Stormworks: Build and Rescue

Stormworks: Build and Rescue

XH-76 Hamster
22 Comments
Froderfox 9 Sep, 2024 @ 10:42am 
how do i unfold the rotor tail?
NebulousIdiot 3 Sep, 2023 @ 7:28pm 
I faced it forwards, and it gets stuck going down. Backwards, even with tail folded, it goes all the way down pushes the copter in and gets stuck going up. Not sure what I've been doing wrong
Mobius 1  [author] 31 Aug, 2023 @ 6:49am 
Also, thanks a bunch, you can upload what ever you want ^^
Mobius 1  [author] 31 Aug, 2023 @ 6:48am 
You want to land facing the front of the sub. Then just try to line up the rail, so it locks in. Then pitch, this will slide you forward or backwards on the rail. Pitch to line up the mag. The loading mechanism I feel is in a bad spot, so I may be updating that soon. I hope this helps :microraptor:
GR4-ghost26 30 Aug, 2023 @ 7:12pm 
I'm having a issue docking the hamster,do i need to land on a specific place on the rail?
Rusty 1968 Chevorlet Impala 23 Jun, 2022 @ 2:21pm 
if you want me too i can make one with light auto cannons for you and just publish it for a second them you can subscribe and re upload it with your name and ill take mine down. I'm all good with you not putting my name in the special thanks part or putting my name at the bottom of the description.
Rusty 1968 Chevorlet Impala 23 Jun, 2022 @ 1:53pm 
the whole aircraft carrier kit is just amazing at how the electronics and logic works is Guinness
Mobius 1  [author] 23 Jun, 2022 @ 12:50pm 
Sure. I can do that when I get a sec.
Rusty 1968 Chevorlet Impala 23 Jun, 2022 @ 11:47am 
can you update it for weponds dlc plz
Mobius 1  [author] 13 Sep, 2021 @ 5:52pm 
https://www.youtube.com/watch?v=5X8VtQ7G3Bo&t=3s
There ya go, and just skit to 4:25 to save yourself some time. I feel videos help the best :microraptor:
flamingtext 13 Sep, 2021 @ 5:20pm 
how do i make it go into the hangar
Chillow 11 Sep, 2021 @ 8:09pm 
whenever I try and go forward it just leans forward and runs into the ground and blows up and catches fire.
Mobius 1  [author] 9 Sep, 2021 @ 8:09pm 
Its updated, and working on my end ^^.
Mobius 1  [author] 9 Sep, 2021 @ 8:05pm 
@PilotSanders You are right. There was a issue unloading the chopper. It looks like I added a not gate were it does not belong. When I fixed the chopper rolling off the pad during re spawns. I am doing a quick test, then I will update it. Thanks for letting me know. :microraptor:
Mobius 1  [author] 9 Sep, 2021 @ 7:25pm 
Thanks :microraptor: and yes. both the sub, and helicopters circuit breakers must be turned on. I hope this helps.
PilotSanders 9 Sep, 2021 @ 6:14pm 
I am having an issue with the heli undocking in the Sub do I have to leave the power on so the connector doesn't disconnect. Also hope you caan add hold altitude and autopilot later on. Other than that loving this heli with the carrier sub
Mobius 1  [author] 9 Sep, 2021 @ 2:00pm 
If you turn off the stabilizer for long distance flights, that should help a bit. It will still be stabilized, but it wont force you back to a center position. That way, you can control your pitch angle easier, and it should work a lot better. I hope this helps. :microraptor:
drtbiker363 9 Sep, 2021 @ 7:09am 
mobius 1 when ever i go foward the heli looses altitude and when i try to use my collective to go up it doesnt work and you kinda have to feather going up or just get a lot of altitude and then go foward
Mobius 1  [author] 6 Sep, 2021 @ 12:36pm 
There ya go, I was right. I totally forgot to disconnect something. Just make sure to turn off the circuit breaker after shutting down, and you should be good to go. I hope this helps :microraptor:
Mobius 1  [author] 6 Sep, 2021 @ 12:27pm 
Something might be draining the battery's. I recommend after shutting down to always turn off the circuit breaker. I will also look into it. I could have left something improperly connected as well. Thanks for letting me know. :microraptor:
munchkinaj blw.tf 6 Sep, 2021 @ 12:17pm 
Mobius 1. If I use this I can only start it up once. if I try to start it up again after that it only gets up to like 86 RPM before it stops getting any more RPM and because of that it doesn't work
Snipey 5 Sep, 2021 @ 11:43am 
cool