A deployable VTOL mini rescue heli

Автор сообщения: Stormworker

A deployable VTOL mini rescue heli

I want to, but for now you can dock the minbus mk II to the bottom of the cabin.

Автор сообщения: ROBOTEY

maybe add a feature so when the autopilot reach the destination, the boost can turn off automatically

Do you mean like changing the selected option on the menu screen?

ad a heli pad in the middel with a refaul station

Автор сообщения: RBLXfreak14

ad a heli pad in the middel with a refaul station

I am working one with a larger roof to land on.

What would be awesome is a bottom docking port on the sub so I can travel to my underwater bases, cant find many subs working these days that have one

Also a camera pointing downwards on the bottom of the skylift would be good so I can position it better

winch gauge for the cranes so I know if ive maxed out the line

Автор сообщения: AxioM

What would be awesome is a bottom docking port on the sub so I can travel to my underwater bases, cant find many subs working these days that have one

Also a camera pointing downwards on the bottom of the skylift would be good so I can position it better

winch gauge for the cranes so I know if ive maxed out the line

The guage will be simple to add, camera still mostly simple. As for the bottom dock I will see what I can do.

can you please add an airlock to the minisub ?

I was working on that but it did not work very well because there are some bugs with selection grids breaking connectors.

Автор сообщения: IncendiaryMoose

Автор сообщения: Stormworker

A deployable VTOL mini rescue heli

I want to, but for now you can dock the minbus mk II to the bottom of the cabin.

So that's what the lift is for on the mini-bus!

Автор сообщения: IncendiaryMoose

I was working on that but it did not work very well because there are some bugs with selection grids breaking connectors.

Isn't there a way that you can edit the sub seperatly, then insert the whole thing in?

Автор сообщения: Axiom

What would be awesome is a bottom docking port on the sub so I can travel to my underwater bases, cant find many subs working these days that have one

Also a camera pointing downwards on the bottom of the skylift would be good so I can position it better

winch gauge for the cranes so I know if ive maxed out the line

By bottom dock, do you mean an airlock on the bottom of the sub?

Okay, here's an idea. For the landing gear, how about using skids? Then, have 2 varients. 1 of them is almost frictionless, to allow easy gliding out of the hanger, and the other one is higer friction (Or a wheel), with the idea of being used as movment. When you press the exchange button (Which could also be bound to the chair perhaps?), the one that is up is pushed down untill both gear are on the ground, then the oppisite goes back up. Then, you can always retract the gear, and when putting it out it defaults to the wheels (Higher friction). Then, once you taxi, for easier movment and turning, use the skids, then glide into the hanger, lowering the wheels to stop you. The final step are the storage gear wich are larger, and prop it up, removing it from both the wheels and the skids. When both the wheels and skids are retracted, a compartment hides them and then becomes water tight, and it's like they aren't there.

Here's another.

This one should be simpler (It could be integrated into the VTOL logic system)

An aultitude hold feature. That would make docking a whole lot easier!

It does have altitude hold, and position hold. When you let go of up/down, it stores the current altitude in a memory bit, and it will hold that until you change it with up/down. The same applies for position.

It will reset the position hold if it gets too far off to recover though.

So when you let go of the controls, it should hold position until it runs out of fuel, catches fire, etc.