October 3rd 2025, original and this version of pipelines work.
Small oversight, two pipelines on the same grid won’t transfer items if they connect through an unpowered grid. That grid must be powered, and a conveyor sorter set to ‘Drain All’ is needed between them.

I cant get the pipeline to see the rest of the conveyor network on my base. I've checked and rechecked all connections and they all work, right up to the pipe hubs themselves. I can see other pipe hubs on the pipe network, but not any network past the pipes themselves. Any help would be nice.

Hey Crowigor, is this like a ''fixed'' version of the old one?

Hey Crowigor,

Thanks for the reply. I used the original the other day and did notice it was buggy. I had to re-install the mod due to the Signals update. I've not try it since.

It seems like every update that rolls out, it messes with the mods. The Signals update was the worst. Had to re-install over half of the 240 mods I have, granted I don't use them all, so you get the idea. Lol

Anyways, I'll sub and check it out.

Later.

So, if the original works for you, you can stick with it. I made this modification mostly for myself.

There are no conflicts. You just replace one mod with another. Here, they have the same `subtypeId`.
The original mod isn't broken, they just forgot to add mount points at the front and back in the sbc (although it has working conveyor ports). I also added one on top.

I also recently came across a modification that allows pipes with the same prefix to connect (to prevent entanglement), and I've incorporated that as well.

Unfortunately, I couldn't get in touch with the original owner. I managed to contact one of the authors, but I specifically need the owner. So, I went ahead and released the fix.

Hey Crowigor,

Didn't know the original was busted. Any conflict issues between this and the original mod or is this a total new version of that mod?

Thanks.