is it just me or does the waiting passangers wait underground (invisible)

The asset works, sometimes there are issues with it but so far I've had no problems

is this asset working?

Does not spawn ships, despite moving nodes with Move It!

当您放置客运港时，船舶将停靠在离混凝土板/海岸线稍远的地方。解决此问题的方法是使用MoveIt！，选择客运码头前面的不可见节点，并使用箭头键将其移动到更靠近海岸线的位置。您的保存游戏将保存节点，但您必须对地图中放置的每个乘客码头进行保存

@Snagletooth, I was having the same problem and was using the extra the prop dock too, but then discovered how to select the passenger path with Move It. Using the single selection mode and also holding Alt and Shift keys at the same time, I could click on each node and segment to select. Making sure I had all the segments and nodes, I then used arrow keys to put the paths where I wanted them. Passenger ships now goes up to the dock without the extra dock extension. Looks much better.

As to why i mess with the road was two fold. i wanted to see how far away i could run a road and stay connected, but also I noticed everyone was walking right the place to go the next corner, cross the street opposite of the the dock, then walk back, then cross over again right in front of the place. Moving the road fixed that for most passengers. There's a few that still cross the street, but they do that before getting to the dock, not walking past it and coming back.

Trucks on cargo were also a small issue. They would get to the dock, then turn away from the dock to despawn. When i moved the road back as far as it would go, they started turning into the dock.

Still working in 2022.
However, the fix in in the video no longer works. Move it will no longer grab the ship points. However, while fiddling with the road once I move it up a bit and farther back passenger ships started spawning immediately. I just compensated for the boats docking far off by using the prop dock to extend outward.

So it seems road placement is very important to these docks. It's not a drop and play asset, it takes some time and patience to tweek it. .

Too bad. It seem this mod is not functioning. I attempted to place a cargo dock. The connection line looked good, then I plopped and there was nothing visible. No shops come to the dock and no trucks deliver.

I'm having an issue specifically with the passenger dock. It continuously spawns ships on my outside connection that go nowhere but crash into land. It also spawns ships at the dock that bumble around and then disappear - one after another.

When I turn off the dock, this all stops.

We may also need a version for ferries.

Oh my dear skyline lord, this is the harbor asset of my dreams !! i hop it work ! thank you, amazing work

Concrete line needs water and electricity. Great (electricity is explainable, but still funny)

Working perfect here, thanks!

I'm having the same problem as Overlord.

For some reason I have a problem with the cargo version. I placed it on shoreline and it was visible that I've connected to the ship path (I turned off anarchy). But no ship spawned neither one ship arrived but trucks exporting goods used this cargo ship dock. I left it for about an hour and it was the same no ship arrived no ship spawned but trucks used it for export they've unloaded the goods there and they drove back to their origin. Anyone got an idea why?

It seems that with the changes to Move It's selection system, we can not select invisible nodes so we can't move the ship paths.

These are awesome! Is there a version of the cargo dock with rail track? (I always hated how the vanilla rail track is on the sea-edge of the dock and requires a rail bridge to get it to land).

@Strictoaster
Love your work! However Passenger ships are spawning right on top of the dock when leaving the city, even if you move the nodes further away from the asset. Is there a solution for that? Thanks in advance.

@Strictoaster

I discovered the problem on this... the ship path itself looked fine, but the ships for some reason were trying to take a shortcut and getting hung up on a strip of land ....

@lotherius yeah, it works fine. Not sure if this is your case but if you are editing the ship paths in-game it sometimes breaks.

I added this and had a valid port connection, but no ships docked. Is this still a working asset?

@Karose I don't think I'll update this asset again. Sorry.

good night @Strictoaster.
that building is very useful for build a port. so we can build port with custom building and prop in there.

so. how if the train port like that? I think that is a great.
I wait it.

@Strictoaster Thanks so much!

@longbaugh01 Extended InfoPanel.

@Strictcoaster I'd desperately would like to know what UI/Skin mod for the bottom toolbars you're using that appears in some of these screenshots. I've spent some time searching around the workshop for anything like it and cannot find it anywhere. Thanks in advance!

I'm having an issue where trucks coming to and from the dock 'dive' down under/through the road to reach the dock. I have a set up much like the dock from the Seenu playthrough. Anyone else noticed this?

How do I stop the docks from deforming the terrain? If I use Move It and they go a certain distance below the ground they drag little holes down with them.

Thank you for this :)

@Strictoaster Thanks, learned something new today, as well. Made a great container harbor with 3 docks, train and god knows what. Love this asset. :)

@Angelhearth click on "Strictoaster's Workshop" link at the top.

Where are the rocks you use with the waterbreakers?

Hey man, these are great!. Thank you. Would you mind doing a ferry stop version of this. The one the game comes with is just awful. I know with props you could do quite a bit to make a shelter and what not if we had a blank one. Just a suggestion. Thanks again tho for these!.

Really nice asset, thanks Strict!
However I think I've noticed a small problem:
When it rains Cargo Dock texture change to a "wet" version but Regular Dock stays "dry" and I don't know yet how Passenger Dock reacts. (It's a small issue and maybe it's just me?)
I know Seenu is always sunny, but I wanted to let you know this texture prblm might happen ;)

Can you add a ferry stop version of this?

Much Thanks!

Mkay, thanks. I actually found another video of yours showing when you built the docks, even if it's not live, so that's a few less questionmarks straightened.

But nevermind all that cuz my game crashed critically, lol. It's a real shame, your videos was what got me in the urge of revisiting this game, unfortunately without a liquid nitrogen cooled quantum computer I can't seem to handle all the mods I want/need. Anyways, love the Seenu vids. I'll have to live vicariously through watching you build I guess.

@handsomgrape it's actually not too hard if you have the right tools. It's true that the terraforming controls are not very precise, but the way I go around this limitation is by "hiding the imperfections" of the terrain.

In the case of Seenu I simply placed Ronxy's breakwater concrete slabs to hide the edges of the terrain and then put down this DIY pack hidden under those using the MoveIt mod.

In the video featured above I show a little bit how this process works.
Good luck!

How are you supposed to build something like the docks in Seenu? From what I can tell, you start with a landmass. But the terraforming tools are all terrible and it's damn near impossible to get the docks aligned. Is it better to shape out a square and start with roads at the edges? If you use move it, is it better to use snap to grid? I tried it and it didn't work at all. Might I proposition you to make a tutorial on the subject?

just what i was looking for all this while....yehooo! Thanks brp

thats great really looking forward to it
thanks for all you r effort that you have invested into this project.

@CrazyGraham aiming for this weekend.

Hi Strictoaster when do you thu=in the breakwater rocks will be avaible on stean ?

Like watching your vids and love your attention to detail. I have a request for you or someone else that might have some time to make this. We have all these shipping assets, yet we do not have:

Goliath Gantry Crane.

http://bloximages.newyork1.vip.townnews.com/pilotonline.com/content/tncms/assets/v3/editorial/2/4c/24ca33ad-5a8a-560d-bfce-2d8e4509cd37/563d603117e35.image.jpg

http://digital.dailypress.com/cvn77/images/ng_SS-27-graphic-10-06-06-F.jpg

@Galaxy that's a good one! Unfortunately my time is limited and I need to prioritize assets for my ongoing series which lacks rail. I'll ask around, maybe someone else can make it.

Hey Strict, I am a big fan of the ablility to customize that these docks allow. do you think you can do this for DIY railroads as well? Thanks Strict and keep up the good work

This is great and clear instructions. Thanks!

@Insufferableprick the "Passenger Dock" is a "Ferry dock" :)

Hey Strict, when ferries become a thing do you think it would be possible to get a DIY ferry dock? I've been playing with these and love the customization that they allow. Thanks for the awesome assets.

@gun155 I might add it in the future, but it's way down in my list of priorities right now. Sorry about that.