Stormworks: Build and Rescue

Stormworks: Build and Rescue

6 Speed Smooth Automatic Transmission
15 則留言
Jayed 2023 年 10 月 19 日 下午 6:15 
Does the read go to the engine and green for when wheels?
bluepeanut; Happy In Design 2020 年 7 月 13 日 上午 2:55 
Thank you WALLE, I was having some difficulties creating an auto box for a 37m tug boat so i needed a good auto gear module. I have dropped 4 of your auto boxes into the boat, to power 2 huge propellers and i'm happy with the results so far. Now i need to work on:
1) at about 35 RPS, the speed tops out at 11 and i would like 14 - 15
2) The auto shifts up through gears 1-5 very quickly and i'd like to hold onto 3 & 4 a little longer
3) I almost have to cut the RPS to get the gears to shift down

Any suggestion?
turbhoe 2020 年 6 月 11 日 下午 10:22 
My gears are inverted, 6th is the most torque and least speed but 1st is the highest speed and leas torque.
Shaquille Oatmeal 2020 年 5 月 10 日 上午 4:55 
the transmission is a little bit bulky and big. Might you be able to make a smaller version?
AB01 2020 年 4 月 19 日 上午 6:13 
Hi, I put your transmission in my truck. Thanks alot!
Jatojay 2020 年 2 月 15 日 上午 12:05 
suffering a drastic loss of power in 6th gear
WALL-E  [作者] 2020 年 1 月 20 日 下午 1:45 
AirplaneLover620 Your wheels are probably on the wrong way around. Look at the + and - arrows on the wheel rims and make it so + is the clockwise arrow.
wxairy 2020 年 1 月 20 日 上午 9:31 
When i test my vehicle, when it is in the forward gear, ti goes in reverse. how do i fix that?
BasicFrog 2020 年 1 月 17 日 上午 10:31 
i might also modify it
BasicFrog 2020 年 1 月 17 日 上午 9:32 
can i use this in one of my vehicles?
Shaquille Oatmeal 2019 年 12 月 21 日 上午 1:22 
Thank you. 😊
WALL-E  [作者] 2019 年 12 月 17 日 上午 11:02 
I have added a reverse gear. Read description on how to access the gear.
Shaquille Oatmeal 2019 年 12 月 14 日 上午 5:05 
can you add a reverse gear to it please?!
WALL-E  [作者] 2019 年 11 月 15 日 下午 2:50 
Connect all the required inputs to the microcontroller.
Moon Truther 2019 年 11 月 15 日 下午 2:17 
Other than connecting the input and output, is there anything else i need to do?