Mağaza Sayfası
Scrap Mechanic
Tümü Tartışmalar Ekran Görüntüleri Çizimler Yayınlar Videolar Atölye Haberler Rehberler İncelemeler

Scrap Mechanic

Mağaza Sayfası
Scrap Mechanic >  Atölye > PiffPaff Kullanıcısının Atölyesi
25 oy
Elevator automation , 2-6 floors , callfunction , lift
Açıklama Tartışmalar0 Yorumlar11 Değişiklik Notları
   
Ödül
Favorilere Ekle
Favorilere Eklendi
Favorilerden Çıkar
Blueprint
Dosya Boyutu
Gönderilme
Güncellenme
86.642 KB
18 Tem 2016 @ 0:46
18 Tem 2016 @ 3:44
2 Değişiklik Notu ( görüntüle )
Oluşturan
PiffPaff
Çevrimdışı
PiffPaff ve diğer kişiler tarafından oluşturulmuş 61 koleksiyona göz atın (bazıları gizli olabilir)
2,955 Tekil Ziyaretçi
4,388 Mevcut Abone
26 Mevcut Favoriler

İndirmek için abone ol
Elevator automation , 2-6 floors , callfunction , lift

PiffPaff tarafından 1 koleksiyonda
Elevators Collection
5 öğe
Açıklama
This is the small version of my elevator automation. With this you can easily build a 2-6 floor elevator with callfunction.

You can connect any cabine and up to 5 motors to this automation as well as 2x6 call-buttons.

NEW!: Reset Switch -> Reset all motors (so you can handle errors when you dont connect proper or when you berserked the callbuttons)

** Call the automation to the basement before your weld it to the floor! (otherwise some bearings can mess up) **


grey motor: floor 1-2
yellow motor: floor 2-3
green motor: floor 3-4
blue motor: floor 4-5
red motor: floor 5-6


>>> Check the big version of this module to get a better understanding of the mechanism: http://gtm.steamproxy.vip/sharedfiles/filedetails/?id=726287470 <<<

11 Yorum
< >
OlePunktExe 21 Ağu 2016 @ 4:51 
danke
PiffPaff  [yaratıcı] 20 Ağu 2016 @ 23:49 
@ole.abendroth 1. Lade es auf den Lift - 2-. Entferne den Lift - 3. Drück den Reset-Switch an der Automation - 4. Verbinde die Automation durch Schweissen mit dem Boden. 5. Schliesse die Rufknöpfe und Motoren gem. Bildern oben an - have fun;)
OlePunktExe 19 Ağu 2016 @ 13:55 
wie kriege ich das zum laufen?
Creasu 16 Ağu 2016 @ 2:59 
i like this
SrDaMagia 3 Ağu 2016 @ 14:29 
@doublegulptank I wasn't being ironical, I was afirming that this creation is genial, I've made myself clear now?
PiffPaff  [yaratıcı] 3 Ağu 2016 @ 1:25 
want to say thanks to you folks for nice 2+k subs!
PiffPaff  [yaratıcı] 3 Ağu 2016 @ 1:24 
@ramshaw 1. spawn it on the lift - 2. remove lift - 3. reset the automation - 4. weld it to the ground - 5. connect it properly (like in the pics) [basicly it works on its own, you don't have to get it work;) ]
Ramshaw 2 Ağu 2016 @ 12:56 
i cant get this bloody thing to work
b0oM H3AD5HOTXD 24 Tem 2016 @ 20:08 
@SrDaMagia it's a computer for when you want to build a complex elevator in a building. You weld it to the floor.
SrDaMagia 20 Tem 2016 @ 19:59 
No comments, anything that I write here does not describes the geniality of this creation.