Subscribe to download
ENDAIR B777-300ER [Extreme Realism]

The ENDAIR B777-300ER is a long haul passenger aircraft developed by EPVIN Aviation Company
Features Autoland , Storm-link for 100 passengers, Failure simulation and a [Extreme Realism] cockpit and procedures!

• For those looking for more realism this aircraft has its own complete MANUAL you can download here: https://drive.google.com/file/d/14d3yr2oVrX_bTNaa2kBRMF44K2bPhqb1/view?usp=sharing

Support Me!

Get the latest updates about our projects on discord! : https://discord.gg/8YrrV9YJHM
You can support me by joining my Patreon! : https://www.patreon.com/EnderPilot
You can also join me on my Twitch Channel! : https://www.twitch.tv/enderpilot


SET PHYSICS DETAIL TO FULL



HOW TO GET IN:
Go to any of the doors press the button below the window to open them then jump to the visible handle and bring your self up
OR
Use the "Home" Button on your keyboard and no-clip your self in!


STARTUP PROCEDURE:

You can read the startup instructions from here
OR
For more realism you download the AOM

Battery Switch..............ON
LEFT BUS TIE.............AUTO
RIGHT BUS TIE...........AUTO
Cabin Utility..................CHECK ON
External Power.............ON If Available
Fire / Overheat.............Test PERFORM

APU START
APU Start....................ON
APU Generator............ON

Cockpit Lights..............AS REQUIRED
Parking Brake .............ON
Flaps............................RETRACTED
Speedbrakes................RETRACTED
APU Air Bleed AUTO..........ON
Left ENG Bleed Air..............ON
Right ENG Bleed Air............ON
Left Pack AUTO..................ON
Right Pack AUTO ...............ON
Oxygen Passengers............AUTO
ADIRU.................................ALIGN
(Await for "ON BAT" Light to Extinguish)

Strobe Lights.......................ON
Navigation Lights.................ON
Logo Lights..........................ON
Seatbelts..............................ON
No Smoking.........................ON
Anti-Ice Systems..................AS REQUIRED
Window Heater................................ALL ON
ENG L & R Generator Control ...............ON
Centre Fuel Pumps.................................BOTH ON
Left Fuel Pumps......................................BOTH ON
Right Fuel Pumps....................................BOTH ON
Right ENG Hydraulics and Demand Hydraulics............ON
Centre Hydraulics and Demand Hydraulics .................ON
Left ENG Hydraulics and Demand Hydraulics .............ON

EICAS CHECK
Status EICAS Page.....All Hydraulics Pressurization Are Stable and Over 1680 PRS
Fuel EICAS Page......... All Fuel Pumps Are Active and Fuel Balance Is as Required
Electrical EICAS Page ............................................................................................
APU Generator Supplying Power to the Aircraft and Left and Right Generators
Are Active

ENGINE START
Beacon Lights..........................................ON
ENG R MODE START ............................ON
ENG R FUEL CONTROL CUTOFF.........ON
(Wait for ENG Stabilisation)
ENG R MODE START ...........................OFF
ENG L MODE START.............................ON
ENG L FUEL CONTROL CUTOFF ........ON
(Wait for ENG Stabilisation)
ENG L MODE START.............................OFF
(After Takeoff Turn OFF APU)

• AUTOLAND SETUP:
  
  Tip Take a moment before takeoff to input your desired coordinates and Altitude to the aircraft!
  
  *ADDING RUNWAY WAYPOINTS
  
  1. Set a waypointon the START of the desired runway
  2. Then go to the "Flight Plan-Autoland Coordinates" keypad
  and insert the waypoint into the keypad
  3. Press the "Add The START Of The Runway" button
  
  4. Set a waypoint on the END of the desired runway
  5. Then go to the "Flight Plan-Autoland Coordinates" keypad
  and insert the waypoint into the keypad
  6. Press the "Add The END Of The Runway" button
  7. *VERY IMPORTANT Check the FMC's third page to see the Frequency you need to import on the overhead numpad panel for your desired airport! (If the airport does not have a frequency you dont have to import anything)
  
  *To reset the Autoland Waypoints press the
  "Reset Runway Waypoints" button.
  
  
  
• AUTOLANDING
  
  1. Flip the Flight Director switch
  2. Make sure that the AUTOPILOT DISCONNECT switch is off
  3. Engage the "Approach Mode" by pressing the relevant button
  4. Press the "Auto-Land" button
  5. Press the Autopilot 1 and Autopilot 2 buttons
  
  
  *Auto-land necessitates input from both autopilot modules
  *The landing gear does not extend automatically
  
  
  AUTOPILOT FLIGHTPLAN SETUP:
  
  
• ADDING WAYPOINTS
  
  1. Select a waypoint on the map
  2. Then go to the "Flight Plan-Autoland Coordinates" keypad
  3. Insert the waypoint into the keypad
  4. Press the "Add Flight Plan Waypoint" button
  
  You can review your Flight Plan on the Second page of the FMC
  YOU CAN LOAD UP TO 8 WAYPOINTS TO THE FLIGHT PLAN MAX
  
  
• FLYING THE FLIGHTPLAN
  
  1. Flip the Flight Director switch
  2. Verify that the AUTOPILOT DISCONNECT switch is off
  3. Press the NAV Hold button
  4. Engage the Autopilot 1 and/or Autopilot 2 button
  
  BE AWARE THE NAV HOLD DOES NOT TURN OFF AFTER REACHING
  THE LAST WAYPOINT
  
  To reset the flightplan press the "Reset Flight Plan" button.
  
  
• ALTITUDE & HEADING HOLD SETUP:
  1. Adjust the Altitude and/or Heading using the adjust buttons
  2. Engage the Flight Director switch
  3. Ensure the AUTOPILOT DISCONNECT switch is off
  4. Press the ALT Hold and/or HDG Hold buttons
  5. Press Autopilot 1 and/or Autopilot 2 button

Special Thanks to @Vertical and everyone that helped with the development of the 777!

Artificial Horizon by: Lion Craft
https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=2374729163 : Modified HSI by Hally
https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=1799889445 : Modified 3D Maps by Buunuu
https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=2028815133 : Coms by PenguinO