@homerleftmoes - changing the mods subscribed or enabled requires a restart. Additionally, you could be missing Harmony 2. Otherwise, I would suggest to run Skyve (linked in the mod description) and it's sort-of-technically required to set load order with mods like TM:PE.

I had this installed, and the mods changed in the display from 8 down to 4. when I checked mods installed in the game this mod was not on my list under content manager. I then went to the web site, and it showed I was subscribed so I unsubscribed. However, it still shows up in the game and still does not show under content manager in the game. Any suggestions on how to solve this?

Thanks

@codeswitch - thank you for the response!

Whenever you cant access a mod/tool... look in the mod's options to find out what the keyboard shortcut is to bring it up or use it... Typically that will work

I'm having network/ intersection marking multi-tool, node controller, and some others do not show up in this version of UUI. The old one works fine, however. Thanks for making the mod though!

@codewitch I just needed a little patience. Started working a day or two after I posted.

@LadyKona - you can use grabber to grab those mods buttons if they don't have a button this mod doesn't include any way currently to include them. To remove the park option as grabber is experimental and will not always work you might be able to unclick it in UUI but if you cannot I recommend resetting your settings to restore the default position.

@SimplyFemske check network multitool settings. It has options for including it in UUI, only the network multi-tool bar, or both.

@dark lord - cool, why is that my problem?
2) Skyve is required to setup load order. Once it's been setup, it might work without it

Until Patch Loader Mod is fixed I can't use Skyve therefor I can't use this mod.

I can't access network multitool...

I accidently clicked on my districts and parks. They left there place in the tool bar and arrived in the UNified bar instead. This results in the buttons in the bottom NOT retaining their job, but taking on the job of the item that was formerly to its left. I managed gto get the buttons out of the UI bar, but they headed to the right side of the tool bar at the bottom of the screen. Now I can't seem to get them to move to their default place! HAve been looking for a guide, reading posts, and have read this page more than three times. I can't figure out what I've done! I'd like to have 1) my origina tool tray back in its original orger. 2) It would be nice if the mods I've loaded actually used the UI. Cause I cant find anything that doesn't have an onscreen button.

HAAALLLLP!!!
Happy to read a user guide if someone wants to link instead of type.

@Azefroste - use the most recent version of Skyve. The mod doesn't reference anything in Skyve; rather Skyve is needed to configure load order
@Henrique B. - by default, Network Multitool will be configured in NMT settings to only use it's internal menu of tools; you can change this to be Unified UI or both instead.

Uses the wrong version of skyve

Any new on Network Multitool won't show up under Unified UI?

It doesn't seem like it was updated recently, it's odd because the same thing happened to someone else I know, it just fixed itself

@Svis it's possible IMT was updated. I saw some IMT templates broke, perhaps there was a slight issue?

It literally fixed itself

I had the same problem where Macsergey's mods wouldn't load in UUI, I will try again and with the old one to see if it's IMT's fault or this mod's

@sllllllp
I still using
[WILL BE DEPRECATED] UnifiedUI (UUI) 2.2

It works fine and with all features for me.
All other (newer) versions d on´t work 100%, but the old one still works.

@Framperia, @sllllllp
I haven't been in C:S in a while, but if it's still the case when CO dev C:S stopped, then this and IMT should be stable:
There is an option in IMT to use it's internal menu, UUI, or both. Can you confirm which the toggle is set to in IMT?

@slllllp IMT is non-functional at the moment - unsubscribe if possible it can be game breaking.

Not too sure if anyone else has had this issue but Intersection Marking Tool isn't showing up in UUI. Anyone know why or how to fix?

@codewitch I don't remember what I did or what happened but I think it's fixed something is anyways

@Fox122 You're going to need to be a bit more specific than that. Perhaps an error log, or screenshot..?

apon using this, I had it before but got this and added more mods into it, but now its giving an error something about no set properties or something

amazing job!

@FlyingThunder
"how does the button grabbing work again? i cant find the mod in the settings"
1. Check if it is enabled properly in content manager.
2. It's a Pin-looking tool in the UUI menu. If you don't see it, try resetting it's position.

@Robin_vg uh...I...Okay, that's a new one. I will check if it's happening for anyone else.

@PhazezGova Heh. BETA like Gmail Betas. B)

"how does the button grabbing work again? i cant find the mod in the settings"
1. Check if it is enabled properly in content manager.
2. It's a Pin-looking tool in the UUI menu. If you don't see it, try resetting it's position.

how does the button grabbing work again? i cant find the mod in the settings

when i click it i only see one thing UUI and it looks like a tunnel. I dont have other symbols in it, i cant find a sollution. I got many mods who are compatible whit it. have this for while now, alsow whit the old version

When will the BETA be completed, can you estimate that?

@Captain Corona - I appreciate the sentiment but I am aware there are...issues. This is not my mod, I just volunteered to help update it after the original author disappeared. There are some...issues that are not easily solved - or required coordination with the wider community (e.g., the "macsergey suite" - Network Multitool, Node Controller, TM:PE, Roundabout builder, IMT) and I'm not always sure how or why they work or don't. I suspect things that *I don't have time to look into* like a mistmatched linked library that seems to have been copy-and-pasted instead of referenced that the original author may have had an older version of, but I would have the current version of, for example, may be part of the issue.

@Cwebb , @elaledou - are either of you on epic?

@Cwebb Perhaps you should create the mod yourself instead of fucking whining and complaining about other people's work that do it for free?

I absolutely love this mod! Works perfectly!

Why do people upload mods onto these websites that dont fucking work...

This just does not work at all!

Network Multitool, Node Controller or really anything works properly with this mod!

Hi, I was also having issues with this mod, kind of is downloaded in the game being unusefull but even impossible of unsuscribing because is shown as I appear as not suscribed to any of UUI mod available pages.

I could not even found the mentionned below file 'UUIGrabberData.XML' in any directory. I have Harmony fonctional but Skyve cannot see UUI.

But I coud fixed it by deleting the file "UnifiedUI.cgs" from the root of "C:\Users\'YouAsUser'\AppData\Local\Colossal Order\Cities_Skylines".

Hope could help some of you with same issue. Regards! :-D

PS to the modder @codewitch: I appreciate your work even if it didn´t work (and even it does not yet) for me. Regards!

@Juju, do you have Harmony?

hi,

UUUI doesn't show up in my content manager
nor pretty much anywhere except in the game. I don't know how to use the grabber tool as I cant find it anywhere. feeling quite stuck please help

@Omnon: Yes it does. quote: Gathers the activation buttons for other mods in a unified place. Provides an "Activation bar" (like a dock) for the registered and enabled buttons. Can optionally grab buttons in other UI elements (even if not integrated with UUI) and help detect hotkey conflicts in supported mods."

What does this mod do? This page doesn't say and the wiki link doesn't work

also, i feel that there is ambiguity with the "install" folder. is it the folder that opens up when you browse local files with steam? or is it stored somewhere else completely different?

i'm having the trouble with not having enough icons inside of my unified UI, but i'm trying to find the xml file and i cannot find it at all. i searched through my entire install and steam folder, but nothing.

@Snewo-NL, @noah am - this shouldn't be the case and you can try deleting the 'UUIGrabberData.XML' file in the install directory of Cities Skylines (not the data directory or your appdata directory). The issue appears from sharing the same data file as the original mod. You need to do this before launching the game, or restart after doing it.

If you use Roundabout builder, it doesn't always play nice with some newly updated mods in terms of positioning when grabbed. I keep it ungrabbed and activate it via shortcut. It gets grabbed but it like, doesn't position in the row correctly almost like it's using older styles from table alignment days and everything else is fine. If you encounter THIS issue, the easiest thing to do is simply use the in-game reset option. This shouldn't need a restart, but any grabs or options will be lost. The "column" setting for example, will also be lost, and I've noticed that sometimes it doesn't apply right away (in both versions).

@asterisk11231 okay, thanks for the heads up. So how do we fix it? Should we delete something in the file dir? Is there gonna be an update?

For some odd reason this mod only functions properly with Prefab Hook installed. Without it I have nearly no buttons in UUI, but with it most appear. Should it be listed as a dependency on this?

@keevitaja, @Snewo-NL, @Tjoori - I haven't needed Prefab Hook (Mod Dependency). I do not have it subscribed.

Currently, the issue seems to be if you have a grabberdataXML settings file from Unified UI (original) and this mod (i.e., from upgrading or switching profiles); I can get either grabber to break in either direction.

@Tjoori, If you are missing Macsergei's mod's - NMT, NC, IMT: those are controlled by workshop ID. Are you using epic games? This was decided "before my time" and likely won't change before CS:2. Something else is going on here if you are missing these specifically; integration "checks in" from those mods (live partially in those mods) and then enables itself. Also with TM:PE and other kian originally worked on.