Subscribe to download
DAC FlyByWire Module Mk 5b

DAC Mk 5 Flight Computer
------------------------------
Sophisticated system for processing of inputs and flight parameters. DOES NOT INCLUDE RUDDER CONTROL
------------------------------
Functions:

Converts WASD inputs to adjustable smart engine outputs

Maintains level flight automatically when aircraft remains within 15 degrees of level

Maintains altitude if set

Secondary surface output - Roll is outputted through both the ailerons and elevators, with the elevators having half the deflection. Opposite effect with pitch

Additional functions may be added via add on modules
-----------------------------
Installation:
1. Weld to plane
2. Connect green WS block (pitch) and white AD block (roll) to seat
3. Connect switch to red logic gate (optional) (altitude maintenance toggle)
4. Connect smart engines to control surfaces (front left engine - left roll, rear left engine - left elevator etc)
----------------------------
Adjustment:
Canard mode - for aircraft with delta canard configurations or similar, the canards are to be connected to the smart engines used for the elevators, and the gray memory block is to be set to -1

Purple memory block - Degrees of output (Set how many degrees control surfaces should move) Default 38
Blue memory block - Minimum possible deflection Default 0.15
Light red memory block - Aircraft max speed Default 1000
Dark Red memory block - Secondary surface divisor (How much to divide secondary output by - E.G. Roll=1, Ailerons=1, Elevators=.5) Default 2
Yellow memory block - Compensation divisor (How much to divide current angle before feeding to automatic attitude correction) Default 50
Teal memory block - Automatic correction shutoff angle Default 15
Light green memory block - Elevator trim Default 0
Dark green memory block - Trim shutoff angle (optional, disable by setting to >180 Default 80
Orange memory block - Altitude correction pitch cutoff Default 45

White and Brown memory blocks - Constants. DO NOT TOUCH