ชุมชน Steam :: Tracks × Retaining Walls

หน้าร้านค้า

Transport Fever 2

ทั้งหมด กระดานสนทนา ภาพหน้าจอ อาร์ตเวิร์ก ถ่ายทอดสด วิดีโอ เวิร์กชอป ข่าวสาร คู่มือ บทวิจารณ์

Transport Fever 2 > เวิร์กชอป > เวิร์กชอปของ Enzojz > Tracks × Retaining Walls

Tracks × Retaining Walls

คำอธิบาย กระดานสนทนา5 ความเห็น77 หมายเหตุการเปลี่ยนแปลง

77 ความเห็น

< >

Aruna 4 ก.พ. @ 2: 40pm

Will there possibly be an asset version so you can custom build with your textures?

Black Swan 4 ต.ค. 2024 @ 2: 29pm

Thank you very much.

Enzojz [ผู้สร้าง] 1 ต.ค. 2024 @ 11: 47am

@Black Swan I think normally most of mods should not get broken under the new version, except CommonAPI which is actually a binary hack of the game. My mods got break changes because the game integrated the shader enhancement mod under my request and dev's wish for running ultimate station on console.

The 1.2 version is here: https://github.com/Enzojz/track_x_retaining_walls_1/archive/f7f98a5e0250eda160c310599cd056ca1756fec0.zip

Black Swan 30 ก.ย. 2024 @ 10: 34am

I can't. There are a lot of mods that wont work with the new update. For now yours the only script mod that has been updated. So how do I get your mod to a former version?

Enzojz [ผู้สร้าง] 30 ก.ย. 2024 @ 8: 04am

@Black Swan You need to update the game

Black Swan 27 ก.ย. 2024 @ 2: 39pm

what did you do in the last update? mod wont work any longer because of a "UV_MODE_WORLD" used in your material. how do I undo that change?

mmcomes2u 1 ส.ค. 2024 @ 4: 57am

super

Enzojz [ผู้สร้าง] 17 พ.ค. 2022 @ 4: 14pm

@kijioijin Normally it should not, but you can have a try with 0hb and some bridge mods only to see if it works.

kido 16 พ.ค. 2022 @ 11: 36pm

@Enzojz Steam will automatically update mods. I don't know the reason, but seems like something is conflicting with 0hB, and only in the bridge selection menu.

Enzojz [ผู้สร้าง] 16 พ.ค. 2022 @ 3: 26pm

@JuggernautOfWar @kijioijin I have tried here, it seems work without any problem. If it's an extension to existing bridge, the selection will be ignored, or have you the mod updated (there was an update for the game update)

kido 16 พ.ค. 2022 @ 8: 02am

@Enzojz

I believe so. Zero height bridge menu seems to not be in sync with the actual bridge chosen.

Enzojz [ผู้สร้าง] 16 พ.ค. 2022 @ 7: 14am

@JuggernautOfWar I will check this tonight, it may be caused by the game update

JuggernautOfWar 15 พ.ค. 2022 @ 3: 02pm

I am having issues getting these to work alongside your zero height bridge mod. I enable zero height bridge, select one of the bridges in this mod pack from the list, and the bridge just does not change at all away from any of the vanilla ones. I do see the custom ones appearing in the selector list though.
Any thoughts?

silencer4 2 เม.ย. 2022 @ 1: 20pm

Would be cool if those nicely joined with the flying junction.

Enzojz [ผู้สร้าง] 1 ม.ค. 2022 @ 1: 10pm

@Jimbo_1977 Anyrhing in stdout?

Jimbo_1977 28 ธ.ค. 2021 @ 10: 27am

Having trouble with these in last few days, has stopped working for me in conjunction with your zero height bridge mod for some reason.

kido 17 ส.ค. 2021 @ 6: 14pm

@Sterben I think you're using the bridges made with a hole on one side.

Wilhelm924 17 ส.ค. 2021 @ 10: 34am

Not a fan,
I tried to make something similar to photo 1, with the half walls, but there are holes on the high side I can't correct.

Enzojz [ผู้สร้าง] 10 ก.ค. 2021 @ 8: 00am

@Melon_Lord They are bridges

Melon_Lord 10 ก.ค. 2021 @ 5: 39am

@enzojz theres no option for these too be added to tracks as they are being built? is there a key bind or a setting im missing

blackwizard1812 26 เม.ย. 2021 @ 9: 38am

hi, thx for all your great mods.
Is possible to do this: https://gtm.steamproxy.vip/ugc/865113912180225042/8DD14DA1F43E1C0D95B8140DE12EC1F67F94430F/ as your TF-1 mod allowed?
I know that it is possible on switch/crossover from your track-design-pattern, but just for plain track ?

mcGreen 13 มี.ค. 2021 @ 2: 07pm

The textures of this mod seem a bit lacking, they look very flat and onedimensional. Is it possible for you to improve them?

Grissom 6 มี.ค. 2021 @ 5: 18am

Immer wenn ich die JR-Brücke ohne Pfeiler baue gibt es in der Stdout die Fehlermeldung
Texture load error: file name empty
Texture load error: file name without extension: E:/Transport Fever 2/steamapps/workshop/content/1066780/1997683453/res/textures/

Und gehe ich in das Asset kommt folgende Fehlermeldung in der Stdout:
Legacy warning: ground texture keys should end with '.lua': none
Legacy warning: ground texture keys should end with '.lua': none
Legacy warning: ground texture keys should end with '.lua': none
Legacy warning: ground texture keys should end with '.lua': none

Alessandra 22 ม.ค. 2021 @ 7: 32am

@enzojz I’ll try that thx

Alessandra 22 ม.ค. 2021 @ 7: 02am

@enzojz thanks would be amazing. than you can use this bridge a lot more when you can have Train and roads cross under need it

Alessandra 21 ม.ค. 2021 @ 4: 07pm

@enzojz https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=2369528312 like this can you make the bridge also cut out the tracks below or a road if you work with a road

Alessandra 21 ม.ค. 2021 @ 3: 18pm

will you make the wall version also able to adjust to crossing Roads and train tracks

TerrAnaut_AT 19 ม.ค. 2021 @ 2: 53am

ah ok thx

Krabat1994 19 ม.ค. 2021 @ 12: 37am

After the latest Update it works fine.THX for the fix

TerrAnaut_AT 19 ม.ค. 2021 @ 12: 24am

I have the game crash also after the update

ラビ・ジエール 18 ม.ค. 2021 @ 8: 22pm

检测到和最新版本不兼容，使用后游戏崩溃弹出。新地图也无法使用。移除该mod后问题解决但是原存档没办法打开了

Dourbracken 18 ม.ค. 2021 @ 7: 58pm

Yup, can confirm that this works.

Anthoam 18 ม.ค. 2021 @ 6: 56pm

It might be a debugging thing left by the author ^^

Anthoam 18 ม.ค. 2021 @ 6: 54pm

I've found a quickfix, remove "local dump = require "luadump"" from the arch_wall.lua in 1066780\1997683453\res\config\bridge folder.

Revelations 18 ม.ค. 2021 @ 6: 47pm

Is there a way to go about manually reverting to 1.0 in the meantime until the issue is fixed?

VanHam 18 ม.ค. 2021 @ 6: 40pm

Yeah same issue, crashes now. was working fine yesterday

Kâmpfzwêrg 18 ม.ค. 2021 @ 5: 39pm

Game crashes with the new version :-( res\config\bridge\arch_wall.lua

Thaddel 18 ม.ค. 2021 @ 5: 39pm

Crash on load with the latest version.

GrandT 18 ม.ค. 2021 @ 4: 57pm

I just reverted to the previous version and my map loads fine, definitely something up with 1.1. My save game for the Swiss Alps series on the Workshop will crash with the current version.

The Devil you know 18 ม.ค. 2021 @ 4: 49pm

can confirm crash on load (vers.1.1)

GrandT 18 ม.ค. 2021 @ 4: 44pm

This seems to be crashing on load currently (possibly since your update?), I'm going to try reverting it.

CC Johnson 22 พ.ย. 2020 @ 12: 03pm

Great work, thank you so very much.
But what I can't find is a solid brick wallin arch pattern with "fence". Am I too stupid or isn't it there? That one I'd really like, please.
Also, many one sided versions seem to have a gap between track and wall. Maybe I'm doing something wrong?

Jagerfly 15 ต.ค. 2020 @ 3: 38am

are for anyone else the walls just bright yellow or white?

kido 13 ต.ค. 2020 @ 9: 43am

Because it was posted during the outbreak.

Valkyrie 13 ต.ค. 2020 @ 8: 48am

Might I ask why you're saying this in your description?
"Keep fighting, Wuhan!
Keep fighting, Hubei!
Keep fighting, China!"
What's the reasons for this?