Subscribe to download
ENDAIR A321-200 [Extreme Realism] [Aegean Livery]

The ENDAIR A321-200 is a medium haul passenger aircraft developed by EPVIN Aviation Company
Features Autoland , Storm-link, Failure simulation and a [Extreme Realism] cockpit and procedures!

For those looking for more realism this aircraft has its own complete MANUAL you can download here: https://drive.google.com/file/d/16DihTt9lJaVO5A43-7PvWBChcgLP3fST/view?usp=sharing

It features 3 different classes!
The configuration First Class is 1-1 Which also features fully factional entertainment system!
In business class its 2-2 ,And in economy its 3-3 that makes a total of 96 seats!


Get the latest updates about my projects on discord! : https://discord.gg/8YrrV9YJHM
You can support me by joining my Patreon! : https://www.patreon.com/EnderPilot
You can also join me on My Twitch Channel! : https://www.twitch.tv/enderpilot

[Requires modded workbench or custom mission to spawn]

• Analog and Digital Artificial horizon
  
• EICAS Monitoring systems
  
• INFO Diagram
  
• Map
  
• 5 LOWER ECAM Pages
  
• Radio commutation for both pilots
  
• Autopilot, Altitude hold, Roll stabilization Autoland
  
• extendable-retractable Landing gear , Flaps, Speedbrakes
  
• Take-Give control to Captain or First Officer
  
• Fly-By-Wire safety system [Like a real airbus]
  
• Evacuation Mode
  
• Fire suppression systems
  
• 3 simulated hydraulic systems
  
• Cabin light and heating controls
  
• Nav, Strobe, Landing, Taxi and beacon lights
  
• Seatbelt and No Smoking Panel and warning
  
• Reverse thrust
  
• Failures panel
  
  
  
  HOW TO GET IN:
  Go to any of the doors press the button below the window to open them then jump to the visible handle and bring your self up
  
  OR
  
  Use the "Home" Button on your keyboard and no-clip your self in!
  
  
  
  
  STARTUP PROCEDURE:
  
  
• You can read the startup instructions from here
  OR
  For more realism you download the AOM
  
  1. Open Both Battery switches
  2. Turn External Power ON if Available
  3. Perform Fire Agent Test
  >APU START
  4. Turn on APU SW Master
  5. Turn on APU Start
  6. Turn on APU Generator
  
  7. Check Parking brake on
  8. Check Flaps Retracted
  9. Turn on APU Bleed
  10. Turn on X-Bleed
  11. Turn on Crew Supply Oxygen
  12. Turn on Cockpit VR GND CTL
  13. Press untill audible chime CVR Test
  14. Turn on ADIRS 1,2,3 In order
  15. Open Strobe Lights
  16. Open NAV lights
  17. Check LDG Elevation on auto
  18. Turn on ENG 1 & 2 Generators
  19. Turn on all fuel pumps
  20. Turn on all Hydraulic Pumps
  21. Check PTU is on Auto
  >ECAM CHECK
  22. Check Hydraulic ECAM that valves are on and have operating preasure
  23. Check Fuel ECAM that Fuel Pumps are open
  24. Check DOOR ECAM that all doors are closed an secure
  >ENGINE START
  25. turn on Beacon Lights
  26. Switch ENG Mode selector to IGN Start
  27. Flip ENG 2 Master Switch
  28. Wait for Stabilization
  29. Repeat for ENG 1
  30. Flip ENG Mode selector to Normal
  31. After Takeoff turn off APU
  
  
  
  AUTOLAND SETUP:
  
  Tip Take a moment before takeoff to input your desired coordinates and Altitude to the aircraft!
  
  *ADDING RUNWAY WAYPOINTS
  
  1. Set a waypointon the START of the desired runway
  2. Then go to the "Flight Plan-Autoland Coordinates" keypad
  and insert the waypointinto the keypad
  3. Press the "Add The STARTOf The Runway" button
  
  4. Set a waypointon the END of the desired runway
  5. Then go to the "Flight Plan-Autoland Coordinates" keypad
  and insert the waypointinto the keypad
  6. Press the "Add The END Of The Runway" button
  
  *To reset the AutolandWaypointspress the
  "Reset Runway Waypoints" button.
  
  
  *AUTOLANDING
  
  1. Flip the FLIGHT DIRECTOR Switch
  1. Flip the LS Switch
  2. Press the "Auto-Land" button
  3. Press AP1 and/or AP2 button
  
  *BE AWARE THE GEAR DOES NOT DEPLOY AUTOMATICALY
  
  
  
  AUTOPILOT FLIGHTPLAN SETUP:
  
  *ADDING WAYPOINTS
  
  1. Select a waypointon the map
  2. Then go to the "Flight Plan-Autoland Coordinates" keypad
  3. Insert the waypointinto the keypad
  4. Press the "Add Flight Plan Waypoint" button
  
  You can review your Flight Plan on the Second page of the MCDU
  *YOU CAN LOAD UP TO 8 WAYPOINTS TO THE FLIGHT PLAN MAX
  
  *FLYING THE FLIGHTPLAN
  
  1. Flip the FLIGHT DIRECTOR Switch
  2. Press the NAV HOLD button
  3. Press AP1 and/or AP2 button
  
  *BE AWARE THE NAV HOLD DOES NOT TURN OFF AFTER REACHING
  THE LAST WAYPOINT
  
  *RESETING THE FLIGHTPLAN
  
  To reset the flightplan pressthe "Reset Flight Plan" button.
  
  
  ALTITUDE SETUP:
  1. Set up your desired Altitude on the Altitude Hold Panel
  2. Press the ALT HOLD Button
  3. Enable FD
  4. Enable AP
  
  url=https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=2392851331]

[/url]
CAPACITY: 94 Passengers



https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=2374729163 : HSI by Hally

https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=2092441495 : Modified AH by markers622
https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=2229865932 : Inspiration for the AH from Enzocats

https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=1799889445 : 3D Maps by Buunuu

https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=2028815133 : Coms by PenguinO