Hi, thanks so much for your mods.

Imo, armor (well, any set of diagonal blocks) could use an unobtrusive corner connector. Like, look at 2x1 panels for example: you can connect 2, then you need some sort of clunky block for the 'next' base/tip panel to attach. Or Stairs. Some kind of rail/widget that goes along the very edge inside the corner where they don't meet would be amazing. I've seen them for mods with stair blocks.

I think even if scaffolding had a rail that just went along various lines that would be lots good enough. The edge I've already described plus one from corner to corner on face of the cube and one more from the longest direction between corners in 1x1x1.

I can't find a half slab corner block, like a 1/8th block, is it possible to add that?

What happened to the old textures? They were much less repetitive.

Those are in vanilla... They're one of the most basic block shapes

Any chance you can add 2x1 slopes? Combined with the 1x, 3x, and 4x it would allow for pretty decent circles.

That's because I hid them when Keen added their own versions of the blocks. I didn't remove them completely though because that would've broken builds such as that starter ship.

Playing on a server that has your mod installed. Starter ship has "light armor plates" from this mod on it. I can't find these plates anywhere in the G-menu.

Have you considered doing a mod for additional panel shapes? I'd love to see a panel set with your attention to detail. :)

That's the reason why the default player models have bigger collisions.

What is up with the collisions? I`m using slimmer player models and i keep falling through slopes.

Hi enenra could I please upload this as apart of a server basemod so I can add custom material variants of this and disable the heavy armour variants?

we need inverted transition 3x1,4x1,& 5x1 really all them need an opposing block but i noticed i have to use 1 block pieces to match the other side when making wings on my carrier

is it possible to make the blocks work with the Aerodynamics Physics mod? i love using them for my builds and recently discovered the mod.

Any mod out there that has even longer armor slopes? Like 8x1 or 10x1

sidenote i just realised that on smallgrid, the inverted corners have a lot more steel plates than they really should (60% increase from 1x1 full block on 5x1s)
the slopes also have this issue (they have the same density as full blocks) as well as the transition slopes, i have yet to check for heavy armor

hey could we ever get the subpieces for these perchance? like base/tip/middle/etc like the 2x1s have?

Ah, I see now

That's because this mod had them before the game did. :-)
And that's also why those shapes are hidden. I didn't remove them entirely because that would break people's builds.

Think I noticed two blocks already in the game that is on the mod, the Light Armor Square Sloped Corner Tip, Light Armor Raised Sloped Corner

Just 4 blocks.....
armor block 1x1 length 3-6
armor slope 1x1 lenght 3-6
armor slope 2x1x1 base lenght 3-6
armor slope 2x1x1 tip lenght 3-6

and maybe
half armor block 1x0.5 length 3-6
hslf dlopr lenght 3-6

You might have a corrupted download, please try these steps: https://spaceengineers.wiki.gg/wiki/Fixing_Download_Corruption

this mod broke for me after the update. makes the game crash..

Dude this mod is my go too, and is the only ramp mod I use that is actually good, I just wish it had a 6x1

MAKE 6X1S AND MY LIFE IS YOURRRRSSSSSSSSSS!!!!!

make 6x1s and my life is yoursssss

Sounds like you haven't gotten the mod update yet or a faulty download. See: https://spaceengineers.wiki.gg/wiki/Fixing_Download_Corruption

So, some friends and I were playing with the mod, and I (host) do not see the 5x1 slopes, but my friends do. However, when they try to place the 5x1 slope their game disconnects them, then reconnects them because of standard SE stuff.

I don't think I'll be adding 6x1 but I am planning on expanding sideways into 5x2x1, 5x3x1, etc. up to 5x5x1. As for larger than that I'm considering options for going a step up and making 10x and 15x blocks. Not sure yet though.

I love the new update, I know this is an incredibly niche thing but would you consider adding in 6x1 slopes too? I think they'd group nicely with the 5x1s and it would allow this mod to serve as a good replacement for the armor ramp conpendium mod. Which has 6x1s.

I followed the guide listed on the Mod Adjusster page without success. Since you says it does work I must have done something wrong. I will take another look. thanks for the response.

Replacing the components of the existing blocks via ModAdjuster is definitely possible.

Mod Adjuster doesn't handle what I am trying to do. I want to add blocks with the models/icons of your blocks, but have components from the Star Trek Mod Pack (Tritanium Plate and Duranium Grid). I tried both adding new blocks, and replacing build components of the existing blocks. Neith works.

Would you add support for Structural Reinforcement ?https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=3029470356

I didn't realilze mod adjuster would allow you to change component lists. Thanks for the info.

I won't be making that but you could use ModAdjuster to make such a mod - no need to reupload. :-)

Would you be open to me making a version of AQD - Armor Expansion which uses the tritanium armor from Qarannia's Star Trek Mod Pack? I mostly want this for my server, so a private/server-only restriction would be acceptable. I feel it would be interesting to the public, but that is your call. Thanks for your consideration.

Ah, yes, there really is a mirrored version! I picked the habit of loading only groups into my toolbar thinking I could find everything this way. :v
Anyways, thanks!

They have a mirrored version, but it's not in the block group. You'll find it if you browse the armor category or search for the block's name. They're marked with a mirror symbol.

The slope transition blocks could use a mirrored version.

Could you add 3x1 and 4x1 armor panels? They're exactly what I need for my current ship and I can't find them in any other mod so I decided to ask here since this is the best armor expansion mod texture-wise.

I have not updated this mod since Feburary.

ok after last update coming out problem not just with IsAirTight options but it crashed all world after you try to turn off projector or grind it can you fix it?????????

well that sucks ass

It's not possible to do so due to modding limitations.

The lack of blending with vanilla armors looks very strange with the borders, the edges of the armor stick through, is there any way you could update the mod to connect like normal blocks or create a patch that does that?

Good to hear!

My apologies, It turns my game was just really bugged out and after a re install everything was fixed! Glad I was wrong!

It is impossible for this mod to mess with voxel textures. Nothing in it even remotely references them.

Hi! So far I really like you're mod however it has a major issue. If you change your graphics settings presets while this mod is loaded it completely messes up the voxels on a planet. The grass on Pertam suddenly became stone for me.

Hello. So there is still a missing corner in the game that should be in the base game but isn't The piece I speak of is the light/heavy armor square sloped corner base inv. or inverted. It would be just like the light/heave armor square sloped corner base and light/heave armor square sloped corner tip that we have in the game now but of course inverted. We do have the light/heave armor square sloped corner tip inv. or again inverted now but not the base as mentioned previously. The best picture description I can give you is to take the light/heave armor square sloped corner tip inv. and put it on top of the half light/heavy armor block to get the piece i'm trying to describe.I sure hope you can make sense of what I'm trying to ask for lol. If you can make it then thanks in advance and if you can't my ship will be forever screwed lol.