Cities: Skylines

Cities: Skylines

113 arvostelua
Warren style truss bridge Fixed!
   
Palkinto
Lisää suosikkeihin
Lisätty suosikkeihin
Poista suosikeista
Tiedostokoko
Julkaistu
Päivitetty
2.803 MB
14.8.2016 klo 6.03
7.12.2016 klo 4.54
2 muutosilmoitusta ( näytä )

Tilaa ladataksesi
Warren style truss bridge Fixed!

1 kokoelmassa, tekijä Jerenable
Jerenable's Bridges
17 luomusta
Kuvaus
Warren style truss bridge by Jerenable

You can find this bridge under the electricity tab. without a anarchy mod this bridge is only placeble on water thats why I recommended the angle mod.

stats:
main: 2896 + 544 triss
texture: 1024^2 + 512^2
lod: 592 + 168 triss
texture: 128^2 + 64^2

Dont forget to upvote if you like the building!!
28 kommenttia
+TheRedBaron097+ 2.11.2023 klo 14.41 
So author was given the way to fix the ground issue and refused. Thank you Graphdiyne for the fix.
PinkFazbearCub 11.1.2020 klo 16.52 
Its a nice bridge, just the terrian gets wack after placing it down... There a way to fix the bridge?
projectamberly 9.12.2019 klo 13.39 
Sharp Junction Angles is incompatible, and I am not sure if it works.
Jerenable  [tekijä] 3.6.2019 klo 23.21 
I'd rather not have you upload it, your free to have local edit s though.
Graphdiyne 3.6.2019 klo 18.38 
For those who have the terrian problem, you can open asset editor, load this birgde and uncheck 'flatten terrain' option. @Jerenable May I upload the fixed version if you are not going to update it over here?
saintkhawnan 26.1.2018 klo 7.10 
Beautiful! Thanks for all your hard work on this! Blessings to you!
superxiaoduo 31.8.2017 klo 23.55 
How to build road on these mod?
Bosh9 10.2.2017 klo 12.22 
Last update seemed to cause this bridge to flatten the riverscape below it.
Khaist 13.12.2016 klo 16.18 
Ok, it seems that the flatten terrain option is aktivated at this bridge, i got the same issue when i build the bridge on a hilly part of the land, tha the terrain is flattened between the pillars
Khaist 12.12.2016 klo 16.03 
The bridge now works in the game without an error, but i had some problem when placing the bridge on the water, that de space between the two pillars is filled with ground that ich can't remove with the terraforming tools..., i probably do some further testing tomorrow if it is related to a mod or someting else...