Kauppasivu
Space Engineers
Kaikki Keskustelut Kuvakaappaukset Taideteokset Suoratoistot Videot Workshop Uutiset Oppaat Arvostelut

Space Engineers

Kauppasivu
Space Engineers >  Workshop > Käyttäjän fntc Workshop
77 arvostelua
Jump Drive Inhibitor
Kuvaus Keskustelut1 Kommentit74 Muutokset
   
Palkinto
Lisää suosikkeihin
Lisätty suosikkeihin
Poista suosikeista
Type: Mod
Mod category: Block
Tiedostokoko
Julkaistu
Päivitetty
190.418 KB
9.7.2015 klo 12.08
2.6.2017 klo 7.25
13 muutosilmoitusta ( näytä )
Tekijä
fntc
Kirjautunut ulos
Näytä kaikki 289 kokoelmaa
9,351 Uniikkeja kävijöitä
2,105 Nykyiset tilaajat
161 Nykyiset suosikit

Tilaa ladataksesi
Jump Drive Inhibitor

Kuvaus
Made for vanilla Jump Drive!!


What is does

Prevents Ships from jumping out of its area of effect by powering down all Jump Drive Blocks.

Can only keep ships from leaving, not from entering (this is for technical reasons).

Area can be set via interface slider, based on beacon.

Players will see the Inhibitor when it is active (beacon).


Only works while standing still

For balancing reasons the Inhibitor is only preventing ships from jumping if the ship it is attached to is not moving, i.e. speed is 0 (or it was built on a Station).

Warning

If you try to force your Jump Drive online by using a self-triggering timer your drive will get damaged!
Suositut keskustelut Näytä kaikki (1)
6
1.10.2015 klo 13.09
Feedback & Suggestions
fntc
74 kommenttia
< >
Ren 31.7. klo 22.07 
Can a version of this mod be made without needing to be stationary for it to work?
Turret problems 3.4.2022 klo 16.29 
Does this still work?
Bobothemonk 2.12.2019 klo 21.35 
Can this mod be setup/edited to work on moving ships? Can the area of effect max range be reduced to 5km?
fntc  [tekijä] 1.9.2019 klo 10.23 
If you like you may do that
Danilka Dadapad 18.8.2019 klo 3.46 
Can i mod this block to adjust max range?
Wraith 28.9.2018 klo 19.58 
Just tested working as it describes uses laser antenna model now though
B1487E 30.4.2018 klo 18.06 
Corsin, did you take a welder to your jump drives? That fixed it for me.
MagnusEffect 10.5.2017 klo 5.55 
confirmed today it still works fine. does exactly what it says on the box.
MagnusEffect 7.5.2017 klo 19.34 
so is this working or no?
Corsin 22.2.2017 klo 13.58 
So, when i use this, it EMP's the jump drives in all the local ships...

Now when i turn the inhibitor off... all the local jump drives are stuck on red, and never come back online...