Желательно сделать не пешеходные, а транспортные соединения с водозабором и колодцами. Для начинающих в ранние времена водопровод не историчен, а вот конная подвода вполне в духе времени. И еще можно у всех объектов убрать требование к электричеству. Я лично везде проставил строку $ELECTRIC_DISABLE

As others had noted, there is a problem with the connections. I had managed to fix the connections and now they work as intended. If you want, I can share it with you.

I look forward to the updated set. it is very useful when it works well

@Comrade Sky , If nothing has changed in the latest patches, connections should be able to connect, although sometimes there are problems with this.
As time has shown, connecting to a straight line without bending pipes was not the best idea. As soon as possible, I will add models with alternative connection points, but so far there is no way to do this...

this is a great set, but you should update the config file to make it work properly. It would be very useful then

The connections ARE at the same point and I can't get it to work. I have to add distance between them. Better make one point the other way and just slightly further away

一本目の配管をつなげた後二本目の配管をつなげるには、別の場所（当該井戸ではない）からドラッグする必要があります。

We have to drag secondary pipe from another place (NOT the well) after connecting primary pipe.

Alright, I'll give it another try then. You are right though, everything is right on top of each other but I don't really think there's any way around that because it's so small.

@Pequod pipes can be brought in from either side, this is a problem with the display of markers due to the fact that the connections are almost at the same point.

As others have mentioned, the pipes cannot be rotated. It's frustrating to work around but the mod is still useful if you're going for a 'rural village' aesthetic or are doing an early cosmonaut mode start.

No, this is NOT "the way it should be". Every other mod and vanilla building rotate their connections, when the building rotates. Only these items don't, no matter what you do the water (export) connection below ground does not rotate.

@ROBINO the pipes work when you do them in a very specific order. Too frustrating for me, so in the end I just decided to play normal-scale.

troll mod - avoid
deliberately designed to frustrate the piping connections
the author is having a good laugh at us

RedDog, That's the way it should be. Thus, you can connect the pipe directly from any direction.

The river platform works properly. On the other items, the direction of the pipe connections cannot be changed. When rotating, only the footpath or road connection rotates, the pipe connection orientation stays the same,

This is a great idea!

Mod Monday video with your mod in it.
https://youtu.be/b4YELKBrbBo

Классный мод. Автору респект.
Приглашаю всех на стримы https://www.youtube.com/c/maestrokvartira1

Noice

nonsense to reality

I guess it can be wrangled to work, but it's really fiddly. Making the pipe from input to output did the trick.

Zyrofumi, try connecting from the other side, from the pump to the water treatment station, or vice versa. On the one hand, you must connect. Pipes have a bug...

If it doesn't help, I'll think about a fix

I was trying to connect the pipe from the clearing water thing and the pump and that doesn't work always was saying "crossed not allowed" any ideas?

KarolOfGutovo, try connecting the pipes in the reverse order - from the water distributor towards the well, this should work.

I have a little bit of a problem with these: they don't have any dimensions so the connections are all in one place so you can't connect two pipes to any of the pumps/filters

Отличная работа вдохновляет!
Спасибо!

Oh FINALLY! Thank you so much!

So much needed, well done!

Amazing! All we need now is a dump spot for sewage

well done!