Space Engineers

Space Engineers

TCES | Turret Controller Enhancement Script
Näytetään 21–29 / 29
< 1  2  >
Päivitys: 28.3.2022 klo 0.24

Version 1.3.1
Diffs: https://github.com/Whiplash141/SpaceEngineersScripts/commit/c099d0cc0d585b7e7109e702c82e57add3fb97c6
  • Forced assigned camera to be enabled

Päivitys: 24.3.2022 klo 14.47

Version 1.3.0
Diffs: https://github.com/Whiplash141/SpaceEngineersScripts/commit/9210022312befc28e8ddfdc2a27dfb7240a02a03
  • Improved control system for extra rotors. Extra rotors should lag less behind the main elevation rotor and you should now be able to use two rotors to move a single subgrid without them binding up.

Päivitys: 19.2.2022 klo 20.37

Version 1.2.6
Code diffs: https://github.com/Whiplash141/SpaceEngineersScripts/commit/cb28be623b724e52966b75ca3abf8f81873d3848
  • Removed AI turrets from valid tools list

Päivitys: 15.2.2022 klo 22.24

Version 1.2.5
Code diffs: https://github.com/Whiplash141/SpaceEngineersScripts/commit/2bfa0122844269230192256e4f8d5aefa4867035
  • Fixed bug where extra rotors would keep spinning if you hopped out with rest angle delay set to 0 seconds

Päivitys: 15.2.2022 klo 22.13

Version 1.2.4
Code diffs: https://github.com/Whiplash141/SpaceEngineersScripts/commit/ef85fafac0d0d775f9b3cf63a2d8fdd7d6098ca5
  • Fixed bug were weapons would keep firing with extra elevation rotors if you stopped controlling them mid fire

Päivitys: 15.2.2022 klo 15.07

Version 1.2.3
Code diffs: https://github.com/Whiplash141/SpaceEngineersScripts/commit/98e600a022f21264d837dd7fdb24eb52460398f2
  • Added custom data option to disable drawing title screens

Päivitys: 14.2.2022 klo 23.22

Version 1.2.2
Code diffs: https://github.com/Whiplash141/SpaceEngineersScripts/commit/6bd98eeacc5a3c1e5105132cba27a53c7d5fd8dc
  • Fixed NRE error when no azimuth or elevation was specified

Päivitys: 14.2.2022 klo 22.57

Version 1.2.1
Code diffs: https://github.com/Whiplash141/SpaceEngineersScripts/commit/21c1e483ea9fe1ab4cef252e66ccef1fcbc5e65e
  • Turrets will now automatically return to rest angle after a set amount of time. This can be disabled in the custom data of the programmable block.
  • Changed how rest angle is applied so that the CTC does not need to be disabled while returning to rest angles.

Päivitys: 14.2.2022 klo 12.01

Version 1.1.5
Initial release