Klikněte na „Odebírat“ pro stažení položky
[RF] Storm Drain Inlet

Storm Drain Inlet by [SSU]yenyang

Rainfall
Decal Prop Fix
Small Decal Drains

The new props can be difficult to see with certain pavement colors I recommend
Roads United: Core+ and altering the brightness of the pavement so that you can see the decals. I thought these decals where an improvement over the old props because the decals follow the surface of the road rather than hovering over it. Anarchy is recommended for placing on top of roads but The Move It! mod with Snapping options allows for inlets to be perfectly snapped onto roads. That method does not require anarchy.

Collects storm water. Requires gravity flow to outlet. Does not require nor conduct electricity.

Inlet Capacity: 1875 units
Cost: 250
Upkeep: 1.92/week
Electricity: 0 KW

Build your inlets at the low points in your development before drawing the water pipes. The inlets can be placed freely but will snap roadside if you hold alt. I also Recommend using anarchy to place on top of roads or underwater.

Gravity Flow generally means that if you want water to flow from an inlet to this outlet the elevation of the inlet must be higher than the outlet, but that will depend on the Gravity Drainage Settings of Rainfall. See Rainfall Beta Guide.

Must be connected to your sewer and water system but only requires 1 water and 1 sewage. It does not contribute to the water or sewage because storm drain water is kept separate.

Storm Drain Inlets and Pumps direct any storm water that is collected to Underground Detention Basins within the same district first, and then to Gravity Storm Drain Outlets and SD Force Main Outlets in the same district once the Detention Basins have reached 80% filled. Anything not included in a district is actually in District 0.


Line Not Connected - You don't have any outlets/detention basins in the same district. Add an outlet/detention basin in this district or move the inlet to another district with an outlet/detention basin.

Landfill Full - There is not enough outlet/detention capacity within this district. Build additional outlets/detention basins or wait for the storm to lessen.

No Place For Goods - Cannot gravity drain to outlet. You must either build a lower gravity storm drain outlet, a detention basin, or a SD Force Main outlet.

See Official Rainfall Guide for more details about the Rainfall Mod

Special Thanks to Ronxy69 for the Prop.

Special Thanks to Snow_Cat because without Asset AI Changer & Asset UI Priority Changer, the storm drain assets would not have been possible.

If you liked the mod don't forget to give it a Thumbs Up Rating!
If you loved the mod don't forget to make it a Favorite!
The Buttons for these are under the slideshow.