Subscribe to download
AISC-3216 "Beast"

The AISC-3216 “beast” is a super heavy lift sky crane made by Ace Industries. The Beast Has a max tested lifting strength of 1,000,000 mass and a top speed of 67 m/s. The beast trades strength over ease of use yet it is still an extremely stable aircraft to fly. Please read the included instructions on how to fly, connect a module, and how to make your own. it can be used without a module if you want. the modules are for different missions. If you find anything that needs to be fixed or should be changed, don't hesitate to leave it in the comments. And don't forget to rate.

The arctic Beast https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=1678491801

If you lift anything crazy, post a picture on the stormworks discord showcase with me mentioned. I would love to see it

Donkk Tested, Donkk approved

Contributors
Lil Peep [Carina] : Helped with initial logic
Herr Einstein: helped with fixing the lighting
Utopian: helped with touching up the paint

Testers
Donkk, Imagine Wagons, Daylight, Lonelyforlife, Thomas_nl_, Rowan, Nhalok

Thank you to all the people who helped test my creation and make sure it worked well.

Flight instructions
Be gentle with it. Without mass, it moves extremely fast and requires fine movements. It will take time to get used to flying. Give it time to take off, don’t keep holding down the up arrow as you will go way past where you want. if your aircraft doesn't take off after landing, toggle the alt hold when the set altitude is slightly higher then your current altitude

1. Spawn and enter the vehicle
2. Sit in the seat
3. Read the cockpit instructions shown by the blocks
4. Click engine start and set throttle to 13 or the required throttle for your payloads mass
5. Push forwards to leave the hanger, highly recommended as it has a quick takeoff speed
6. Use up and down to change your altitude like your collective
7. Enjoy

Connecting a module
1. Complete steps 1-7 of the flight instructions
2. Move the desired module out of the hanger
3. Turn on the magnets on the module using the button on the said module
4. Move the aircraft over the module making sure the magnets line up
5. Turn on the center magnet then lower the magnet using the buttons near the jump seat
6. Raise the magnet and turn on the outer magnets to raise and connect

Making your own module
If you would like to make your own, there is a sperate creation you can use, all you must do is build off what is given. Add anything you want and make it your own, once you made one, send it to me so I can add it to a list of creations for this.
base module starter: https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=1654028472

Links to user created modules:


You do not have permission to copy or repost my creation with modifications, any that are found will be removed. You are allowed to make modules for the crane and post them.