Alpha: Stuck on "Bit Switch" level :: Turing Complete Discuții generale

Pagina din magazin

Turing Complete

Toate Discuții Capturi de ecran Ilustrații Difuzări Videoclipuri Știri Ghiduri Recenzii

Turing Complete > Discuții generale > Detaliile subiectului

swarm

19 iul. la 7:28

Alpha: Stuck on "Bit Switch" level

I'm using the standard design for this level, but on the 4th tick it's failing due to the output being none/grey rather than off.

< >

Se afișează 1-5 din 5 comentarii

Kacidest

22 iul. la 13:05

Tip:

You can connect two switches to the final output.

Spoiler:
Connect input one to switch one's input. Connect input two to a not, then to the first switch's toggle.

Connect input two to switch two's input. Connect input one to a not, then to the second switch's toggle.

Connect both switches to the final output.

swarm

23 iul. la 12:59

Postat inițial de Kacidest:
Tip:

You can connect two switches to the final output.

Spoiler:
Connect input one to switch one's input. Connect input two to a not, then to the first switch's toggle.

Connect input two to switch two's input. Connect input one to a not, then to the second switch's toggle.

Connect both switches to the final output.

That's exactly what I did. The problem is that on the 4th tick (both inputs on), the two switches are both giving no output (grey) instead of off (red) due to the switch toggles (bottom inputs) being off. This causes a combined output of grey rather than off.

I can move the NOTs to before the primary inputs of the switches, but that causes the same issue on the first tick (both inputs off).

(For context, I've beaten this game up to the point of building a custom 64-bit architecture with variable instruction width on the stable build)

Editat ultima dată de swarm; 23 iul. la 13:04