What are the toolbar presets? The blueprint removed numbers 2 through 5

@KolenboerNL Hey thanks for feedback. Unfortunately i lost the original and cant update the blueprint. Please check the updated two images and the description to solve your issue. If you paste it in in creative there is a damaged conveyor wich needs to be repaired manually.

nice build, i cant get the Stone Ejector working, maybe got a tip, tried everything :)

Built it, set it onto the ground, and it literally klanged so hard it deleted half mine and my friends survival base.

So when the front left piston get made on this thing for me it yeits itself out of existence. Can we get a version with no pistons Can add pistons after but kinda useless if we cant build the thing

@ Mr Rockstar: you can get rid of them. If i remember right they´re just to lift the vehicle for maintainence.
I dont know why some people face clang in this vehicle. I guess its just SE hot it is. I tried my best to avoid clang.
@Dino: go for it =) theres no version of it from me.

any reason why the *lift* pistons start to clang out? they caused the truck to go flying a few rare times and right now they are just clanging but no damage yet. can i get rid of these without breaking the thing

is there this car, but the drill is replace whit a missile. and color to green.

Hey Mike, projectors only handle a single grid. Parts connected by hinges and rotors count as different grids. So you need to construct the vehicle body and the lift arm seperately. Look at my comment from 10th january, there i describe how you may build it in survival.
Hope that helps. :) if you got more questions let me know.

We are trying to build this in survival but keeps saying multiple grids not supported. How can we implement this into our world

Thank you for explanation and your hard work on this beautiful truck.

@Juba: Hi, if i got you right it should work when you lock the hinge in the block options before you place the piston. If the hinge is powered it will stay in position.
If the position is not right try to paste the vehicle in in creative and note the angles of the hinges (depends on the position how you wanns build it: folded or not folded) and then drive the hinges on your build to the correct angle before placing the pistons. In the end there should be only one hinge left where hinge and hinge part are not attached and if all positions are right you can easily attach it in the block options.
I hope that helps you.
Have fun.

Hello, thanks for the great work. Details and functionality is awesome.
I have tried it in multiplayer survival via Multi Grid Plugin. Only parts that I'm having problem on building are 2 pistons and hinges under driller arm (the ones simulating raising the arm.) When I build the one of the hinges and then a piston next, piston falls on truck like free falling.. Is there a way to lock hinge while building? Or something like that?

Fortunately there are enough workshop items for everyones taste. :)

Oh my god, another "mining rig" vehicle on the Workshop that doesn't actually do anything or work.

Imagine my shock!

@TheRealJJRabbit You have a good point, but im just kinda skeptical using suspentions with such a large vehicle along with the drill arm on top. For manual access I cut a small hole to access the storage containers on the side and connected a side connector to it. It works with my cargo truck to transport the ore back to my base.

@Austin_Legend: thanks im glad that you enjoy it now. I just dont like visible connectors. They‘re ugly :D
What i do for my rovers is that i set up timer blocks to lower down the suspentions to the minimum with one button and also hook up the connector switch lock.
So there can be a big block connector in the ground level and when you park your rovers connector right above it it lowers down the vehicle and connects with the push of a button.

The new refined version is an extreme improvement. I still am a little annoyed at the lack of access to the connector, but is a serious improvement and modifiable since I can read the block names. Thank you for refining it and im excited to use it in my survival.

Ahh, that explains it. Thanks for the reply, I thought I was going mad :-)

@Chrisbitz:The Blueprint is only for the whole construction. If you want to build it in survival i recomment pasting it in a creative world, disconnet the arm via the hinge and then make a blueprint only for the arm. Then build the parts seperately in survival and build the pistons manually. Will mean that you need to make new controll groups though. At least this is my best attempt to do so. There may be smarter ways out there.

Is the blueprint for the subgrid included in this blueprint, or is it somewhere else?

I've seen the video about putting a projector on the rotor, but is the blueprint for the arm actually in the main blueprint, or is it somewhere else?

Thanks for the comments. I updated the blueprint and cared about the random explsoions and translated all in english. Please let me know if things still go wrong.

@FireManDan yes right, but it give a projector subgrid mod and this mods works fine.

@Odin no i don't speak english, i use the google translator and, it destroys itself?

@FireManDanThanks for your help

If you are an English speaker, Don't bother wasting your time on this, you have to Translate Everything From German. You will spend more time doing that than you will actually using it. The thing destroys it's self after first use.

@taipay the drill arm is a subgrid. Anything built on the end of a rotor, piston, hinge is called a subgrid. you cant not build subgrids via projectors. You would need to place another projector on the subgrid, and use a seperate blueprint of the drill arm to build it.

Watch this, it may help:
https://youtu.be/TnQPnh8EJsw

Nice blueprint. all fully worked. Thanks

the projector doesn't show me the drill arm, what do I have to do, Mammut is done, but without the drill arm

Agreed With Austin_Legend Does not help that EVERYTHING IS IN GERMAN.

Ive been trying to get this thing to work for the past day with no success. Do not use this if you seriously want to mine ore.

The connector is extremely inconveniently placed and the ejector puts ore everywhere. I would not recommend this for survival even if you spawn it in.

How am I meant to build this thing? There are more than one grid, so the projector cant project it fully

intresting design. Timing is screwed. Does not fully retract arm due to the weight of ore. Suggest some edits. Also language barrier...

@robosium They just look that way cause they are on the wall facing that window.

Yeah, there are many pistons... Put a Gyro on the Drillhead...it solved the problem for me.
BTW, nice build, thank you ! :-)

I have the Problem that the thing explodes when finished

In the first pic I'm pretty sure I can see some transparent LCD screens which are from decorative pack #2

doesnt retract the piston after its finished, freaks out and destroys the drilling arm, also had to google translate every single thing so i could figure any of it out.

looks good, ill have to try it out