@shino

Sooner or later. But I’m not actively working on it yet.

Will this be fixed?

hope you keep fixing, this is an amazing asset to tts

@ЛюбительЧая

Приветствую. На данный момент работа над модом практически не двигается поскольку моя собственная работа отнимает много сил и времени.

Не знаю как именно вы можете поспособствовать. Ибо фигурки делаются на абсолютно альтруистических началах и пока свободного времени у меня не появится я физически не смогу ничего поделать :)

Могу только ориентировочно дать предсказание, что может выйти обновление мода в середине весны, по причине более разгруженного времени. Но гарантировать ничего к сожалению не могу.

Добрый день! Хотел бы поинтерисоваться как продвигается восстановление моделей, и как можно этому поспособствовать?

I might be out of my element here, but if anybody has the files from before everything broke, couldn't they just use the "Upload All Local Files" button in the Cloud Manager to create a personal mirror, and then upload that set to the workshop as a temporary fix? It says in the description of the feature "Great for [...] backing up mods with dead links to the steam cloud."
@Zhangjao, if you have the mod cached (You can still see all the models), then you yourself could load up the sets, use that feature, and then all the old resources would be mirrored from your Steam Cloud, so all your friends (and the entire workshop) could use them until @Zumez fixes them properly.
I too would love to get access to all the models, but I got the pack too late in the game, or I'd try doing this myself..

@ZhangJao

Not sure. You can try transferring save files. But there is no guarantee that this will help.

Since I can currently view most of the miniatures normally in the current state of the mod table when I open, is there a easy way for me to send my files for my other players to also see the miniatures?

@ZhangJao

Hello. Some minifigures have been fixed. The global repair continues.

Hello I saw that the mod got a update on October 25th which miniatures were fixed?

@ZhangJao
The reason for this behavior of the thumbnails is the lost source code. To make the figures work again I need to make them again. Every mod update, I indicate what has been repaired. You can follow this indicator when the figures are ready.

It's ok, just to be understand what is happening to the miniatures? Because I can see them normally on the mod when I enter and also I saved some on a chest, but when I put them on the table for my players all they see is a white cube.

@ZhangJao
Well, Mawsworn is also undead. But it will take much longer to restore them.

Actually the miniatures are the Mawsworn, I mistook them with the undead

@ZhangJao
I understand. And I really want to finish fixing them as soon as possible. I'm almost done with the Forces of the Abyss fix. And most likely the undead will be next.

Please my friend fix the miniatures, most of the undead army is for my DnD final chapter on campaign, help me haha

@Gridness | 青峰
Понимаю. Но на данный момент совсем нет времени заниматься фиксом. Как оно появится выложу патч с полностью доделанным Пылающим Легионом и Силами Бездны

Лучший набор моделек из WoW, что есть в воркшопе. Жаль, что почти все не работают :( Очень хочется увидеть их пофикшенными

Hope to see it fixed and continued. Such a great package of models :)

@VoidInsanity
I know. At the moment I don't have time to continue fixing them. As soon as it appears, I will begin restoration. :)

Some Mini are still broken. Changing the Titan States also breaks them.

Just saw the update, thank you so much! :D

@Xaaridan
Well...regardless of readiness. I promise to release the next patch on the 22nd at the latest. Perhaps earlier, since I don’t have very many miniatures left to restore in the Burning Legion.

I'm always happy to help fellow Dungeon Masters. :)

That is incredibly kind of you. :D Our next session is planned for friday next week, so the 24th.

@Xaaridan
Hello. Right now I'm stuck with one figurine that is very difficult to restore. I am very glad that you are impressed with these models and would really like to provide them as soon as possible. I have the Coven of Shivarra ready, so tell me when your game will be and I will pump out an update a couple of days earlier with a new batch of ready-made figures

Hey, first off wanna say its an amazing mod, recently started using it for a very fiend heavy part of my D&D campaign. I understand that restoring these models is probably a pain in the ass but was wondering on the progress of it as I would love to use the Coven of Shivarra models that are currently broken in a fight next week. Thanks again for the mod :)

@SeduhaSapuha Из Reforged версии Warcraft скорее всего возможно достать модели. Однако их наладкой и обработкой я не занимаюсь. К тому же у меня нет знаний о том, как именно получить файлы из этой версии игры. Я занимаюсь исключительно миниатюрами по World of Warcraft.

Ну да, Антонидас только в вар3 был. А из рефорджа возможно модельки достать?
И Тиранду хотелось, которая еще до становления воином, когда она была жрицей, возможно на тигре.

@SeduhaSapuha Громмаша, Тириона, Лиадрин, Малфуриона и Тиранду вполне возможно добавить. У Верховного мага Антонидаса к сожалению нет собственной модельки в World of Warcraft. Если конечно он не был внезапно возрождён где-то в последних патчах ДФ :D

Касательно Ордена Кирин-Тора, пока что у меня есть возможность добавить только Кадгара и Модеру. К новой модели Калесгоса и остальным трём верховным магам Кирин-тора у меня пока доступа нет.

Я отмечу их себе. Так что как доберутся руки я займусь их воплощением в миниатюрах.

Ну меня интересует Антонидас, Громмаш, Тирион Фордринг, Леди Лиадрин, Малфурион, Тиранда

@SeduhaSapuha Такая возможность скорее всего присутствует. Напиши какие персонажи конкретно тебя интересуют и я добавлю их если это возможно.

P.S. Это точно произойдёт не в ближайшем патче, поскольку сейчас я занимаюсь восстановлением фигурок Пылающего Легиона

А возможно добавить орден Кирин-тор и орков с Дренора? Их лидеров. И ночных эльфов со своими лидерами-героями

@Sternomant Спасибо. Я сейчас активно работаю над восстановлением. Также скорее всего привнесу более высокое качество исполнения в самые первые модели. Жаль что восстановление 500 миниатюр не быстрое дело. Но в ближайшие дни можете ждать первого апдейта с списком всех восстановленных фигурок.

Всем нашим столом по ролёвке ждём восстановления, автору печенек :3

@SeduhaSapuha Да, к сожалению после некоторого происшествия модели перестали работать. На данный момент я работаю над восстановлением мода, но это займёт приличное количество времени.

Часть анимаций не загружается. Пишет ошибку. У друзей вся карта загрузилась с ошибками, все в белых кубиках.

Спасибо большое!

@lalaef Смогу. Её модель правда весьма старовата, по моему личному вкусу. Но я добавлю её в список)

А Лана'тель сможешь?

@1_BhS Yes. I'd love to see what these figurines will be used for.

can I use these in a video and shout you out?

@In Vino Veritas, Yes. :)

Now, with all this wealth, it would be cool to come up with a wargame like warhammer

@Wise Lich King, Zooval, Painsmith Raznal, Dormacain, N'Zoth, Il'gynoth, Mythrax, Aggramar, Imonar, Kin'Ganoth... I don't remember. Like someone else had a voice.

Who has voices?

@menon_ap
I'm glad you like these figurines. I try to improve/repair them. I'm sorry, but for the foreseeable future I won't be able to give any of the figurines English voice acting. But if the opportunity arises. I'll think about it.

this is awesome, i like these models, the russian language kinda gives the sensation the monster ones are talking in a language we dont understand (doesnt understand russian)
Will it be possible to see the english version in the future ?
thanks

@Joystick Wow. Thank you very much, I will definitely try everything you suggested. To improve my figurines.
I have been looking for ways to fix the animation problem for a very long time. And in a future update, I will definitely present the results of my attempts.
:)))))

For certain glitched animations, you can duplicate the animation file that is embedded in the FBX with CTRL+D. This allows you to edit/manipulate/delete rotation values and frames from the animation pane.

Then you'll need to figure out which bones on the model are twitching/glitching. To do that, apply the Copy of the broken animation to the model as normal, right click the asset in the hierarchy and click "Select Children" to expose all the bones.

Next, use the animation pane and scroll through the animation to find which frames are glitched, then cross reference the animation with the bone list to identify which bone has a broken rotation value. I usually leave the animation frozen on the frame where it's glitched, then scroll through the bones until the offending bone is highlighted.

Once you have identified which bone is broken, you can decide how to proceed. Usually I will delete the bone from the copied animation file (both rotation and position). This locks that bone in place while the animation plays. This is done in the animation pane.

This is really useful when you have a foot or hand or tail that glitches only during a few frames. I've also used this strategy to make custom animations, like a deleting the rotation value for the Jaw Bone on a dragon animation so that it can have it's mouth open for a breath attack during an animation that doesn't usually include that.

DISCLAIMER: Some of the animations that import from WMV to Unity are so broken that the above strategy just doesn't work. Better use a different animation altogether.

Lastly, I have found that some animations that are a little glitchy can be cleaned up by turning off Animation Compression and unchecking Resample Curves from the Inspector. Sometimes it works, sometimes it doesn't.