@The_Ich
i did some testing, now a few month in the past, while having wc in the world as i wanted to adjust the rocket speed to the changed gridspeed and it caused wc based rocket launchers to no longer work which is why i say it shouldnt be touched.
as it didnt happen without wc i am just avoiding touching any of the weapon options as long as wc is in the world and its also why i didnt report it in as i didnt know the whole section should be skipped if wc is in use.

@Krateria
All settings apply to the whole world and therefore everyone.

@Abisius Xarvenius Carbensius
Just for clarification:
The entire section regarding Weapon adjustments is skipped, when the WeaponCore mod is used in the same world. There is no risk involved here.

Also the UI section for "Weapons" will only display the Searchlight settings in this case, which is uncritical to adjust alongside WeaponCore.

@Krateria
as its worldspecific once a value has been changed, the world saved and reloaded on host side it applies to all that use that world.

though you should make sure that no other mod that wants to change the same thing takes a bad take on having stuff changed via this one.
for example:

- aerodynamics has no prob with speeds beein changed even though it has a speed change by itself.

- weaponcore takes it badly if you change weapon related values via this one as the settings from this one are changing stuff based on the vanilla weaponframework which gets replaced by weaponcore with the weaponcore weaponframework.

on dedicated server, when en admin user changes something like top speed, does it changes for everyone?

Yeah, it was relative top speed. Another mod I want to learn, but in this case, it was just causing confusion. Only realised it was in there when I kept searching for it in my left-side list but it would never show up, despite being subscribed.

Entirely my fault.

Forgive me, I did a dumb. I had relative top speed in the mod list without realising, testing now with that mod removed.

@GadenKerensky
did you save and restart se before loading into the world again after changing the value for grid speed?

i for my part work with 150m/s for large and 200m/s for small grid as speed limit and can move 210m/s with my char.

if you mean the speed for the rocket launcher that needs to be altered inside a specific file provided by wc itself when wc is useed as already mentioned and file alterations should always be done with se closed.

That's fine with me, I don't intend to modify WC stuff much, just making sure what I should and shouldn't do.

Just gotta figure out what the best way to increase speed actually is. For some reason, even after increasing small grid speed to 250ms, it can't go above 110ms. I do have the aerodynamics mod installed, but I upped the speed there too, and I tested that in space.

@GadenKerensky
dont touch any of the weaponrelated settings if you use weaponcore as it has the possibility to break stuff.
the weaponsettings are made to work on vanilla weapons and when you use a mod that replaces the vanilla weapons you shouldnt touch the settings related to the weapons beeing replaced.

that said if my brain isnt totally of the wire there should be a file where you can modify some settings related to wc based weapons, info about that should be inside the github based wc wiki which is linked inside the moddescription of wc itself.

Does the missile speed parameter matter if you're using WeaponCore?

@The Lapis Fox
if none of the mods using the interface of rich hud are showing up in it it might be related to rich hud.
as i havent noticed it on my end i would guess it could be either a mod conflict or a case of file corruption related to rich hud.

In fact, none of the Rich Hud mods are showing up in it, only Rich Hud Itself.

This isn't showing up for me either. I've tried to unsub and resub and that didn't fix it.

@Skinner yu need to use “F2” to have access to the configuration menu then once you set it the way you like it then save quit and reload and your good to go.

I subscribed to this mod, but nothing happens when I press F1 after pressing Enter. I've installed the Rich HUD Terminal as well. Am i missing something?

thanks bro

Wow, quick response, tyvm!

Thanks a ton for the quick update!

Guys pls it is just like 1h after the update so leav him some time

It should be resolved now.

Yes, little brother, please fix it, it doesn't show up in MasterHud.

Same here

After the Apex Survival update this mod doesn't seem to be loading in the Rich Hud terminal. I open it up and I do not see this mods section under it--only build vision and build info.

@Thomas Godwin
This mod loads the default values during the first time and stores them in the config. Then the stored values will always be applied on subsequent loading. So if a vanilla parameter changes with an update or another mod, this mod will still apply the old stored default value.

If you want to make sure, you are using the new default value, you could reset your config and apply your desired changes again or modify the value directly (if you know, what has changed).

Regarding the mod breaking itself, I do handle all parameter gracefully, so if there is a breaking change, it will hopefully only affect this parameter. But of course there is a always a chance, that certain core functionalities won't work anymore. This has never happened with an update so far, but I will try to check on Monday.

Planning a long-waited collective game after Apex Survival update.

Any chance this mod will break vanilla parameters that were not manually modified at first day of A.S. release, or it takes it's basic values from engine itself?

@Souls
works the same as in sp or coop:
change stuff, save, stop world, load world

just amke sure you dont change stuff that is changed by other stuff that reacts badly to that stuff beeing changed, for example changing weapon related things while having weaponcore in the world.

How does this work (if at all) on a dedicated server? Tried using it to disable the armour edges but nothing seemed to change. I have admin rights.

Ok my bad.. As my detector block already existed before I added this mod, I didn't readjust it's range settings (it was still set to 150) . Now it's working fine :)

No it's the vanilla one and I did restart the game

@sushen
is it a modded ore detector or is another mod influencing it?
if one or both is a yes then it might make things not work as intended.

besides that for me the change of the ore detector values is kept if i change it, save, unload the world, restart se itself and then load the world again from that save.

Ore detection range does not seem to be working.. changed 150m to 300m, saved and relaunched the game, and my ore detector has still have a 150m radius

@7T Primal Wolf
to my understanding -1 means the setting is turned off.

@Shaquille Oatmeal
i have no probs with cursor flickering when using rich hud master and it just provides the menu to change settings for mods and you wont be able to load configurable arameters without stuff listed in its modrequirements.

i would suggest checking in a new world with just configurable parameters and its requirements if you can reproduce it and if changing some mouse settings (for example pointer acceleration) changes stuff.

does this mod require that HUD mod to work? obviously to change the settings it does, but since the HUD mod causes issues with my cursor flickering, i would like to disable it, ive got my parameters set to what i want and wont be changing it anyways

How do the armor Light/Heavy Armor Resistance & Deformation Ratio settings work? right now their set at -1

Perfect mod!

@simfrek
are you using any mod influencing the speed of grids even if just as a secondary function?
if yes play around a bit with the loadorder between it and this mod as it might block it out.
also keep in mind that you need to save a world, go back to the menu and load the world again, on servers you will need to save the world manually or wait for a autosave to happen and restart the server.

I can't seem to get the max speed to change, any suggestions to fix this? im happy to provide any logs if needed

how do you access the hud?

@Wafflesaga
I also could not reproduce this issue using these 3 mods in a new "Empty World". Though the existance of planets should not really matter, since this mod is just changing the definition of a planet and not the concrete instance of it.

According to the stack trace, the error ccurred within the initialization of the UI. But for me it is hard to tell, what was not correctly initialized.

Do you have a reliable way to reproduce this issue?

@Wafflesaga
for me in a solar system world that doesnt happen, are you absolutly sure its no case of file corruption or modconflict?

i have cp, wc and a bunch of other mods (modlist https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=2425314026 ) in a survival world startet as solar system and it works splendig.

Found A problem.
When loading rich master hud, configurable parameters, Weaponcore 2.5 in a instance with no planets the mod dies.

Error Details:
System.NullReferenceException: Object reference not set to an instance of an object

at
ConfigurableParameters.ConfigurableParametersMain.<GetPlanetsSettings>d__27.MoveNext()
at
ConfigurableParameters.ConfigurableParametersMain.InitSettingsMenu()
at ConfigurableParameters.ConfigurableParametersMain.hudInit()
at RichHudFramework.Internal.ExceptionHandeler.run(Action Action)

dosnt seem to work with IO

@OldPayphone it apllys to all blocks in your game, so also to other ships and stations

Does the armor settings like armor resistance apply to all ships in the world just my own?

Does this modify the game .sbc files So that after we make the configurations we want we can then remove this mod? or will this mod need to remain active for the changes to stay in place?

most useful mod
how have i not found this earlier?

In the Economy Option, where you change the values, I need to apply: <ListingFee>0</ListingFee> and <TransactionFee>0</TransactionFee>,
Do you know how I can get around this?

I do see a confirmation in chat, yes. Hm. And using the official DS, not Torch. I'll try and reproduce in a singleplayer world, or on DS w/ fewer mods, and get back to you - is there a better place for issues? GitHub?

@ELLIOTTCABLE on Discord
Sounds like you only have the "Spacemaster" role (Has access to Space Master tools) but not the "Admin" or "Owner" role. When you change a parameter, do you see a confirmation message in the chat? If so, the server should also then save the new values.

If you definitely have the admin or owner permission, I would suggest to try it on a fresh world, then on your existing world without other mods and so on to determine, if there are any mod conflicts.

And please note, that I only added support for the official dedicated server application. If you are running any third party server tool and it does not work, I cannot help you there.


If you have access to the Sandbox.sbc file, you can also directly copy and paste the configuration there from another file.