Página de la tienda
American Truck Simulator
Todo Discusiones Capturas Artwork Retransmisiones Videos Workshop Noticias Guías Reseñas

American Truck Simulator

Página de la tienda
American Truck Simulator >  Workshop > Workshop de Harven > Mack R Series > Discusiones
Mack R Series
Descripción Discusiones24 Comentarios1976 Notas sobre cambios
 Este tema se ha marcado como fijo, por lo que probablemente sea importante
Fury6 2 SEP 2018 a las 4:26 a. m.
Shifter layouts for the Mack 10 & 12 speed gearboxes, incl. the 5 reverse speeds.
Here you go, just cut & paste into a plain text file (as named below) into your profile directory (or - use this Google Drive[drive.google.com] link to my prebuilt layout files.
--

These are 'profile level' files, they need to be located in the relevant profile folder as per:
"%USERPROFILE%\documents\american truck simulator\profiles\<profileID>\"
--

These boxes are a basic 5 speed pattern with splitter on each gear (direct & high), 1st gear is at left & down (3rd slot), 2nd gear is at mid & up, 3rd gear is at mid & down, 4th is at right & up, 5th is at right & down. Reverse gears are the same, except as noted below for the 12 speed box.
--

12 speed:
Range - DOWN; run the gears from 1st to 5th using the splitter to flip between Direct & High in each gear.

Range - UP; Low & Low-Low at 1st gear position (left & down), switched with splitter. Reverse gears in remaining slots with 1st gear reverse in left & up position instead of the 1st gear position as is the real box (there's just no way to make 1st reverse work in the 1st gear slot and still have both the low forwards there). Reverse gears do not split.
--

FILE: gearbox_layout_mack_12.sii
SiiNunit { /* Mack shift pattern configuration for 12 speed Maxitorque. -fury6 */ direct_gearbox_config: .MaxiTorque.12 { name: "MaxiTorque 12 @@speeds@@" clutch_mode: analog selector_mode: range_split gears[]: .neutral.n gears[]: .reverse.1 gears[]: .reverse.2 gears[]: .reverse.3 gears[]: .reverse.4 gears[]: .reverse.5 gears[]: .forward.ll gears[]: .forward.lo gears[]: .forward.1d gears[]: .forward.1h gears[]: .forward.2d gears[]: .forward.2h gears[]: .forward.3d gears[]: .forward.3h gears[]: .forward.4d gears[]: .forward.4h gears[]: .forward.5d gears[]: .forward.5h } direct_gearbox_gear: .neutral.n { gear_impulse_index: 0 selector_1: -1 # Range [2nd Shifter; Deep Reduction] (0 = Direct; 1 = Low) selector_2: -1 # Split (0 = Direct; 1 = High) gear: 0 name: "N" } direct_gearbox_gear: .reverse.1 { gear_impulse_index: 2 selector_1: 1 selector_2: 0 gear: -1 name: "R1" } direct_gearbox_gear: .reverse.2 { gear_impulse_index: 4 selector_1: 1 selector_2: 0 gear: -2 name: "R2" } direct_gearbox_gear: .reverse.3 { gear_impulse_index: 5 selector_1: 1 selector_2: 0 gear: -3 name: "R3" } direct_gearbox_gear: .reverse.4 { gear_impulse_index: 6 selector_1: 1 selector_2: 0 gear: -4 name: "R4" } direct_gearbox_gear: .reverse.5 { gear_impulse_index: 7 selector_1: 1 selector_2: 0 gear: -5 name: "R5" } direct_gearbox_gear: .forward.ll { gear_impulse_index: 3 selector_1: 1 selector_2: 0 gear: 1 name: "LL" } direct_gearbox_gear: .forward.lo { gear_impulse_index: 3 selector_1: 1 selector_2: 1 gear: 2 name: "Lo" } direct_gearbox_gear: .forward.1d { gear_impulse_index: 3 selector_1: 0 selector_2: 0 gear: 3 name: "1D" } direct_gearbox_gear: .forward.1h { gear_impulse_index: 3 selector_1: 0 selector_2: 1 gear: 4 name: "1H" } direct_gearbox_gear: .forward.2d { gear_impulse_index: 4 selector_1: 0 selector_2: 0 gear: 5 name: "2D" } direct_gearbox_gear: .forward.2h { gear_impulse_index: 4 selector_1: 0 selector_2: 1 gear: 6 name: "2H" } direct_gearbox_gear: .forward.3d { gear_impulse_index: 5 selector_1: 0 selector_2: 0 gear: 7 name: "3D" } direct_gearbox_gear: .forward.3h { gear_impulse_index: 5 selector_1: 0 selector_2: 1 gear: 8 name: "3H" } direct_gearbox_gear: .forward.4d { gear_impulse_index: 6 selector_1: 0 selector_2: 0 gear: 9 name: "4D" } direct_gearbox_gear: .forward.4h { gear_impulse_index: 6 selector_1: 0 selector_2: 1 gear: 10 name: "4H" } direct_gearbox_gear: .forward.5d { gear_impulse_index: 7 selector_1: 0 selector_2: 0 gear: 11 name: "5D" } direct_gearbox_gear: .forward.5h { gear_impulse_index: 7 selector_1: 0 selector_2: 1 gear: 12 name: "5H" } }
--

10 speed:
Same as 12 speed except there is no 2nd shifter (so no deep reduction/crawler gears). 1st gear reverse is now in the correct slot at left & down.

FILE: gearbox_layout_mack_10.sii
SiiNunit { /* Mack shift pattern configuration for 10 speed Maxitorque. -fury6 */ direct_gearbox_config: .MaxiTorque.10 { name: "MaxiTorque 10 @@speeds@@" clutch_mode: analog selector_mode: range_split gears[]: .neutral.n gears[]: .reverse.1 gears[]: .reverse.2 gears[]: .reverse.3 gears[]: .reverse.4 gears[]: .reverse.5 gears[]: .forward.1d gears[]: .forward.1h gears[]: .forward.2d gears[]: .forward.2h gears[]: .forward.3d gears[]: .forward.3h gears[]: .forward.4d gears[]: .forward.4h gears[]: .forward.5d gears[]: .forward.5h } direct_gearbox_gear: .neutral.n { gear_impulse_index: 0 selector_1: -1 # Range [2nd Shifter; Deep Reduction] (0 = Direct; 1 = Low) selector_2: -1 # Split (0 = Direct; 1 = High) gear: 0 name: "N" } direct_gearbox_gear: .reverse.1 { gear_impulse_index: 3 selector_1: 1 selector_2: 0 gear: -1 name: "R1" } direct_gearbox_gear: .reverse.2 { gear_impulse_index: 4 selector_1: 1 selector_2: 0 gear: -2 name: "R2" } direct_gearbox_gear: .reverse.3 { gear_impulse_index: 5 selector_1: 1 selector_2: 0 gear: -3 name: "R3" } direct_gearbox_gear: .reverse.4 { gear_impulse_index: 6 selector_1: 1 selector_2: 0 gear: -4 name: "R4" } direct_gearbox_gear: .reverse.5 { gear_impulse_index: 7 selector_1: 1 selector_2: 0 gear: -5 name: "R5" } direct_gearbox_gear: .forward.1d { gear_impulse_index: 3 selector_1: 0 selector_2: 0 gear: 3 name: "1D" } direct_gearbox_gear: .forward.1h { gear_impulse_index: 3 selector_1: 0 selector_2: 1 gear: 4 name: "1H" } direct_gearbox_gear: .forward.2d { gear_impulse_index: 4 selector_1: 0 selector_2: 0 gear: 5 name: "2D" } direct_gearbox_gear: .forward.2h { gear_impulse_index: 4 selector_1: 0 selector_2: 1 gear: 6 name: "2H" } direct_gearbox_gear: .forward.3d { gear_impulse_index: 5 selector_1: 0 selector_2: 0 gear: 7 name: "3D" } direct_gearbox_gear: .forward.3h { gear_impulse_index: 5 selector_1: 0 selector_2: 1 gear: 8 name: "3H" } direct_gearbox_gear: .forward.4d { gear_impulse_index: 6 selector_1: 0 selector_2: 0 gear: 9 name: "4D" } direct_gearbox_gear: .forward.4h { gear_impulse_index: 6 selector_1: 0 selector_2: 1 gear: 10 name: "4H" } direct_gearbox_gear: .forward.5d { gear_impulse_index: 7 selector_1: 0 selector_2: 0 gear: 11 name: "5D" } direct_gearbox_gear: .forward.5h { gear_impulse_index: 7 selector_1: 0 selector_2: 1 gear: 12 name: "5H" } }
--

NOTE that unlike the real box, due to the way the range switch works, you can't be in the 1st gear position and flip the range switch to get into low, the shifter must be in (or pass through) neutral before it can engage into low (or disengage from low).

[NOTE 10/12/2018]
Updated for v1.33 compatibility.
Última edición por Fury6; 25 JUL 2020 a las 12:09 p. m.
< >
Mostrando 1-15 de 19 comentarios
Fury6 3 SEP 2018 a las 3:41 p. m. 
My thanks to Harven, Pauli, Lucasi & Kriechbaum for this great truck mod.
#1
Wulfkai 3 OCT 2018 a las 2:45 p. m. 
awesome fury6! pure awesomeness!
#2
Jack Burton 11 OCT 2018 a las 4:58 p. m. 
Thank you @fury6! These layouts are perfect.
#3
Fury6 23 OCT 2018 a las 2:18 a. m. 
You're welcome guys, keep that old dog barkin'!
#4
YOGI 12 NOV 2018 a las 12:51 p. m. 
WELL DONE Fury! KUDOS to ya DUDE!
#5
YOGI 12 NOV 2018 a las 12:53 p. m. 
some of the KIDS like using the gears.but this Old Retired trucker prefers the "Allison Automatic ♥♥♥♥♥♥" as he got older..(and in the game too(sigh)...to FULLA arthritis I in the arms/wrists maybe I figure?:steamsad:
#6
Serialblack 24 DIC 2018 a las 8:04 p. m. 
what was needed to be done for 1.33 compatibility? I've been working one a spicer layout, but it always comes up as "splitter" in the drop down menu.....not sure what I'm doing wrong, as it worked up to 1.32.
Última edición por Serialblack; 24 DIC 2018 a las 8:04 p. m.
#7
Serialblack 24 DIC 2018 a las 8:17 p. m. 
update:

It seems to be doing the same with your version as well, unless I'm just really dumb and missing something silly....
https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=1601340215
#8
Fury6 25 DIC 2018 a las 5:40 a. m. 
SCS changed the unit name parsing in the layouts and I had to change my gear unit names to suit. Previously, a trailing '.' would be parsed as an implicit terminating identifier (of value '0') whereas now it's rejected as a misformed name.

I have no idea why gear unit names are suddenly being scrutinised this way - and the inconsistency is driving me nuts, but anyway.

--
The updated layouts above are working as normal.
#9
Serialblack 25 DIC 2018 a las 11:59 p. m. 
ok I got it thanks. I've done a variant for the 6 speed with 5 reverse as well, essentially using a normal 6 speed, then flip the range for the 5 reverse, starting at lower left. The spicer was a bit more....finicky lol.
#10
psx 10 JUL 2020 a las 12:20 p. m. 
pls, add mod compatibly v1.38 . i need it!!!
#11
gerversluis 25 JUL 2020 a las 10:35 a. m. 
In the 10 speed file you need to remove the trailing . from the line: direct_gearbox_gear: .forward.3h.
very nice layouts!
#12
Fury6 25 JUL 2020 a las 12:13 p. m. 
D'oh! how'd that get there!?

Fixed, and thanks :)
#13
psx 25 JUL 2020 a las 12:45 p. m. 
yep:steamhappy:
#14
Andrew 8 MAY 2021 a las 10:55 p. m. 
Publicado originalmente por Serialblack:
ok I got it thanks. I've done a variant for the 6 speed with 5 reverse as well, essentially using a normal 6 speed, then flip the range for the 5 reverse, starting at lower left. The spicer was a bit more....finicky lol.
Do you still have that file Serial?
#15
< >
Mostrando 1-15 de 19 comentarios
Por página: 1530 50