Projection beacon needs added to the BlueprintClasses for Nanites group.

Also I seem to have hit a max target issue last night. I'm not sure what happened but I had a remote station projector setup 270m away from NCF and when I dropped the projection beacon on it only block frames were built. I added a repair beacon to the same grid and then it started bulding the blocks. I did my own thing for a while and came back and it was agin only setting frames and the repair beacons light was off but it still showed power on in the control. I removed it and re-added it then the ligtht was lit again and it built 3 more blocks then just stopped.

I was decon a large ship as well during all this with a decon beacon and had captured 2 more and added decon beacons to them as well. When I turned decon option off from the factory and the projector from the other grid all the NCF would do was say 567 construtction targets found 2 current targets and spooling up. The ball would float up all running purple hit the top then spool back down and repeat. It was only building armor at the time and I had 9.2mil steel plates. I had to grab a welder ship and go weld at least 3/4 of the set frames before the NCF took over again.

At one point when I removed the repair beacon I got an error of max targets reached unable to continue opperation in the nanite window info.