Subscribe to download
Double Click Switch

Find Double Click Switch in the item assembly to use

A simple double-click toggle circuit, typically used when using a periscope to generate a pulse signal to operate a specific component or device by double-clicking, without affecting the signal from a click or long press.

The principle is to use the delay component to convert each click into a pulse signal, while input to or component and relay toggle_state and signal 1, or component output wire to relay set_state and use time farmer set to no output signal after receive any signal within 0.2 seconds(no control of the relay), and output 0 when no receive any signal (turn off the relay), in this 0.2 seconds the first click will turn on the relay, the second click will be a pulse signal through the relay, 0.2 seconds later the or component will turn off the relay to form a cycle.

The following are 2 examples of the use of this circuit.

The "Relic" drone

Camera switching system