Butiksside
Stormworks: Build and Rescue
Alt Diskussioner Skærmbilleder Illustrationer Broadcasts Videoer Værksted Nyheder Guider Anmeldelser

Stormworks: Build and Rescue

Butiksside
Stormworks: Build and Rescue >  Værksted > C4RB0Ns værksted
Ikke nok vurderinger
Beacon Locator Buoy
Beskrivelse Diskussioner0 Kommentarer17 Ændringsbemærkninger
   
Pris
Føj til foretrukne
Gjort til foretrukken
Fjern som foretrukken
Vehicles: Vehicle, Air, Rescue, Sea, Multi-vehicle, Exploration, Technical, Creative, Underwater, Fire, Subassembly, Advanced
Tags: v0.10.17
Filstørrelse:
Offentliggjort:
242.479 KB
11. maj 2020 kl. 9:34
1 ændringsbemærkning ( vis )
Påkrævede emner
Dette emne kræver alle af de følgende andre emner
Links
På Youtube (External link) På Sketchfab (External link)
Designet af:
C4RB0N
Offline
Se alle 475 samlinger skabt af C4RB0N og andre folk (nogle kan være skjult)
3,913 Unikke besøgende
8,291 Nuværende abonnenter
85 Nuværende foretrukne

Abonner for at downloade
Beacon Locator Buoy

I 2 samlinger af C4RB0N
Airbus A400M Compatible Equipment
20 genstande
Beacon Locator System
2 genstande
Beskrivelse

Beacon Locator Buoy designed to be used with this Master Station to form a Beacon Locator Network

It can be easily air-dropped from my Airbus A400M Cargo Plane


The System:
This Beacon Locator Buoy + Master Station system allows to locate multiple Emergency Beacons on the map at the same time.

You can place multiple Buoys around the map (up to 60), and the use the Master Station to collect all the information from the Buoys (within 40km).
Accuracy depends on the amount and position of the Buoys: with with a good grid of Buoys you can have ~30-60m accuracy, with bad grid you will have ~100-300m accuracy.

For the best results, place the Buoys with a distance of ~10km between them.


Credits:
CrazyFluffyPony, for his Beacon Locator System




Enjoy! Please consider leaving a Rating and a Comment. Feel free to write any Suggestions or Issues you might have in the comments below.
17 kommentarer
< >
Janne 3. sep. 2024 kl. 12:52 
Is there a way to refill your plane with Buoys without despawning the ones you already deployed?
C4RB0N  [ophavsmand] 15. maj 2021 kl. 3:37 
@spacechaos202 Have a look at Pony's Beacon Locator System (https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=2060370662) , it's the one I used as the framework for mine, and it basically uses both GPS position of the Buoys, and the time between beacon pulses to triangulate the position of multiple Beacon Locators.
Trophy 14. maj 2021 kl. 18:54 
@C4RB0N Hi! I am working on my own beacon locator, but I can't for the life of me figure out how to turn transponder pings into distance from the time between them. If you're okay with sharing, could you please let me know how your system does this?
C4RB0N  [ophavsmand] 26. aug. 2020 kl. 10:34 
@KingTiger101 Well, that's still valid for the Buoys, since they don't have electric connectors. So remember not to exceed 180knots when transporting them, and to lock all the Cargo Tracks.
Elonovich Muskowinsky 26. aug. 2020 kl. 9:55 
@C4RB0N They were on. I read in another one of your creations' description, that the rails are not strong enough to hold things when going above 180 knots or something like that, so I just attacked a cargo crate with the iso connector and used it to block the buoys.
C4RB0N  [ophavsmand] 26. aug. 2020 kl. 3:44 
@KingTiger101 That's because you have to turn on the Cargo Zones rail brakes, from the Loadamaster's Station or Ramps Panel monitors.
They automatically turn on for 20 seconds when spawning, to prevent cargo from moving around freely, and allow you to manually lock the desired zones.
Elonovich Muskowinsky 25. aug. 2020 kl. 16:26 
For some reason they all gather at the back of the plane and get stuck. I have the rail connectors on.
C4RB0N  [ophavsmand] 23. aug. 2020 kl. 10:12 
@williefili Use a Bigger Workbench to spawn the A400M, and then copy-paste the Buoys inside.
williefili 23. aug. 2020 kl. 9:12 
1st of all i cant the creative base wont let me spawn the airbus and 2nd of all i have no clue how to use the select tool.
C4RB0N  [ophavsmand] 21. aug. 2020 kl. 11:53 
@williefili You can easily spawn them directly in the Cargo Bay by placing them with the Selection Tool in the Workbench.