Space Engineers

Space Engineers

77 평점
Jump Drive Inhibitor
   
어워드
즐겨찾기
즐겨찾기됨
즐겨찾기 해제
Type: Mod
Mod category: Block
파일 크기
게시일
업데이트일
190.418 KB
2015년 7월 9일 오후 12시 08분
2017년 6월 2일 오전 7시 25분
업데이트 노트 13개 (보기)

다운로드 위해 구독하기
Jump Drive Inhibitor

설명
Made for vanilla Jump Drive!!


What is does

Prevents Ships from jumping out of its area of effect by powering down all Jump Drive Blocks.

Can only keep ships from leaving, not from entering (this is for technical reasons).

Area can be set via interface slider, based on beacon.

Players will see the Inhibitor when it is active (beacon).


Only works while standing still

For balancing reasons the Inhibitor is only preventing ships from jumping if the ship it is attached to is not moving, i.e. speed is 0 (or it was built on a Station).

Warning

If you try to force your Jump Drive online by using a self-triggering timer your drive will get damaged!
인기 토론 모두 보기(1)
6
2015년 10월 1일 오후 1시 09분
Feedback & Suggestions
fntc
댓글 74
Ren 2025년 7월 31일 오후 10시 07분 
Can a version of this mod be made without needing to be stationary for it to work?
Turret problems 2022년 4월 3일 오후 4시 29분 
Does this still work?
Bobothemonk 2019년 12월 2일 오후 9시 35분 
Can this mod be setup/edited to work on moving ships? Can the area of effect max range be reduced to 5km?
fntc  [작성자] 2019년 9월 1일 오전 10시 23분 
If you like you may do that
Danilka Dadapad 2019년 8월 18일 오전 3시 46분 
Can i mod this block to adjust max range?
Wraith 2018년 9월 28일 오후 7시 58분 
Just tested working as it describes uses laser antenna model now though
B1487E 2018년 4월 30일 오후 6시 06분 
Corsin, did you take a welder to your jump drives? That fixed it for me.
MagnusEffect 2017년 5월 10일 오전 5시 55분 
confirmed today it still works fine. does exactly what it says on the box.
MagnusEffect 2017년 5월 7일 오후 7시 34분 
so is this working or no?
Corsin 2017년 2월 22일 오후 1시 58분 
So, when i use this, it EMP's the jump drives in all the local ships...

Now when i turn the inhibitor off... all the local jump drives are stuck on red, and never come back online...