vehicle deprecated utilize this instead as it is more accurate:
https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=3004447959

@Panzerzwerg i'll update the jamming equipment to stop interfering with SARH freq but it does not affect anything that doesn't use that frequency, hence IR missiles are not disrupted 'normally'

Alright, gonna give it another go. Does having SARH guidance on disrupt the IR missiles btw?

@Panzerzwerg sorry for the typo yesterday, fixed the issue with frequency not being stored, IR missiles have limited FOV maybe that's why the R-40T didn't track

@Pnzerzwerg sorry but i don't know anymore, i'll take a loot after i wake up (i didn't sleep) if i manage to fix that i'll make a video tutorial

I tried with the updated versions, again vs a stationary target at 1500m altitude. I entered radio and guidance frequencies, and equipped both R-40R and T. Radio transmission, SARH guidance etc all enabled. Acquired the target on radar and visually, locked on and neither missile even began to track the target, just flying past it.

@Panzerzwerg the weapons and vehicle were updated, i did some testing as well and they should work well enough against the regular A2A targets now with the improved radar on the jet

@Panzerzwerg i finished some combat tests and i'll see if i can improve them, the radar though i can't improve much upon since it's range is limited to what chunks are loaded (2.5km normally and 5km on multiplayer), i'll finish as fast as i can))

I also tried using other missiles from the pack on other planes, none of the big ones (R-40, R-23) work, I guess they only work with some proprietary radar config?

tried hitting a stationary target at 1500m with the R40R, it is extremely difficult to get the right target locked at the range in which the radar actually detects targets; in time because the plane is so fast. Even the IR missiles more often than not just miss entirely.

@Panzerzwerg CCIP has no effect on anything it's just a drawn impact point, M1 is for gunpods (not included), M2 is for rocket pods (not included) and M3 is for unguided bombs

For A2A get a Radar Lock™ and enable SARH targeting for R-40RD1 or R-23R, make sure the right target is locked, Spool-Up and then launch your missiles, the R-73M for example will launch and immediately start tracking the target after separation

Alright, i got the missiles to finally launch! Now the problem is target acquisition and tracking. Does CCIP mode affect A2A? What are the different CCIP modes? The HUD is tiny and whatever the radar sees, especially if it's a moving target just appears as a tiny blip on the HUD making it very difficult to use.

@Panzerzwerg make sure you didn't flip the switch that toggles between release and launch and it should work otherwise i don't know what is going on

@Narni I did all of that and got it to do at least something: When I now press space, it just drops the missiles off the hardpoint, not launching them.

select the grid selection tool, click load vehicle, load the missile file them, put them under the hardpoints and then use them

how the ever living hell am i suppost to attach those. when i try to put 2 diffrent things into the editor one of them dissapears.

@Engineer Gaming the weapon collection is quite literally in the second paragraph after the title of the description

it doesnt have any missiles bruh i was so hyped with the missiles but now.. now im just mad.

@Panzerzwerg yes just like that sorry for reply being late, just arm the hardpoints with the panel on the right side, select the hardpoint and series (1 first from left 2 first from right 5 bottom) ripple, release or subpylon then spool up the guidance with the button on the bottom left of the front panel and launch (with SARH targeting radar and lock if using R-40RD1 or R-23R) that should be it for all types of hardpoint and missiles (including KH-58 just set frequency that's transmitting for it) hope it helps))

So all I need to do is slot in the missiles to the hardpoints and that's it? Nothing else? No logic or electric stuff? So how do I launch a missile then?

not needed just turn on hardpoint subfunction to enable guidance (i could not get spooling up to work like warthunder sorry) and select the guidance frequency to delay jamming

I'm new to the Stormworks building system, I managed to attach missiles to the hardpoints, but how do I connect them to the plane's systems?

@Comrade Stalin thank you comrade i hope i manage to improve vehicle further soon))

@Antonov-225 Спасибо за твой комментарий)) sorry not good russian still from me!!

Hey guys be sure to rate it if you like it to make it look more tasty 😋

@Beefsupreme30 comrade maybe one day i might make MiG-31BM with the R-33 missile but unsure of how to do cockpit controls so i'll focus on this with little time i have

YO, Огромное спасибо thank you my guys, we shall make these skys unflyable

Can you make the two seat variant? I believe it had one.

POV: The Germans Donka, Comrade. Deutchland

i like my new planes

thanks comrade it means a lot to me

nice