Barotrauma

Barotrauma

Corollary I
Showing 1-9 of 9 entries
Update: 19 Jun @ 11:10am

版本 1.1
重大更新,细节如下。

综合型+特化型
1) 修复了因为路径点导致的制氧机无法修复的bug

综合型
1) 修复了船员室排水泵无法自动关停的bug

(所有内容,均可在介绍图片中找到,此处为文字版)


Version 1.1
Major updates, details as follows.

Omni+Spec
1) Fixed a bug where the oxygen generator could not be repaired due to waypoint issues.

Omni
1) Fixed a bug where the drainage pump in the crew quarters would not automatically shut off.

(All content within the list can be found in the image descriptions. This is the text version for reference)

Update: 1 Jun @ 3:05pm

版本 1.0
重大更新,细节如下。

综合型+特化型
1) 重做了猜想级深渊登陆艇,并修复了其挂载位置,大幅度优化驾驶体验
2) 修改了贴图深度+船舱内饰
3) 讲驾驶舱镜控的舱外摄像头改为监控中心控制

特化型
1) 重做了注释级自动跟随无人机,目前改为镜控操作,离控后会保持悬停。跟随系统大升级,并在里母船过近时自动关闭跟随。

(所有内容,均可在介绍图片中找到,此处为文字版)


Version 1.0
Major updates, details as follows.

Omni+Spec
1) Reworked the Conjecture-class Abyss Landing Craft, fix its mounting position and significantly improving the piloting experience.
2) Updated texture depth and interior decoration of the cabin.
3) Reassigned the external camera previously controlled via the cockpit mirror interface to the surveillance centre.

Spec
1) Rebuilt the Note-class autonomous following drone, now operated via Periscope controls. After disconnection, the drone will remain in hover mode. The auto following system has been significantly upgraded, including automatic disengagement when approaching the submarine too closely.


(All content within the list can be found in the image descriptions. This is the text version for reference)

Update: 29 Dec, 2024 @ 10:13pm

版本 0.2.1
特化型
修复了注释无人艇的靠近泊位后自动对接功能缺失的问题


Version 0.2.1
Spec
The issue of the note drone's inability to auto-dock after approaching the docking point has been resolved.

Update: 10 Dec, 2024 @ 2:48pm

版本 0.2.0
综合型+特化型
修复了移动货架的升降保险失效的bug
修复了上浮/下潜时指挥舱视觉上漏水的bug
在此十分感谢Ryan Liu指出bug的真正原因!改正了我之前对bug的错误认知
(原因:移动货架的船体离指挥舱过近,且其水泵泵水效果无法被隐藏,故导致上下潜时指挥舱视觉上看似漏水,实则是移动货架的水泵效果的穿模bug导致的)


Version 0.2.0
Omni+Spec
Fixed the bug where the lift safety mechanism of the moving rack was not functioning properly.
Fixed the visual bug of water leakage in the command cabin during surfacing/diving.
Special thanks to Ryan Liu for pointing out the true cause of the bug! This corrected my previous misunderstanding of the issue.
(Cause: The hull of the moving rack was too close to the command cabin, and the water pumping effect of its pump could not be hidden, making it visually appear as if the command cabin was leaking water during surfacing/diving. In reality, it was caused by a clipping bug related to the moving rack's pump effect.)

Update: 7 Aug, 2024 @ 2:31pm

版本 0.1.0
综合型+特化型
修复了由于排水阀嵌入地板导致的无法触及的bug
为水密舱添加了隐藏式氧气排放口以修复bot因压载舱缺氧而中止修理的bug
修改了各舱室氧气排放口的配色
全面改良了自动门系统,并升级了其与对接仓的适配,大幅度优化使用体验
增加了此系列此潜艇的专属彩蛋
遮盖部分裸露电线,增加沉浸感
修复了一系列贴图深度问题


Version 0.1.0
Omni+Spec
Fixed a bug where the drainage valve embedded in the floor was inaccessible
Added hidden oxygen vents to ballast chambers to fix the bot stopping repair due to lack of oxygen.
Modified the color scheme of oxygen vents in various chambers
Upgrade the automatic door system and its compatibility with the docking sytem, significantly optimizing the user experience
Added exclusive Easter eggs for this series of submarines
Covered some exposed wires to increase immersion
Fixed a series of texture depth issues

Update: 4 May, 2024 @ 10:14am

版本 0.0.3
综合型+特化型
调节了反应堆的最大功率
修复了货舱排水不彻底的问题
提高了氧气机的制氧量


Version 0.0.3
Omni+Spec
Adjusted the maximum power of the reactor.
Fixed the issue of incomplete drainage in the cargo hold.
Increased the oxygen production capacity of the oxygen generator.

Update: 29 Apr, 2024 @ 3:24pm

版本 0.0.2
综合型+特化型
修复上出舱口的自动门在潜艇停靠站点时关闭的严重bug
游戏内修复十分复杂,建议使用新版本,对造成的不便深感抱歉!


Version 0.0.2
Omni+Spec
Fix the severe bug where the automatic door at the upper hatch closes when the submarine is at the docking station. Repairing it in the game is very complicated, it is recommended to use a new version. Deeply apologize for the inconvenience caused!

Update: 29 Apr, 2024 @ 1:24pm

版本 0.0.1
综合型+特化型
修复上出舱口的自动门在舱室漏水时无法打开的严重bug
如果你使用的是旧版本,可通过断开上出仓口两侧舱门其底部的继电组件的“设置状态”部分的电线来修复此问题

对造成的不便深感抱歉!


Version 0.0.1
Omni+Spec
Fix the serious bug that prevents the automatic door at the upper exit hatch from opening when there is a water leak in the chamber.
If you are using an older version, you can fix this issue by disconnecting the wires of the 'set state' part of the relay component at the bottom of the doors on both sides of the upper exit hatch.

My apologize for any inconvenience caused!

Update: 28 Apr, 2024 @ 12:00pm

版本0.0

Version 0.0