Subscribe to download
SLM Mitsuya MK.1 Carrier

The Mitsuya class carrier.
This carrier is designed for space but can fly in 1.2g.

Build for vanilla+DLC survival and the blueprint is survival ready, all weapons loaded, reactors got fuel and the tanks are full.

This carrier is used for travelling long distances with it's 5000 km jump range and supporting the fleet from the rear or hunting small targets like pirates with the fighters it can carry.
The carrier got a medium and light armament to defend against fast and small ships that can reach the rear lines in fleet combat.
While the armament it carries strong, direct combat is not recommended because the armour is mostly light.

The carrier got a deck for larger fighters and quick launches.
Inside the carrier is a hangar for medium and small fighters or just storage.
The amount of fighters it can carry depends on the size of the fighters and if all of them need a connector or just lock to the floor.

/!\ Warning, the hangar is pressurised, not depressurising the hangar before use may cause the ship to lose a lot of oxygen.
Button 3 on the button panel in the hangar control room will toggle the vent.


Toolbar setup.
Page 1
1 - Camera front
2 - Assault Turrets On/Off
3 - Gatling Turrets On/Off
4 - Hangar Doors Open/Close
5 - Cruise On/Off (backwards Thrusters)
6 - Jump drive Jump
7 - Reactor On/Off
8 - Thrusters On/Off
9 - Refuel Hydrogen Tanks

Page 2
1 - Repair Projector On/Off
2 - Connector Front
3 - Connector Bottom
4 - Connector Rear
5 -
6 - Refill Oxygen tanks
7 - Interior Turrets On/Off
8 -
9 -

Weapons are automatically loaded by sorters, The ship is build for 1x storage (standard), higher x storage can make the ship too heavy.