Works perfectly with some blocks (27 normal blocks or a large grid large thruster) requiring their respective components and welding it, but when it comes to a big ship or just a singular miner ship, it becomes crazy.

Hey uhmm, i managed to build a great part from a miner (4 drills, 8 batteries, all normal blocks) using only steel plates, and it consumed like 7000 of them...
It didn't only transmutated the steel plates but it disappeared them too.

I have around 215 mods in my world. I'll try again on a new world with minimal mods.

A beautiful wall, it glows, but it doesn't work – it neither cuts nor welds.

Are there any mods that could be conflicting, or might the issue be related to a game update?

Hello, I think the mod is very good and actively use it on my servers.
It is an excellent alternative to conventional welders/grinders.
However, I would like to see a few things expanded, e.g. redesigning the buttons so that they can be controlled via buttons and timers. The reason for this is that I would like to build a shipyard and then integrate it into the automation system.
Thank you very much.

this doesnt work. ive built it properly, within the size limits, ive got more than enough power, everythig is enabled. disabling and reenabling the corners makes the green welding area appear for like half a second but then dissapears

Hey, any chance you might make this repair dents and deformations on armor blocks, too? Would be really helpful!

Thanks for the response!
I've used the half block and its just a touch too low. I've tried bracing it multiple ways too.
And hopefully not to sound too needy, think there might be a way to have them switch between grind and weld with an event block? I tried and it was no option for that.

It would be possible, however you can just add half blocks on the bottom of the floor, there is no line of sight check. I dont remember if that'll cause it to grind the half blocks though-

I had a question. A buddy and I are loving this mod so thanks for it!

We were wondering if it would be possible to add a displacement for the welder line. It would be similar to how the rotor heads can be slightly adjusted. That way we can make the welder line and the bottom of pit to weld up small grid stuff. Think it could be done?

would be great if idk there was a tutorial

built it properly but and see the welder wall

So if i read this right this welds and grinds depending on settings? Only other question i can think of is this locked to space or can i pop this on a planet aswell?

hey been having issues built a large frame 62w 58w and its been wonky not starting randomly grinding the ass end off my ship etc i have 3 reactors and like 40 batteries just wont work now

When i tried to make a ship from projection it seemed to take all my recourses and only weld a part of the ship even though i used projection to assembler to make the missing parts but it made me make the missing parts 3 times and it still wasnt done completely

The closer you get to MaxPower the the faster it will weld/grind to the MaxSpeed config value, the scale of power to speed is roughly linear (then half max speed when half max power). ActionsPerTick is a performance option, lower it if you lag too much when welding or grinding.

Super cool mod that makes it way easier to repair my large battleships after taking them to Unidentified Signals!
I was wondering if you could explain what the different settings in the config do. There is an actions per tick field, a speed field and a max power field. How exactly do actions per tick and speed interact, and how does power factor into it? I can shove tons of power into the walls but what does that actually do besides drain all my batteries? :)

I was also having the same issue as Cold_Far and Imp.
Setting the Power Input on the welder corners to 100MW has resolved it for me

Have the same problem as cold_far. It doesnt weld ...

As far as we were able to notice it does not fix dents but repairs the block. so the dent is there visually but does not get buffed out.

found a bug? The wall welds like 1% and puts in all the components, but doesn't weld to a completion

The default max limit in the config file is 50, you can see the max size ingame using the blue lines

Is there a size limit for system to work? I divided my non-functioning welding wall to 2 rectangles and both new rectangles work now.

Same here, everything is connected but it doesn't work

dont get it to work, is there a script or something else you need? i see in the last picture of this mod in the control panel on the bottom right under refine speed, yeald rate and power efficiency you have "inventory in, inventory mass" and all that, i dont get it. ive built a square, put a large reactor directly in one of the corners and filled it with uranium. still nothing happens. and im in creative btw

Hello, amazing mod. I have been using it for the last 5 days or so and it is great. I just figured out where to find the config (thank you Stollie). Is there a setting to repair dented blocks I have not seen? No matter keep it going and thank you very much.

I was thinking that if the welder wall is forced to be an static grid, it cannot be used as weapon on a ship, because it only could exist as a static voxel tied grid... actually not tested if i can build this wall on a ship or a movable grid truly...

I not tried safe zone, now you say that i could try that... may be even worse if it eats safe zone.. i mean the shileds from mod https://gtm.steamproxy.vip/workshop/filedetails/?id=3154379105
that shield makes damage to whatever it hits if it can not repel it. I passed with a smal ship with shield that fit entirely inside a big wall and the shield not intereact anyway with the "red" frontier of the wall, and as soon as the ship got to the red it was dismantled as it should be in normal means.

By shield do you mean a safezone, or some mod?

Hi, is there a way to make it not work when you put throught it a ship with shields active? I'm using this in my server, today i tested for stability and how bad can be putting high power and high amounts of debris trought it, it works great, but i tested a ship with shield and it was grinded like any other. I put a warning to not use as weapon or could have ban player or get wiped but if there is a way to make it not work to shielded structures should be more easy to control.

Hmm pretty sure this thing is eating components.

I can build a ship to 100% then grind it down using the wall, then suddenly I'm short on components on a re-build of the same ship I just grinded down.

You also have to up the power draw, I found 100MW (100000000 units), which is 1/3 the power of a Large Reactors output, worked well if you want to see instant results, otherwise its many passes back and forth.

I put mine really high for testing purposes which results in instant grind/print for every block in a slice. This WILL cause your game to lag when you weld multiple blocks that have a lot of code functionality tied into them at the same time: -

# EasyConfiguration; auto-generated config file
# Surround text in "Quotes"
Speed = 10.0
MaxPower = 1E+09
MaxWallSize = 50
MaxActionsPerTick = 5000

Cool mod!

For those that cant get it working its because the default settings have been set really low to maintain performance from say a sever using them.

If you go into your local save game files in single player there is a config file in the Storage folder called "3370792625.sbm_Math0424"

Up those settings to what you're comfortable with if you want faster print / weld OR if you want to maintain performance you will simply have to use an event controller or something to make a piston go back and forth to allow for multiple passes until the weld or grind is done.

Its pretty slow for either function with the default settings.

cant gt this to work, will not weld or grind

I asked over and over in the begining of SE for the devs to bring something like this to the game. but i phrased it badly. a "3d printer". over and over. and then they for some reason made it so you could port your creations and 3d print them in real life. i really hope i was not to blame for that

if only microsoft did not update my computer and delete my save where i was build a vaygr flagship. this could have been a game changer

@Lancer-2201 Almost posted the same thing

THIS IS EXACTLY WHAT I WANTED
Tbh for my private server I use Build Repair Nanobots mod for building but its a lil OP, and this mod looks like a great balanced way for ship production

@Lancer-2201 Was just thinking that ffs

@Dots No, it's a welding wall. its a wall that welds. A welding wall that welds. How does it work? Well, so first there's a wall. And then it welds. Why? Because it's a welding wall that welds whatever needs welding.

Mayyybeeee
You're gonna be the one who saaveesss meeeee
And after aaaallllllllll
It's the welderwaaallllll

Looks real nice and will be a great improvement to my ugly old walls!

*tunes an acoustic guitar for too long*, okay, anyways here's WelderWall.

Oh so its like build and repair system but without the flying arrows all the time?

Imagine needing a video to understand something that is self-explanatory lmao.

Im not sure how else to tell you this, but it's a wall that will weld or grind grids

can someone please make a video and showcase this mod so we can better understand what we are getting?

looks nice, but how does it work? I cant find the walls of welders and grinders on steam workshop