Alpha: Stuck on "Bit Switch" level :: Turing Complete 일반 토론

상점 페이지

Turing Complete

전체 토론 스크린샷 아트워크 방송 동영상 뉴스 가이드 평가

Turing Complete > 일반 토론 > 제목 정보

swarm

2025년 7월 19일 오전 7시 28분

Alpha: Stuck on "Bit Switch" level

I'm using the standard design for this level, but on the 4th tick it's failing due to the output being none/grey rather than off.

< >

전체 댓글 5개 중 1~5개 표시 중

Kacidest

2025년 7월 22일 오후 1시 05분

Tip:

You can connect two switches to the final output.

Spoiler:
Connect input one to switch one's input. Connect input two to a not, then to the first switch's toggle.

Connect input two to switch two's input. Connect input one to a not, then to the second switch's toggle.

Connect both switches to the final output.

swarm

2025년 7월 23일 오후 12시 59분

Kacidest 님이 먼저 게시:
Tip:

You can connect two switches to the final output.

Spoiler:
Connect input one to switch one's input. Connect input two to a not, then to the first switch's toggle.

Connect input two to switch two's input. Connect input one to a not, then to the second switch's toggle.

Connect both switches to the final output.

That's exactly what I did. The problem is that on the 4th tick (both inputs on), the two switches are both giving no output (grey) instead of off (red) due to the switch toggles (bottom inputs) being off. This causes a combined output of grey rather than off.

I can move the NOTs to before the primary inputs of the switches, but that causes the same issue on the first tick (both inputs off).

(For context, I've beaten this game up to the point of building a custom 64-bit architecture with variable instruction width on the stable build)

swarm 님이 마지막으로 수정; 2025년 7월 23일 오후 1시 04분