With some help from BroBeans the interact system "works". There's still some stuff to go through though, but depending on when he helps, and if I can upload it on Sunday. The helicopters (So far the XX-92s are configured, just the normal ones and some of the MH-92s and once I figure everything out, the XX-60s). If I can upload it on Sunday (will be limited to just turning the engine on/off) then I'll push it. If not, then the 28th I should have it ready. Bear in mind that the Hatchet Interact System will be required for the EricJ Helicopter Pack, and that only (aliong with CBA).

Exactly.

Yeah I mean usually I'll honor requests you know? But realistically I wasn't in the mood, nor wanted to do what he wented. He kept pestering me after I reasonably explained to him that I wouldn't do it, and that well set me off, so I blocked him. I mean I can understand a player really wanting to get that done, but NO means NO. Simple as that.

Ohhh okay okay yeah, got worried about that. Good that you blocked that dude tho

Oh I think I know what you're talking about, I blocked some dude who couldn't take no for an answer, so it looks a bit disjointed below

No... not that I know of, what's wrong?

Did something happen to the comments section?

Right now not much is planned, other than the integration of the Hatchet Framework. It doesn't require ACE3 or anything, to keep in line with me not wanting to support that mod fully. A lot of people have views on that, and frankly I like to keep the mod requirements to a dull minimum, just what's needed for the mod to function. Right now I'm planning on just doing the Engine ON/OFF switch, as I don't know or feel the need to incorporate a full suite (that would require a lot of model work for each helo, and I got a lot of them), but also looking to incorporate MFD functions, like the FLIR camera screeen, and the Sling Load screen. I don't have a timeline as I am putting it off honestly, but will get done in the future, just have to get around to it, along with other responsibilities in life.

Also I do a lot of work through the Discord I maintain as I only reply to comments more or less, and don't like posting updates on here, due to the limit in characters. Scroll up and you can find my Discord and I'd like for you to show up and maybe interact and stuff.

Did some research on the HH-60Hs and found out that the aircraft can sling load, so the capability will be introduced this Sunday, given that it can lift 2,722 kilograms. Not much but it can lift some things for milsim needs.

With the new update for the EricJ Helicopter Pack, I'm planning on releasing a "Pilot HH-60H" Multiplayer mission Sunday. I can make the mission today more than likely but can't release it until Sunday due to the nature of the way Steam updates, and so on. Either way I can make the mission to coincide with the update. It should be noted that I tend to focus on MP missions. If you're looking for SP missions let me know and I'll see what I can do.

I just had to block somebody for pestering me too much to do so something. If I tell you that I don't want to do it, I don't need you to try and pester me, thinking that will somehow motivate me to do it. If it gets too much I'll just block you and you can go your merry way or do it yourself. I am under no obligation to acquiesce a particular request, especially if I give a reasonable answer why I won't do it.

Just so everybody knows, I have no plans on doing heavy-lift helos. You can find Kit040199 on Discord and talk to him as he's sometime going to do a Quad Rotor Chinook. I don't know when, but he's got the materials, so talk to him about it, if you're hankering for one. As for me I'm doing some maintenance stuff and not looking to add anything in the short term.

Look man, I'll do it when I'm good and ready to do it. I'm under no obligation to do anything for the community. So when it pops up, it'll pop up, but for now I'm not in the works to do most anything with the mod.

Also just a general tip when checking for a bug. Unload all your mods and just have the mod and CBA_A3 running to clean things up. Some mods do things and may present an unrelated bug or error that is beyond my control with other people's mods. I don't use a lot of mods myself, but the less chance of an error due to somebody else's work when reporting an issue please.

Also looked at the issue with the pilot/co-pilot thing with the laser not working. I think it's Arma maybe? I have it priority for the co-pilot, and so should be the one gunning anyway, not the pilot.

I think the USAF stuff is on your end, I tested it with no mods other than CBA_A3 and couldn't get that error. As for the AH-96 I'll look into that too, missed that when replying

Okay don't know the Hellfires caused that issue, I don't use any USAF Mod code, so that's a new one, but will look at the config though... I've noticed that effect with the Hellfires and that's a warhead thing, as it uses submunitions to attack the target, and that's probably BS's way of modeling that. The Pilot shoudn't really be using the Hellfires, but I can see if I can't change it to the Co-pilot by default and that might clear things up. Not sure about the designater, that may be game behavior. But I'll look into the missile code and the Co-Pilot stuff though.

Okay... list of things I've noticed as of late:
1) AGM-114K Hellfires have a warning popup for a missing entry in "bin\config.bin.USAF_missile1" upon firing for the first time, afterwards they and the vanilla SCALPELs have a habit of phasing through terrain without exploding; they're still capable of killing vehicles though
2) HH-60H laser designator doesn't seem to be working properly or it isn't detecting its own laser; this only seems to happen if the laser-guided missiles are under the pilot's control though, they track just fine under the control of the co-pilot
3) AH-96D Coyote rotor blur is off center from the rotors themselves, one of the blades have been centered on the rotor hub, it makes for an odd sight
4) Target designation under AI control seems a bit off, they sometimes aim too far past the targeted entity though this could just be a case of the helicopter being too close to the target for the gunner to designate properly

Haha we;ll see man :)

Somebody was attempting to do that, so I didn't bother. I'd do it but it'll be some other future project though, as I don't know how to animate four rotors and such.

Hey man, can you make the ch-47 Chinook helicopter like you did with the UH-92 version.Pretty please.

Agreed, unless it's breaking, it'll be this Sunday

Hopefully

Fixed and should be the last update for the day lol

Yeesh okay

Nice

Also, remember the wheel issue I found with the HH-60H (Minigun)? Well it looks like it's also affecting the Insertion variant

Thanks again Spartan 208, it was a bad config that was causing the problem, should work as intended now.

Yeah I was able to reproduce the problem, but I'll need some time to figure out why it's doing that.

Okay for the crew I don't know how that's happening as the slot isn't locked out or anything and it works as intended during an Arsenal check. I'll play with the editor and see if I can reproduce what you did. And fixed the wheels.

Damn, okay I'll look into it.

Just took a look at the new HH-60H variant, came across an issue when trying to place custom crew in the Eden editor the copilot's seat is locked out (can't put a unit there), and when taking off the two front wheels detach from their mountings for some reason, they seem to fix themselves once the helicopter is back on the ground though

Okay thanks man

Neat

Also, you may want to check the seats on the HH-60H (Insertion), last I checked the passenger's backs clip through the helicopter's left side when seated on the seats lining that side of the cabin

Also added a KNOWN ISSUES above, for things that apparently don't want to work either for this mod.

https://www.youtube.com/watch?v=CjkCy6ThquA

Yeah I took care of the ones that you mentioned, so it should be good, thanks for checking man.

Update regarding the rotors: from running all the H-60 helicopters at once, none of the others have the issue I've seen with the HH-60H, it may be model specific

Okay I'll look into them then

The HH-60H and MH-60S thus far, I'm not sure if the SOAR MH-60's and the base UH-60's are affected though

Okay cool, which ones?

Sweet!

On another note: I've noticed that some of the H-60's have an oddity with their main rotors, namely that the blade model for when they're stationary isn't being hidden once the rotor reaches optimum flight rpm

https://www.youtube.com/watch?v=UL2X_v-k5Rk

I get that sometimes too, I don't know what to do to fix it, given that the model.cfg looks good. It's either some issue with a mod, or a general issue I need to look at.

btw, been getting a popup that says that there's a conflict in the skeleton for the M197 gunpod used by the gunship version of the MH-60S with the GX - Skyshield mod. Says its in the bone count

I think it's okay, but worth a look though.

Hey has anyone noticed anything about the rotor motion blur on the MH-92's and AH-96's? They seem to be off center for me

Current progress of the HH-60H: https://www.youtube.com/watch?v=n8V_PB4Vn8M

No news, the guy who was doing it hasn't reached out to me, so no word as of yet. I don't think he'll be able to do it in a good amount of time. I do have an option that I might pursue though, but I have a Discord where I post most of my updates though, if you're on that program.

G'day EricJ,
Yes, I'm still alive and kicking. Thanks for the reply. I appreciate the work you're doing with this pack. Do you have any update on the Avatar choppers model?