Kauppasivu
Garry's Mod
Kaikki Keskustelut Kuvakaappaukset Taideteokset Suoratoistot Videot Workshop Uutiset Oppaat Arvostelut

Garry's Mod

Kauppasivu
Garry's Mod >  Workshop > Käyttäjän minifisch.at Workshop > SmartSnap > Keskustelut
SmartSnap
Kuvaus Keskustelut31 Kommentit556 Muutokset
Spirit Technician 23.4.2016 klo 17.09
Grid Visible, But No Snapping
When I attempt to attach a tool to a prop, the tool does not snap to grid intersection points.

Example: I walk up to an explosive barrel, and see a 2x2 grid on its top. I pull out my tool gun to attach a hoverball, and shoot -- sadly, the hoverball is off center, somewhere inside one of the grid squares.

Thanks, developers, if any explanation or fix can be found.
< >
Näytetään 1-1 / 1 kommentista
Spirit Technician 23.4.2016 klo 17.15 
SOLUTION: One must press the use key [e by default] to lock on to the grid point desired.

Example: I walk up to my old explosive barrel again, and again see the 2x2 grid on its top. I pull out my tool gun to attach a hoverball, but instead of shooting, I press the use key [e]. It seems I was too close to the barrel, as I accidently pick up the barrel in my hands. I set the barrel down again by pressing my use key, and take a few steps back. I again view the 2x2 grid on the top of the barrel, and press my use key when I see a small red x appear in the center. The small x turns green, and I shoot -- absolute precision! The hoverball is directly in the center of the barrel's top.
#1
< >
Näytetään 1-1 / 1 kommentista
Sivua kohden: 1530 50