Subscribe to download
ELB Rhino Mag All module

This is the Mag All module for the ELB Rhino MFV.

With this module you can lift small and medium sized objects for loading them into things, like the back of a helicopter.
The module might struggle if the object is really heavy, or a lot bigger than the mag plate.

Features:

* Magnets for picking up stuff, duh.
* the mag plate can be moved up and down.
* A lock system for making sure the mag plate doesn't sag down under heavy loads.

Buttons:

Inside the ELB Rhino there is a controlpanel o the right side inside the cabin. Here you will find eight buttons.
Here are the button labels, and what they do with this module connected:

* Arrow up 1: moves the mag plate up.
* Arrow up 2: Moves the mag plate down.
* Button 1: Activates the magnets on the mag plate.
* Button 2: Locks the mag plate in place. (Plate can still be moved up and down with this on)

How to connect the module:

Video coming soon.

Approach the module from the back, and line it up with the port on the Rhino. Slowly drive towards it until it snaps into place. Now press the button labeled "release" on the right side of the cabin, then carefully drive forwards. The module should then snap into place again, correctly this time. When it has snapped into place correctly, press the button labeled "small connector". It should now be connected. If you have problems connecting the module, write in the comments, and I will do my best to help.

You might have noticed that a button labeled "Center lock rotation" just lit up. This is because this module does not support rotation of the Rhino. Disengage this lock at your own risk.

Disconnecting the module:

Simply press the button labeled "release" and back up. The module should stand on it's own. Make sure the mag pad is resting on the ground before disconnecting.

If you have ANY questions about how to use this module, please tell me in the comments, and I will answer as good as I can.