Cities: Skylines

Cities: Skylines

Traffic++
JCPhoenix 2015년 7월 25일 오후 4시 39분
Non-Busses using Bus Lane?
So I put in my first bus lane in an opposite direction along a 6-lane one-way road. Busses are indeed using it, which is nice. But I'm also seeing some cars, trucks, and delivery vans using it, too. What's up with that? Not a lot of them, but I thought bus lanes were literally only for busses.

You can see it here: http://gtm.steamproxy.vip/sharedfiles/filedetails/?id=488199113

I'm using the following mods: Traffic++, Precision Engineering, No More Purple (one mod for water, and another for ground), and American Roads. I was using Proper Hardness but have since turned it off.
< >
2개 댓글 중 1-2개 표시
voker57 2015년 10월 1일 오전 8시 49분 
Can reproduce it as well, without any mods except Traffic++.
unreified 2015년 12월 5일 오후 3시 03분 
I had a similar thing happen to me. The Traffic++ roads work by only allowing cars that belong to a certain category drive on them. You can use the lane changer to double check that it's working. Cars that are parking can disregard road rules if it takes too long to do a detour or drive to a different parking space; hence they will drive the wrong way on one way streets, use sidewalks, clip through buildings, disappear and use bus lanes. You can click on vehicles to find out what they are doing (parking, driving home, driving to work, etc...). I don't know why cars engage their "find a parking spot" code so early, or why the trucks are in the bus lanes.

Some ways you can fix this (that I used in my cities) are you could make your bus lanes separate from normal intersections/roads or make them slightly longer or slower than normal streets to prevent normal cars from using them. Hope this helped!

PS.
don't make your bus stops so close together. That defeats the whole point of busses
unreified 님이 마지막으로 수정; 2015년 12월 5일 오후 3시 04분
< >
2개 댓글 중 1-2개 표시
페이지당 표시 개수: 1530 50