Subscribe to download
Multi-purpose dolphin

This vessel is designed to deliver, tow, put out fire and explore! !!!! W A R N I N G !!!!! The vessel has 3 engines, 1 pair of medium engines and 1 large engine all of them on the full of their power. The large engine installed only for the purpose of towing other ships or boats! If you run them together on full power, the nose will not stop looking up and eventually flip over and stop working.

The vessel is equipped with two medium winches in the back and a connector.
In the front you will find the water cannon and the search light.
There is a door leading to the engine room ( just to check it out).
2 medical beds, 6 passenger seats and the captain.
The refueling system is located in the front of the boat, opening a door from the inside.
There are a couple of sensors and some other instruments to look at.

The starting sequence:

1. Turn on the electrical switch on the top left side.
2. Turn on the coolant pumps so they can pump water into the engine and cool it down later when its on. (SUPER IMPORTANT)
3. Take up the throttle a bit by pressing "W" and press the starter (1 or 3).
4. As soon as the engine is on push the clutch throttle gently all the way.
5. if you want to reverse, push the clutch throttle back in the starting position , push the reverse button and again the clutch all the way gently.( works for both engines same time and individualy)
6. To turn off the engine take throttle all the way down and switch off the the electrical switch.

Hope you like my vessel, enjoy it and hopefully it will be helpful and fun to use! :)

Any comments are welcome!