Subscribe to download
[GDI] HBT-Mammoth

The HBT-Mammoth is designed for riding light to moderately difficult terrain in planetary gravity and atmospheric conditions.

---

GDI Military Library Reference
In 2039, GDI ceased production of its famous Mammoth Mk.II walker due to cost and reliability issues. This decision drew the ire of many, including retired war hero Nick “Havoc” Parker. However, production of the Mammoth Mk.III was scheduled for Reykjavik at the same time. The Mammoth Mk.III is designed for long range operations in the harsh conditions of the Yellow and Red Zones. The Mammoth Mk.III has four independent crawler belts and thick multi-faceted armor to meet any threat head-on. The Mammoth Mk.III is armed with two 150mm guns and a pair of rocket launcher sets specifically designed to counter infantry and aircraft.

---

(this model is based on an improvement replacing the large caliber guns with gauss guns)

Specifications :

• Mass: 204.49 t
  
• PCU: 12,042
  
• Working volume of cargo containers x1: 2.4 kL
  
• Number of small containers: 2
  
• Total volume of hydrogen tanks: 210 kL
  
• Number of small hydrogen tanks: 14
  
• Number of small batteries: 8
  
• Number of large batteries: 4
  
• Number of hydrogen engines: 4
  
• Number of programmable units: 4
  
• Number of course rails: 4
  
• Number of course RL: 4

QAB

Page 1

1. camera front view
   
2. M CTC control
   
3. M CTC focus locked target
   
4. M CTC cycle subsystems
   
5. camera aim L view
   
6. camera aim R view
   
7. light front on\off
   
8. TB turret stopper trigger now
   
9. CTC group AI on\off

Page 2

1. TB front soft/stiff switch
   
2. front stiff increase strength
   
3. front stiff decrease strength
   
4. front stiff decrease height offset
   
5. front stiff increase height offset
   
6. front soft increase strength
   
7. front soft decrease strength
   
8. front soft decrease height offset
   
9. front soft increase height offset

Page 3

1. TB rear soft/stiff switch
   
2. rear stiff increase strength
   
3. rear stiff decrease strength
   
4. rear stiff decrease height offset
   
5. rear stiff increase height offset
   
6. rear soft increase strength
   
7. rear soft decrease strength
   
8. rear soft decrease height offset
   
9. rear soft increase height offset

Page 4

1. camera front view
   
2. camera bottom 1 view
   
3. camera bottom 2 view
   
4. caera rear view
   
5. connector bottom switch lock
   
6. LCD wheel up\down on/off
   
7. jack reverse
   
8. engine on\off
   
9. light front on\off

Page 5

1. H2 tank stockpile on\off
   
2. battery recharge on\off
   
3. _
   
4. Wheels increase height
   
5. Wheels decrease height
   
6. _
   
7. PB TCES run rest
   
8. TB turret stopper
   

Used scripts
The following scripts are used in HBT-Mammoth :
WMI Radar - https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=1707280190&searchtext=Whip%27s+Turret+Based+Radar
TCES - https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=2753791447
SWCS - https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=1445055239

---

EDB Anker notifies the user that HBT-Mammoth is primarily a design work and a replica of the Mammoth tank Mk.III unit from Command & Conquer 3: Tiberium Wars. The HBT-Mammoth is not intended for any combat or survival use.

EDB Anker would like to extend a special thanks to player kennet0508 for his help in building and customizing the HBT-Mammoth subgrid suspension