Butikssida
Oxygen Not Included
Alla Diskussioner Skärmbilder Konst Sändningar Filmer Workshop Nyheter Guider Recensioner

Oxygen Not Included

Butikssida
Oxygen Not Included >  Workshop > Fumihikos workshop > Piped Everything > Diskussioner
Piped Everything
Beskrivning Diskussioner6 Kommentarer379 Ändringar
Sif 15 jun, 2024 @ 21:58
Oil well not pooping out oil
I came across a really weird and random bug where the oil well would stop pumping out crude oil, but it'd still pump out natural gas and consume water. I cant detect any real pattern. I have 3 wells and 2 of them randomly stopped producing oil.
< >
Visar 1-8 av 8 kommentarer
WhomstWee 17 jun, 2024 @ 12:54 
I've been having the same problem too, for me it seems to go away for a little while whenever I deconstruct it or when a duplicant releases the backpressure.
#1
Sif 17 jun, 2024 @ 19:06 
Its not a dealbreaker. Its just annoying. Anyone else know a workaround?
#2
ich VII 26 jun, 2024 @ 7:30 
Having the same issue. I dont know of a workaround, but it usually briefly works again after a reload. It still fails again after that. Stops my sour gas boiler from working :( So i havent tested it under full load, it might only break after the output gets blocked for a time.
#3
Sif 27 jun, 2024 @ 7:17 
My work around is having it output directly into a liquid reservoir then the reservoir go into the oil pipeline. It seems to work mostly okay since the reservoir get filled from the main pipe being full when everything works
#4
ClayMean 27 jun, 2024 @ 12:35 
Ursprungligen skrivet av Sif:
My work around is having it output directly into a liquid reservoir then the reservoir go into the oil pipeline. It seems to work mostly okay since the reservoir get filled from the main pipe being full when everything works
If it's the same issue I had, the problem is in building entering a "output is full" state. Workaround is to disable it with pipe content sensor when it gets full
#5
Sif 30 jun, 2024 @ 9:35 
Ursprungligen skrivet av ClayMean:
Ursprungligen skrivet av Sif:
My work around is having it output directly into a liquid reservoir then the reservoir go into the oil pipeline. It seems to work mostly okay since the reservoir get filled from the main pipe being full when everything works
If it's the same issue I had, the problem is in building entering a "output is full" state. Workaround is to disable it with pipe content sensor when it gets full
That sounds like it might be it
#6
Mordan 30 okt, 2024 @ 12:42 
I've got this issue too
#7
Fumihiko  [utvecklare] 30 okt, 2024 @ 12:58 
You can always goto the config file and remove the modifications that make you trouble. In this case look for "OilWellCap".
#8
< >
Visar 1-8 av 8 kommentarer
Per sida: 1530 50