New anti chaff missiles added + failsafe when spawning multiple vehicles with frequency usage so they don't get fired unless you turn on the drone + new map replacing the old NJ map with iff map at 10km visual plus radar from 2222m to 3200m

Required objects

where is the station to control this

repaired what devs broke

aha..pfffffffff.

:)

Maneuvering
1.Gyro off
2.Any automated systems off
3.Go TopGun mode [Joking]

i searched topgun and this showed up. why?

you also may need to activate the control station on the tabc-79m, which i did not know

did u put the frequency's on drone and station exactly the same

It doesn't work, I tried putting in the correct frequencies, 1001, 1002, and 1003, and turned on the station, still doesn't work. :/

Added 10km radar on the drone, and radio strength dial.

I have tested and want to please all fans of this drone, it works!

The engine cooling has been remade, also the batteries got buffed. Expect 70min of operational time, 215kph speed with gyro and alt hold, around 30km of radio range. The overheating failsafe is still there if someone shoots a mingy rocket that is very very hot (onfire) so it tries to cool the engine if it reaches at 100degrees by changing the gear ratio, which won't crash the drone instantly. However that system is a bit useless

Okay, I hope you succeed

Maybe if i make the engine a bit more less stressed

Maybe the fact that he took off for the first time after the fall is just a coincidence.

I turned off the engine overheating function, the drone still fell to the ground, but then I was able to take off, last time I couldn't take off again, but if the vehicle damage function was turned on, it would have crashed.

To be honest, I didn't understand anything, I absolutely don't understand stormworks the way I just sit in the workshop. Can you fix this problem or is it impossible?

Only if you remove the engine failsafe which isn't impossible just find the engine controller and set that to 120-130

That doesn't let the engine explode, can't get away from the failsafe which stops the engine at 100 degrees.

The game seems to have a function with overheating protection, I have it turned on, or is there something else?

Well this may be annoying cuz 1 year ago it didn't have overheating problems... after all when I made it I tested it for 1 hour to test if it overheats

I think is the antioverheat failsafe

It's very funny, forgive me, but I tested it again and it started to descend again and you can't gain altitude. One time it was even when I didn't turn on spin mode.

I didn't see the message, thanks for the correction, I will continue to test the drone in multiplayer with friends, then I will offer to add what is most needed for a drone and a comfortable game, THANK YOU!

Maybe you can make two modes?
1 - old spin
2 - new spin with reduced yaw effectiveness

Fixed it, make sure to update the drone

Ok I will take a look at it when I can

In the video: frequency setting, take-off, camera mod, bug.
Time-codes: until 2:30 - take-off/enabling the functions, after 6 min - bug.
https://youtu.be/ulsrC-5fsec

I didn't use the infrared mod during the fall, I forgot, I think it doesn't affect much, although I don't understand it.
During the fall, I can control the functions of the drone, change the thrust, change the cameras, turn off and turn on the functions, but even if I turn off all the functions and try to take off again, the drone will simply stop accelerating more than 60.

Also try this with 0 addons in the world, i know it makes no sense but try it.

And set frequency's like this: 1001 control 1002 1003 video, my tests were conducted on these frequency's.

I don't think the gps destroys the control, but if you give me solid video with the problem, i can test it myself

Record a video post it on youtube and I will understand what happens, but do this: activate infrared, and when you lose control the infrared should deactivate, if that happens it's the game or the frequency like put it idk 7538 something interferes with the control, however from my last tests this interference problem has been fixed.

Maybe we didn't understand each other, and you fixed another problem, but this one hasn't disappeared. I was at a distance of 500 m from the TABC-79, but the drone began to descend sharply again. Fortunately, he landed on the runway, then I tried to take off on him again, but he just did not want to take off, did not gain speed over 60 km/h, while all functions were disabled. The frequencies were included on control: 1003, video 1/2: 1004, 1005. At the same time, I flew on endless fuel, energy, maybe it interferes, I do not know.

In the meantime I also created an advanced CIWS system and one of the first if not the first automated rocket pod artillery system.

I found the fix, the fix is set frequency's over 1000 like for example: control 1001 video 1: 1002 video 2: 1003

I hope you find the right person to fix this bug as this is one of the best UAVs currently in the workshop, thanks for your work.

OK, thanks for the feedback, we will wait for fixes of this bug of the game

When I deactivate all the functions after the camera control mode, my drone just flies down like a glider, although the thrust is set to 100, why?

Upgraded it, the tabc's got indicators and a map showing the drone location. The drone got the gps and that's about it.

Maybe I'm just doing it the wrong way, add icons of all functions to the screen so that you can see which ones are enabled.

Gimbal Mode does not work, when I turn it on and switch to the lower camera, the thrust decreases anyway

nvm i got it now xd

The controls were activated using the [Activate control station] button from the driver left side?

i cant make the UAV to move? the controls arent working

Update coming: New hud, adding artificial horizon and a compass, the overall hud won't be harder to understand, because the compass will be green and the horizon will use white brown and blue, not interfering with the green information on left.

Tbh that reposter, well doesn't really bothers me too much, cuz it won't do anything bad to my creations, but yeah it's true, reposting isn't nice, thank you for telling me about it tho.

You have exact information in the spaa about the drone, so yeah use the TABC-79m, for best use, when you feel ready you can make your own control station, I don't mind, the TABC-79M now is an spaa so it's no more only a control station. The controls are also in description.

how do i controll it