Subscribe to download
C&C Tomahawk w/ Battle Drone

Using a Crusader tank chassis coupled with advanced US missile design, it traveled only slightly slower than a tank, firing single Tomahawk missiles, and had a short reload time. Although used primarily against structures as a siege weapon, the missile was also quite capable of locking onto a moving target, and could be effective against tanks under the right circumstances. The chassis also enabled optional drone support. Though the Tomahawk launcher was developed for USA forces, Chinese General Leang also had access to it.

http://cnc.wikia.com/wiki/Tomahawk_launcher





First actual "decent" tank I built. Although it is not really as detailed as other people's tank creations but because to the lack of design I decided to up the power on the missile, and turns out that missile can shut down tanks, regardless of invincibility (if you try this, the blocks will collide in such a way that . . . rips the target tank and PC in half). This is due to an embedded cannon in the missle modded with 1,000,000 power, which should be impossible to dodge if direct hit.

This missle is medium ranged, as I designed the missle to cut its thrust after a certain amount of time, 2.5 seconds to be exact. It's sort of a balance to counter the already absurd power it carries.

Controls:

T/G/F/H to control missile

Z to launch missile





I/J/K/L to control drone

O to fire crossbolts on drone

, to retract drone

. to extend drone





[ ; ' \ to control turret (the keys to the right of IJKL)

Arrow Keys to drive tomahawk