Stormworks: Build and Rescue

Stormworks: Build and Rescue

평점이 부족합니다.
ZE Smart Railroad Signals Controller
   
어워드
즐겨찾기
즐겨찾기됨
즐겨찾기 해제
태그: v1.10.9
파일 크기
게시일
업데이트일
164.266 KB
2023년 10월 3일 오전 7시 23분
2024년 4월 16일 오후 8시 56분
업데이트 노트 5개 (보기)

다운로드 위해 구독하기
ZE Smart Railroad Signals Controller

설명
Place the physics sensor in the middle between the track rails and keep its orientation.

A controller subassembly for the smart railroad signals addon that should be installed on the train locomotive.
  • Indicates the state of the one signal ahead and of the one signal behind the train on the track it currently occupy, and can switch that signals individually. Works correctly if there are several signals near the train, and if the correct signal is not the closest one to the train.
  • Maximum distance of operation is 150 - 50 meters, depending on track curvature. Switches the signal only after receiving its state, but you can pre-hold the switch button before entering into the signal area if your train is moving too fast.
  • Uses radio frequency 4401 to transmit its position and orientation, and frequencies 4402 and 4403 to receive the signals state.
  • Place the physics sensor in the middle between the track rails and keep its orientation. You can split the other parts and place them anywhere you like.
  • Works for the signals in both directions simultaneously. Install both instrument panels correspondingly if your locomotive has two cabs, or only one panel for the corresponding single cab.
  • If you are using two separate controllers in the rolling stock locomotives that are connected back-to-back, it will be active only in one direction of the signal that is closest to any locomotive.
  • Replace the constant on part with the button to disable the constant radio broadcast on frequency 4401.
댓글 3
Uran_Wind  [작성자] 2025년 10월 24일 오전 11시 04분 
I learned it myself with official LUA guides.
128 m/s gaming 2025년 10월 24일 오전 10시 48분 
How do you knowing how to scripting or where did you have learned
Uran_Wind  [작성자] 2023년 10월 4일 오전 7시 18분 
If signals controller doesn't work, make sure you have updated the addon to the latest version.