Subscribe to download
Power Display and Manager (Obsolete)

This script will display all Solar Panels, Batteries and Reactors to one or more displays.

Solar Panels that will be tracked will be the same size as the Grid the Programmable Block is on. This is to keep the script from getting confused by the different maximum outputs in the small and large grid Solar Panels, while allowing you to have your panels on pistons and rotors just in case you are running a Alignment script.

The Batteries and Reactors are tracked on the same Grid, as in not through Rotors, Pistons or Connectors.

Reactors are managed by keeping them off unless the average of all batteries are less than 10% stored power or Battery output is over 90%.

Don't have batteries? I thought of that and the reactors stay on if you dont have any.

Want fancy lights so you can tell how efficiently your solars are capturing sun light? This script will change a set of lights to a green color if solars are 90% of their maximum generation, yellow below 90% and above 10%, red and flashing below 10%.

1. Place a Programmable block.
2. Load this script from the workshop tab.
3. Place a LCD Panel.
4. Name that LCD Panel: LCD Power

OPTIONAL:
1. Place any kind of light.
2. Name the light: Solar Lights

Special Thanks to MMaster for the large number converter.