Store Page
Stormworks: Build and Rescue
All Discussions Screenshots Artwork Broadcasts Videos Workshop News Guides Reviews

Stormworks: Build and Rescue

Store Page
Stormworks: Build and Rescue >  Workshop > Uran_Wind's Workshop
Not enough ratings
ZE Smart Railroad Signals Controller
Description Discussions0 Comments1 Change Notes
   
Award
Favorite
Favorited
Unfavorite
Vehicles: Vehicle, Land, Subassembly, Advanced
Tags: v1.10.9
File Size
Posted
Updated
164.266 KB
3 Oct, 2023 @ 7:23am
16 Apr, 2024 @ 8:56pm
5 Change Notes ( view )
Required items
This item requires all of the following other items
Created by
Uran_Wind
Offline
See all 97 collections (some may be hidden)
2,381 Unique Visitors
1,163 Current Subscribers
38 Current Favorites

Subscribe to download
ZE Smart Railroad Signals Controller

Description
Place the physics sensor in the middle between the track rails and keep its orientation.

A controller subassembly for the smart railroad signals addon that should be installed on the train locomotive.
  • Indicates the state of the one signal ahead and of the one signal behind the train on the track it currently occupy, and can switch that signals individually. Works correctly if there are several signals near the train, and if the correct signal is not the closest one to the train.
  • Maximum distance of operation is 150 - 50 meters, depending on track curvature. Switches the signal only after receiving its state, but you can pre-hold the switch button before entering into the signal area if your train is moving too fast.
  • Uses radio frequency 4401 to transmit its position and orientation, and frequencies 4402 and 4403 to receive the signals state.
  • Place the physics sensor in the middle between the track rails and keep its orientation. You can split the other parts and place them anywhere you like.
  • Works for the signals in both directions simultaneously. Install both instrument panels correspondingly if your locomotive has two cabs, or only one panel for the corresponding single cab.
  • If you are using two separate controllers in the rolling stock locomotives that are connected back-to-back, it will be active only in one direction of the signal that is closest to any locomotive.
  • Replace the constant on part with the button to disable the constant radio broadcast on frequency 4401.
1 Comments
< >
Uran_Wind  [author] 4 Oct, 2023 @ 7:18am 
If signals controller doesn't work, make sure you have updated the addon to the latest version.