of items have been ...

Auto Bypass Airlock

Created by CowsAreEvil

Auto bypass airlock This will operate as an airlock until the rooms on either side of the airlock are the same and then the light will go green and it will operate as a bypass bulkhead allowing you to pass through without waiting for the airlock cycle bu...

AIMEE Mining Bot Automated

Created by Rocket

This script can be used in an AIMEE Mining Bot to get it to automatically mine and unload its contents into a nearby Chute Inlet or Bin. Note: you must change the TargetX, TargetY, and TargetZ coordinates to the location of your Chute Inlet / Bin Once the...

Centrifuge Startup

Created by ShadowDrake082

Starts up any centrifuge fuel mix. This logic code uses some maths and stuff to start up a combustion centrifuge. Export to the chip and slot it on a combustion centrifuge and it should start it up, open it up automatically when it gets full, and ramp up ...

Satellite Dish Controller

Created by CowsAreEvil

Locate and interrogate traders automatically without any effort. All you have to do is check the computer every now and then to see what has been found and call them in for landing. Install the dial to the system and it will only find the selected trader...

RA's Automated Dish Script v1.1

Created by Remarkably Average —

...