Please, would you consider adding some sort of config file or Options to change the kTDU heat output and/or the power usage?

From my testing, this mod still seems to work as intended - i.e., no issues.

That said, I'm disappointed that the Condenser only produces a mere 120kDTU - same as the heat removed from the output. To be realistic - in real life - nothing is 100% heat and energy efficient, but apparently this is. The fact that the Condenser consumes 1200W should mean that it should produce far more heat than the output. That electricity has to go somewhere and in real life it nearly always gets converted into heat. This Condenser is too good, making the Thermo Regulator and Aquatuner quite obsolete.

For the sake of game balance, that 120kDTU should be radically increased. At a minimum, it should be doubled , if not increased from 5 to 10 times. In my testing, 2 Condensers working nonstop could not even make enough heat to noticeably increase the water temp in a small room, let alone produce steam (to run the Turbine I had above).

Works great with https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=1818138009
Set Thermo Regulator to nearly liquid temperature and precool gas for condenser.

Well, it works as described, taking ages to condense hydrogen.

There is some kind of an issue with mixed inputs : when the condenser gets mixed gases as input, it cools them down as soon as there is 30kg of any one of them but only outputs what caused the process to start and keeps the other liquids. It lacks something like an "empty storage" command, or maybe to eject everything at the end of a cooling cycle.

Yes, scientifically it should, but the game does not consider that, as you can see in the aquatuner. I used the exact same math that building uses.

How can the condenser cools down the gaz to 5° below its condentation point whatever its input temperature is and yet cools it the fixed rate of 120kDTU ? Does it take more time when the temperature difference is higher ?

I will look into that, possibly caused by the recent updates to the game

The building keeps changing whether it's behind other stuff (tempshift plates, cables) or in front. Could you make it be always in front?

Oh I see, I can change that. I had the same issue with polluted water/oxygen not dropping the correct materials

Could it be possible to make it so when you condense sour gas into methane you the condenser drops some sulfur onto the ground as I have a few sour gas condensers and I have a mod that needs sulfur to improve geysers.

The rest too please ^^
And thank you

Sure I can make a melter :D

And it would be cool if you add a pipe heater and cooler device too.

what about a melter and soldifer? :D
Great for ice and ore to ingot.
And please make a collection mod wich include all 4 possibilities at once (looks more clean).

@magequitpie thanks!

I do not have the DLC and I am not yet sure how the compatibility works, but I will try to figure it out!

PLEASE update for DLC Spaced Out!! (and Vaporizer)

Would be amazing if you could put a setting bar on this (and probably the vaperizer) to control the kDTUs. It would adjust the power consumption, cooling rate, and area heat rate all together.

Main reason is that cooling something like hydrogen takes quite a while even at 120 kDTUs. 30 kg of hydrogen requires 23,558,400 total DTUs to cool from 70 C (minimum electrolyzer output temp) to 257.2 (5 below condensation point), which takes 196.32s in one of these, which is about 153 grams per second per machine. Thus to fully consume a full ventilation line of hydrogen (1 kg/s), you'd need 7 of these suckers (well, 6.544, but close enough).

If I could dial the cooling on it, at the cost of higher heat output and power consumption, it'd make my build more compact and easily managed. Maybe make the power consumption scale more than linearly (ie. 240 kDTUs would take more than 2400 W) to compensate for the lower material cost of using a single machine dialed up to a higher cooling rate.

这是我的第一个模型，它看起来像是工作！（耶！）



这个模型增加了一个新的建筑“冷凝器”，它可以吸收30公斤的气体并将其冷凝成液体。（冷凝点以下5度）

也许最好是把液态氢输送到火箭或其他东西上，它蒸发得很快：p



它需要1200W，产生120kDTU，并以120kDTU的速率冷却内容物。它可以被淹没，就像Aquatuner一样。



如果你对mods有任何建议/想法或改进，请告诉我！



mod已更新为自动化更新！

我为迟到道歉，我被一些问题缠住了！



我的github： https://github.com/beatlepie/ONI-Mods

@mike yes, it should work now, if you have any problems/ideas please don't hesitate to bring it up!

@fadibar, that link didn't work.
Is this updated to work with the latest release?

@fadibar
Do same for Vaporizer please

Good mod, but it seems incompatible with the latest upgrade now. Hoping it works soon!

NICE

I am currently busy due to school work, but I will update as soon as I can!

Starts candle light vigil for update....the sour gas condenser is the best thing ever

Broken by automation update :'(

need update. thx.

Love this mod, but doesn't seem to load after Automation Pack upgrade

The mod is now working as intended, I split it to Vaporizer and Condenser, since condenser is very useful but vaporizer isn't very useful. Please tell me if something doesn't work or you would like this building to be more "balanced".

I am thinking of changing the vaporizer to something like an ice melter, I will get to that eventually :p
If you have any suggestions or ideas don't hesitate to tell me! I would love to try making more mods :D

Gonna do the same because condensing oxygen / hydrogen would be so, so much simpler if you could just pass it though the thermoregultor.
You can do it mate !

I'm going to subscribe, favorite, and upvote this in hopes that you get it up and working. I don't think the devs at Klei really understand how infuriating it is to not be able to do a proper heat exchanger setup that allows for evaporation and condensation of the cooling/heating medium.

I'm marking this as Favorite because I like the idea of this, and would love to see it when functional. You got this, @magequitpie! :D

keeping the gas like hydrogen in a liquid form for any distance?

@magequitpie https://forums.kleientertainment.com/forums/topic/107833-tutorial-how-to-create-a-basic-mod-for-oni/
step 8 explains where to copy it, just as a small starting help maybe...

Currently it does not work, sorry! :p
I uploaded it because I don't know how else to load it into the game.
Though yes @Alaysian you are correct!

If I had to guess, it allows liquids to evaporate and gasses to condense without the pipes taking damage/breaking. Am I wrong @magequitpie ?

Okay, so... What does it do?