Subscribe to download
XPIT | UH-60 MK.2

In my opinion the most reliable helicopter, No systems will fail you here and this will get your job done.

------------------------------------------------------------------------------------------------------

Checklist:

PRE ENGINE

1. Start both "Bat 1, Bat 2"

2. Turn the "GYRO" key to "On"

3. Hold "Avionics Saftey" and switch on the "Avionics"

4. Check Rotor brake set to "On"

5. Navigation lights "On"

6. All Hydrolics "On"

7. Engine Fuel "On"

8. Engine Master 1 & 2 "On"

9. Engine Run 1 & 2 "On"

10. Set Throttle to H for Normal Flights and L for Lifting or Heavy Flights

11. Once RPM (On far right screen) reach 2000 Hold Rotor Brake Saftey and Switch Rotorbrake to "Off"

---

-Fuel: 9400 Liter (Jet)
-Top Speed: 250 KM/H
-Seats: 9
-Connectors: Rope anchors for landing on ships and windy places
-Equipment: 1x Fire Extinguisher, 3x Welding, 8x Medkit, 1x Hose, 1x Cable

------------------------------------------------------------------------------------------------------

For more experienced pilots you can fly without the gyro, This is in my opinion the best helicopter to fly without gyro, But always keep and eye and dont get distraced. Even for the best pilots i recommend enable gyro when landing in tricky places.


Map (3D) - Buunuu (Modifed)

ECAM (Heavily modified) - Hunter Falkner

Transponder Triangulator - Zizo

Flight info Screen - Bumblemert

HUD - Markers622

Radar Projection Map - Yu_Oshida

Radio - PenguinO

Proccessing Screen - Buunuu (Modifed)

Heart rate screen - BermudaRayo

Compass Diplay 1x1 - Surativefire

---