Subscribe to download
"HARM" Passive Homing Missile (New Direction Screen)

RADIO HOMING GUIDANCE TUTORIAL: https://youtu.be/cr0ViwK8tOc

Look at the Paintable Signs for instructions on how to use!

THIS IS NOW FIXED HITS TARGETS PERFECTLY UP TO 10KM AWAY! (+/- 3KM Min distance)

NEW RADIO LOCK BUZZER: Buzzer gives a beep signal when the missile is ready to launch, the faster the beep, the better the lock (higher signal strength)

This missile now has a much smoother launch sequence, using updown counters to slowly start the guidance instead of jumping on after 3 seconds.

NOW HAS FREQUENCY WHITELIST SYSTEM AND A MULTIFUNCTION KEYPAD

Whitelist system is very similar to my Revela Jammer system's, by putting a value (not 0) in the keypad will allow you to add the value if it isnt present or remove it if it already is.

The multifunction keypad uses the instrument panel to switch the screens (with screen switch) and set what value the keypad will alter, it works as follows:

If the Startpoint button is pressed it will then change the value to whatever it is set to on the keypad, if you change what value you want to change to set search range it will save the last keypad value in the startpoint and will not change the search range untill a new keypad value is put in (or if the search range button is held for more than a second, pressing for less does not instantly set the keypad value)

NOTE THAT THIS APPLIES FOR ALL 3 OF THE VALUES TO CHANGE


Missile Dimensions: 3x3x19

The HARM missile is a High-speed Anti Radiation Missile (Radiation being Radio), with a max speed of +/- Mach 1 allowing for fast strikes on comms units!

To launch this missile you need my Targeting system mc (on the build) in order to scan frequencies and lock them to the missile.
NOTE: YOU CANNOT CHANGE LOCKED FREQ AFTER LAUNCH

The "HARM OS" UI i made shows 3 controls "S" being "Scan", "A" being "Arm", and "R" being "Reset".

Scan turns the scanner on and off, you need this to find frequencies but you can turn it off once a frequency is "Locked"
NOTE: YOU CAN ONLY "LOCK" 1 FREQUENCY AT A TIME

Arm sends the "Locked" frequency to the missile (if you have multiple harms its good to use a pylon selector system in order to set/reset specific missiles.

Reset sets the locked freq and missile freq to 0


Their are 4 different messaged given below the controls:

-OFF means well, off

-SEARCH means the scanner is on but their is no locked frequency.

-LOCK means a frequency is locked, but not set on the missile
(will only show lock if their is a signal on the frequency locked)

-READY means the missile has the locked frequency set and is ready to launch, happy war crimes!

Leave a comment if you like it!